Abstract
The smart integrated systems of tomorrow would demand a combination of micromechanical components and traditional electronics. On-chip solutions will be the ultimate goal. One way of making such systems is to implement the mechanical parts in an ordinary CMOS process. This procedure has been used to design an oscillator consisting of a resonating cantilever beam and a CMOS Pierce feedback amplifier. The resonating frequency is changed if the beam is bent by external forces. The paper describes central features of this procedure and highlights the design considerations for the CMOS-MEMS oscillator. The circuit is used as an example of a “VLSI designer” way of making future integrated micromechanical and microelectronic systems on-chip. The possibility for expansion to larger systems is reviewed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Brand O, Fedder GK (2005) CMOS–MEMS, Wiley, London, pp 28–57
Chen F, Brotz J, Arslan U, Lo C-C, Mukherjee T, Fedder GK (2005) CMOS-MEMS resonant RF mixer-filters, micro electro mechanical systems conference, pp 24–27
CMP annual users meeting (2007) 18.January, http://cmp.imag.fr/download/slides/slides2007/06_KT_MEMS.pdf
Fedder GK, Reed ML, Eagle SC, Guillou DF, Lu MS-C, Carley LR (1996) Laminated high-aspect-ratio microstructures in a conventional CMOS process. Sens Actuators A57:103–110
Franke AE, Heck JM, King T-J, Howe RT (2003) Polycrystalline silicon-germanium films for integrated microsystems. J Microelectromech Syst 12(2):160–171
Li S-S, Lin Y-W, Ren Z, Nguyen CT-C (2005) Self-switching vibrating micromechanical filter bank. In: IEEE int frequency control/precision time and time interval symposium, August, pp 135–141
Lin Y-W, Lee S, Li S-S, Xie Y, Ren Z, Nguyen CT-C (2004) Series-resonant VHF micromechanical resonator reference oscillators. J Solid-State Circuits 39(12):2477–2491
Luo H, Zhang G, Carley LR, Fedder GK (2002) A post-CMOS micromechanical lateral accelerometer. J Micromech Syst 11(3):188–195
Nguyen CT-C (1994) Micromechanical signal processors, Ph.D. Dissertation, University of California at Berkeley, Berkeley
Nguyen CT-C (1999) Microelectromechanical components for miniaturized low-power communications. In: IEEE int microwave symposium, RF MEMS workshop, 18 June, pp 48–77
Nguyen CT-C (2005) MEMS technology for timing and frequency control. In: IEEE int frequency control/precision time and time interval symposium, August, pp 1–11
Oz A, Fedder GK (2004) CMOS/BiCMOS self-assembly and electrothermal microactuators for tunable capacitors, gap-closing structures and latch mechanicsms, solid-state sensor, actuator and microsystems workshop, pp 212–215
Ramachandran D, Oz A, Saraf VK, Fedder GK, Mukherjee T (2004) MEMS-enabled reconfigurable VCO and RF Filter. In: IEEE radio frequency integrated circuits symposium (RFIC’94), June, pp 251–254
Rantakari P, Kaajakari V, Mattila T, Kiihamaki J, Oja A, Tittonen I, Seppa H (2005) Low noise, low power micromechanical oscillator. Solid-State Sens Actuators Microsyst 2:2135–2138
Vittoz EA, Degrauwe M, Bitz S (1988) High performance crystal oscillator circuits: theory and application. J Solid-State Circuits 23(3):774–783
Zhu X (2002) Post-CMOS micromachining of surface and bulk structures, Ph.D. Dissertation, Carnegie Mellon University
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Soeraasen, O., Ramstad, J.E. From MEMS devices to smart integrated systems. Microsyst Technol 14, 895–901 (2008). https://doi.org/10.1007/s00542-007-0523-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-007-0523-x