Skip to main content
Log in

Al electroplating on the AZ121 Mg alloy in an EMIC–AlCl3 ionic liquid containing ethylene glycol

  • Original Paper
  • Published:
Journal of Solid State Electrochemistry Aims and scope Submit manuscript

Abstract

To improve the corrosion resistance of Mg alloys, an Al layer was electrodeposited on the Mg surface from an ionic liquid of 1-ethyl-3-methylimidazolium chloride (EMIC) and aluminum chloride (AlCl3) at 283 K. A smooth surfaced Al electrodeposit can be electroplated in the AlCl3–EMIC ionic liquid by pulse electrolysis at 6.7 Hz and a duty ratio of 0.67. A denser and flatter Al layer was successfully electroplated on AZ121 substrate at the lower temperature of 283 K in an AlCl3–EMIC ionic liquid with 0.1 M ethylene glycol added.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. Song G, Atrens A (2003) Understanding magnesium corrosion—a framework for improved alloy performance. Adv Eng Mater 5:837–858

    Article  CAS  Google Scholar 

  2. Serikawa T, Henmi M, Yamaguchi T, Oginuma H, Kondo K (2006) Depositions and microstructures of Mg–Si thin film by ion beam sputtering. Surf Coat Technol 200:4233–4239

    Article  CAS  Google Scholar 

  3. Stippich F, Vera E, Wolf GK, Berg G (1998) Enhanced corrosion protection of magnesium oxide coatings on magnesium deposited by ion beam-assisted evaporation. Surf Coat Technol 103–104:29–35

    Article  Google Scholar 

  4. Ono S, Asami K, Masuko N (2001) Mater Trans JIM 42:1225–1231

    Article  CAS  Google Scholar 

  5. Sharma AK (1989) Chromate conversion coatings for magnesium-lithium alloys. Met Finish 73:872–878

    Google Scholar 

  6. Mizutani Y, Kim SJ, Ichino R, Okido M (2003) Anodizing of Mg alloys in alkaline solutions. Surf Coat Technol 169:143–146

    Article  Google Scholar 

  7. Wang YQ, Zheng MY, Wu K (2005) Microarc oxidation coating formed on SiCw/AZ91 magnesium matrix composite and its corrosion resistance. Mater Lett 59:1727–1731

    Article  CAS  Google Scholar 

  8. Chang JK, Chen SY (2007) Electrodeposition of aluminum on magnesium alloy in aluminum chloride (AlCl3)–1-ethyl-3-methylimidazolium chloride (EMIC) ionic liquid and its corrosion behavior. Electrochem Commun 9:1602–1606

    Article  CAS  Google Scholar 

  9. Pan SJ, Tsai WT, Chang JK (2010) Co-deposition of Al–Zn on AZ91D magnesium alloy in AlCl3–1-ethyl-3-methylimidazolium chloride ionic liquid. Electrochim Acta 55:2158–2162

    Article  CAS  Google Scholar 

  10. Tang J, Azumi K (2011) Optimization of pulsed electrodeposition of aluminum from AlCl3-1-ethyl-3-methylimidazolium chloride ionic liquid. Electrochim Acta 56:1130–1137

    Article  CAS  Google Scholar 

  11. Tabei Y, Ueda M, Ohtsuka T (2010) Surface finishing of Mg alloys by Al electroplating in AlCl3-EMIC ionic liquid. ECS Trans 33–7:563–570

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mikito Ueda.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Ueda, M., Hariyama, S. & Ohtsuka, T. Al electroplating on the AZ121 Mg alloy in an EMIC–AlCl3 ionic liquid containing ethylene glycol. J Solid State Electrochem 16, 3423–3427 (2012). https://doi.org/10.1007/s10008-012-1801-9

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10008-012-1801-9

Keywords

Navigation