Abstract
A novel functional nanocomposites microwave shielding material using natural rubber (NR) loaded with binary active fillers barium hexaferrite (BF) (BaFe12O19) and carbon nanoparticle (CB) were fabricated by conventional roll milling technique. Nanocrystalline barium hexaferrite with particle size of 16 nm were successfully synthesized by hydrothermal approach at low temperature. The surface morphology of the nanocomposites was investigated using X-ray, field emission scanning electron microscopy and transmission electron microscopy. The electrical resistivity of the nanocomposites is decreased with BF loading level. The dielectric constant of the composites is decreased with increasing microwave frequency. NR/BF nanocomposites were screened for electromagnetic interference (EMI) shielding effectiveness (SE) over a frequency band of 1–12 GHz. A maximum SE value is approximately 75 dB in the frequency range of 1–12 GHz for BF content of 20 wt % and thickness of 1 mm. An excellent agreement between the theoretically predicted SE and the measured data was found. These features collectively demonstrated the potential of NR/BF nanocomposites for versatile applications in microwave shielding application and commercial electronic devices issues.
Similar content being viewed by others
References
Aal NA, Al-Hazmi F, Ahmed A, Al-Ghamdi AA, El-Tantawy F, Yakuphanoglu F (2014) A novel facile synthesis and electromagnetic wave shielding effectiveness at microwave frequency of graphene oxide paper. Microsyst Technol. doi:10.1007/s00542-014-2311-8
Abdi MM, Kassim AB, Mahmud HNME, Yunus WMM, Talib ZA (2010) Electromagnetic interference shielding effectiveness of new conducting polymer composite. J Macromol Sci Part A Pure Appl Chem 47:71–75
Al-Ghamdi AA, El-Tantawy F (2010) New electromagnetic wave shielding effectiveness at microwave frequency of polyvinyl chloride reinforced graphite/copper nanoparticles. Compos Part A 41:1693–1701
Al-Ghamdi AA, Al-Hartomy OA, Al-Salamy F, Al-Ghamdi AA, El-Mossalamy EH, Abdel Daiem AM, El-Tantawy F (2012) Novel electromagnetic interference shielding effectiveness in the microwave band of magnetic nitrile butadiene rubber/magnetite nanocomposites. J Appl Polym Sci 125(4):2604–2613
Al-Ghamdi AA, Al-Hartomy OA, Al-Solamy F, Al-Ghamdi AA, El-Tantawy F (2013) Electromagnetic wave shielding and microwave absorbing properties of hybrid epoxy resin/foliated graphite nanocomposites. J Appl Polym Sci 127(3):2227–2234
Al-Ghamdi AA, Al-HartomyOA, El-Tantawy F, Yakuphanoglu F. (2014) Novel polyvinyl alcohol/silver hybrid nanocomposites for high performance electromagnetic wave shielding effectiveness. Microsyst Technol. doi:10.1007/s00542-014-2120-0
Al-Hartomy OA, Al-Ghamdi A, Dishovsky N, Shtarkova R, Iliev V, Mutlay I, El-Tantawy F (2014) Effects of multi-walled carbon nanotubes on the dielectric and microwave properties of natural rubber-based composites. Fuller Nanotub Carbon Nanostruct 22:618–629
Annadurai P, Mallick AK, Tripathy DK (2002) Studies on microwave shielding materials based on ferrite and carbon black-filled epdm rubber in the X-band frequency. J Appl Polym Sci 83:145–150
El-Tantawy F, Aal NA, Al-Ghamdi AA, El-Mossalamy EH (2009) New smart conducting elastomer blends of bi-based superconductor ceramics nanoparticles reinforced natural rubber/low-density polyethylene for double thermistors, antistatic protectors, and electromagnetic interference shielding effectiveness applications. Polym Eng Sci 49(3):592–601
Flaifel MH, Ahmad SH, Hassan A, Bahri S, Tarawneh MAA, Yu LJ (2013) Thermal conductivity and dynamic mechanical analysis of NiZn ferrite nanoparticles filled thermoplastic natural rubber nanocomposite. Compos Part B 52:334–339
Joseph Nina, Sebastian MT (2013) Electromagnetic interference shielding nature of PVDF-carbonyl iron composites. Mater Lett 90:64–67
Kruželák J, Ušaková M, Dosoudil R, Hudec I, Sýkora R (2014) Microstructure and performance of natural rubber based magnetic composites. Polym Plast Technol Eng 53(11):1095–1104
Park KY, Lee SE, Kim CG, Han JH (2007) Application of MWNT-added glass fabric/epoxy composites to electromagnetic wave shielding enclosures. Compos Struct 81:401–406
Vinayasree S, Soloman MA, Sunny V, Mohanan P, Kurian P, Anantharaman MR (2013) A microwave absorber based on strontium ferrite–carbon black-nitrile rubber for S and X-band applications. Compos Sci Technol 82:69–75
Xu C, Liu J, Zhu X, Zhu Y, Xiong X, Cheng X (2014) Electromagnetic interference shielding boards produced using tetra paks waste and iron fiber. J. Mater Cycles Waste Manag. doi:10.1007/s10163-014-0255-9
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yakuphanoglu, F., Al-Ghamdi, A.A. & El-Tantawy, F. Electromagnetic interference shielding properties of nanocomposites for commercial electronic devices. Microsyst Technol 21, 2397–2405 (2015). https://doi.org/10.1007/s00542-014-2394-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-014-2394-2