Abstract
Deburring and smooth finishing processes for milled workpieces are well known in macro mould and die manufacturing. These processes are not directly transferable to micro parts and must be modified for this purpose. Therefore, deburring and surface conditioning by micro peening and ultrasonic wet peening of structures made by micro milling of quenched and tempered tool steel are investigated. The results are presented in this paper.
Similar content being viewed by others
References
Horsch Ch, Schulze V, Löhe D (2003) Topography and microstructure of cavities obtained by micro-milling of tool steel. In: Werkstoffwoche-Partnerschaft GbR (ed) Proceedings of materials week 2002, Werkstoff-Informationsgesellschaft mbH, Frankfurt. ISBN 3-88355-314-X, pp 1–7
Horsch Ch, Schulze V, Löhe D (2005) Material states and surface conditioning for mold inserts. In: Löhe D, Haußelt J (eds) Advanced micro and nanosystems vol 3. Micro-engineering in metals and ceramics, Wiley-VCH, Weinheim (in press)
Weule H, Hüntrup V, Tritschler H (2001) Microcutting of steel to meet new requirements in miniaturisation. Ann CIRP vol 50(1):61–64
Pohlman R, Lierke E-G, Gregor M (1965) Über Ultraschall-Kavitationsvorgänge an Festkörperoberflächen, Westdeutscher Verlag, Köln und Opladen
Knapp RT, Daily J, Harnmit F (1970) Cavitation. McBrown-Hill Book Co, New York, pp 343–347
Horsch Ch, Schulze V, Löhe D (2005) Feinstbearbeitung gefräster Mikrostrukturen aus Werkzeugstahl, In: Dilthey U, Dorfmüller TH (eds) Kolloquium Mikroproduktion---Fortschritte. Verfahren, Anwendungen, Mainz Verlag, Aachen, pp 197–204
Acknowledgements
The financial support of the investigations performed, which were carried out in the collaborative research centre 499 “Development, production and quality assurance of moulded micro-components made out of metallic and ceramic materials” of the DFG is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Horsch, C., Schulze, V. & Löhe, D. Deburring and surface conditioning of micro milled structures by micro peening and ultrasonic wet peening. Microsyst Technol 12, 691–696 (2006). https://doi.org/10.1007/s00542-006-0087-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-006-0087-1