Skip to main content
SpringerLink
Log in

Improved Longitudinal Displacement Profiles for Convergence Confinement Analysis of Deep Tunnels

  • Published:
Rock Mechanics and Rock Engineering Aims and scope Submit manuscript

Summary

Convergence-confinement analysis for tunneling is a standard approach for preliminary analysis of anticipated wall deformation and support design in squeezing ground. Whether this analysis is performed using analytical (closed form) solutions or with plane strain numerical models, a longitudinal displacement profile (LDP) is required to relate tunnel wall deformations at successive stages in the analysis to the actual physical location along the tunnel axis. This paper presents a new and robust formulation for the LDP calculation that takes into account the significant influence of ultimate (maximum) plastic radius. Even after all parameters are appropriately normalized, the LDP function varies with the size of the ultimate plastic zone. Larger yield zones take a relatively longer normalized distance to develop, requiring an appropriately calculated LDP. Failure to use the appropriate LDP can result in significant errors in the specification of appropriate installation distance (from the face) for tunnel support systems. Such errors are likely to result in failure of the temporary support. The equations presented here are readily incorporated into analytical solutions and a graphical template is provided for use with numerical modeling.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • C Carranza-Torres C Fairhurst (2000) ArticleTitleApplication of the convergence–confinement method of tunnel design to rock masses that satisfy the Hoek–Brown failure criterion Tunn Undergr Sp Tech 15 IssueID2 187–213 Occurrence Handle10.1016/S0886-7798(00)00046-8

    Article  Google Scholar 

  • Carranza-Torres C, Diederichs MS (2008) Mechanical analysis of a circular liner with particular reference to composite supports – e.g., liners consisting of shotcrete and steel sets, Submitted for review and publication to Tunn Undergr Sp Tech (December 2007)

  • Chern JC, Shiao FY, Yu CW (1998) An empirical safety criterion for tunnel construction. Proceedings of the Regional Symposium on Sedimentary Rock Engineering, Taipei, Taiwan, pp 222–227

  • ME Duncan Fama (1993) Numerical Modeling of Yield Zones in Weak Rock JA Hudson (Eds) Comprehensive Rock Engineering NumberInSeries2 Pergamon Oxford 49–75

    Google Scholar 

  • Hoek E, Brown ET (1980) Underground Excavations in Rock. Institution of Mining and Metallurgy, London, 527 pp

  • E Hoek MS Diederichs (2006) ArticleTitleEmpirical estimation of rock mass modulus Int J Rock Mech Min Sci 43 IssueID2 203–215 Occurrence Handle10.1016/j.ijrmms.2005.06.005

    Article  Google Scholar 

  • Hoek E, Carranza-Torres C, Corkum B (2002) Hoek-Brown criterion – 2002 edn. Proc. NARMS-TAC Conference, Toronto, 2002, Vol. 1, pp 267–273

  • Hoek E, Carranza-Torres C, Diederichs MS, Corkum B (2008) Kersten Lecture: Integration of geotechnical and structural design in tunnelling. Proceedings University of Minnesota 56th Annual Geotechnical Engineering Conference. Minneapolis, 29 February 2008, pp 1–53

  • Itasca (2006) FLAC3D. Version 3. Fast Lagrangian Analysis of Continua. 3D Version. www.itascacg.com

  • Marinos P, Hoek E (2000) GSI – A geologically friendly tool for rock mass strength estimation. Proc. GeoEng 2000 Conference, Melbourne, pp 1422–1442

  • YW Pan JJ Dong (1991) ArticleTitleTime-dependent Tunnel Convergence II. Advance Rate and Tunnel-Support Interaction Int J Rock Mech Min SciGeomech 28 IssueID6 477–488 Occurrence Handle10.1016/0148-9062(91)91123-9

    Article  Google Scholar 

  • M Panet (1993) Understanding deformations in tunnels JA Hudson ET Brown C Fairhurst E Hoek (Eds) Comprehensive Rock Engineering NumberInSeries1 Pergamon London 663–690

    Google Scholar 

  • Panet M (1995) Calcul des Tunnels par la Me’thode de Convergence–Confinement. Presses de l’Ecole Nationale des Ponts et Chausse’es, Paris, 178 p

  • Panet M, Guenot A (1982) Analysis of convergence behind the face of a tunnel. Proceedings, International Symposium Tunnelling’82, IMM, London, pp 197–204

  • Rocscience (2007) PHASE2. 2D finite element software. www.rocscience.com

  • W Schubert (1996) ArticleTitleDealing with squeezing conditions in Alpine tunnels Rock Mech Rock Engng 29 IssueID3 145–153 Occurrence Handle10.1007/BF01032651

    Article  Google Scholar 

  • T Unlu H Gercek (2003) ArticleTitleEffect of Poisson’s ratio on the normalized radial displacements occurring around the face of a circular tunnel Tunn Undergr Sp Tech 18 547–553 Occurrence Handle10.1016/S0886-7798(03)00086-5

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Royal Military College, Ontario, Canada

    N. Vlachopoulos

  2. Queen’s University, Ontario, Canada

    M. S. Diederichs

Authors
  1. N. Vlachopoulos
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. S. Diederichs
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. S. Diederichs.

Additional information

Correspondence: M. S. Diederichs, Associate Professor, Queen’s University, Ontario, Canada

Rights and permissions

Reprints and permissions

About this article

Cite this article

Vlachopoulos, N., Diederichs, M. Improved Longitudinal Displacement Profiles for Convergence Confinement Analysis of Deep Tunnels. Rock Mech Rock Eng 42, 131–146 (2009). https://doi.org/10.1007/s00603-009-0176-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00603-009-0176-4

Search

Navigation