Abstract
In this paper, the Preisach model of hysteresis, which was already successfully implemented for solving problems of cyclic plasticity of axially loaded bar and cyclic bending of elastoplastic beam, is extended to the structural analysis of trusses subjected to cyclic loading. Although there are numerous well-known models of cyclic plasticity defined, in this paper, it is shown that for uniaxial stress state, hysteresis can be defined, based on the experimental data, in one particular rigorously mathematical form and implemented in finite element equations for trusses subjected to cyclic loading in the plastic domain. Using finite element method, equilibrium equations are obtained and algorithm for numerical solution is defined. Some advantages of this approach are underlined, compared with already existing procedures, such as the Bouc–Wen model implemented in SAP2000 program and generalized plasticity model shown on various numerical examples.
Similar content being viewed by others
References
Preisach F.: Über die magnetische Nachwirkung. Z. Phys. 94, 277–302 (1935)
Lubarda, A.V., Sumarac, D., Krajcinovic, D.: Hysteretic response of ductile materials subjected to cyclic loads. In: Ju, J.W. (ed.) Recent Advances in Damage Mechanics and Plasticity, vol. 123, pp. 145–157. ASME Publication, AMD (1992)
Lubarda A.V., Sumarac D., Krajcinovic D.: Preisach model and hysteretic behavior of ductile materials. Eur. J. Mech. A/Solids 12(4), 445–470 (1993)
Erlicher, S.: Hysteretic degrading models for the low-cycle fatigue behavior of structural elements. Theory, Numerical Aspects and Applications, Dottorato di ricerca in Modellazione, Conservazione e Controllo dei Materiali e delle Strutture, Universita degli studi di Trento (2003)
Sumarac D., Stosic S.: The Preisach model for the cyclic bending of elasto-plastic beams. Eur. J. Mech. A/Solids 15(1), 155–172 (1996)
Šumarac D., Petrašković Z.: Hysteretic behavior of rectangular tube (box) sections based on Preisach model. Arch. Appl. Mech. 82(10), 1663–1673 (2012)
Bouc, R.: Modèle Mathématique d’Hystérésis. Acustica, 24, 16–25 (1971) (in French)
Wen Y.K.: Method for random vibration of hysteretic systems. J. Eng. Mech. Div. Proc. ASCE 102, 249–263 (1976)
Ismail M., Ikbouane F., Rodellar J.: The hysteresis Bouc–Wen model, a survey. Arch. Comput. Methods. Eng. 16, 161–188 (2009)
CSI Analysis Reference Manual for SAP2000, ETABS, SAFE and CSiBridge, Computers and Structures Inc. (2009)
Kostic S., Filippou F., Lee C.L.: An efficient beam–column element for inelastic 3D frame analysis. Comput. Methods Appl. Sci. 30, 49–67 (2013)
Mayergoyz I.D.: Mathematical Models of Hysteresis. Springer, New York (1991)
Iwan W.D.: On a class of models for the yielding behavior of continuous and composite systems. J. Appl. Mech. ‘34, 612–617 (1967)
Asaro R.J.: Elastic–plastic memory and kinematic type hardening. Acta Metall. 23, 1255–1265 (1975)
Kujawski D., Krempl E.: The rate (time)-dependent behaviour of Ti–7Al–2Cb–1Ta titanium alloy at room temperature under quasi static monotonic and cyclic loading. J. Appl. Mech. 48, 55–63 (1981)
Lubliner J., Taylor R.L., Auricchio F.: A new model of generalized plasticity and its numerical implementation. Int. J. Solids Stuct. 30(22), 3171–3184 (1993)
Bathe K.J.: Finite Element Procedures. Prentice Hall, Englewood Cliffs (1996)
Puglisi G., Truskinovsky L.: Thermodynamics of rate-independent plasticity. J. Mech. Phys. Solids 53(3), 655–679 (2005)
Bever M.B., Holt D.L., Titchener A.L.: The stored energy of cold work. Prog. Mater. Sci. 17, 1–190 (1972)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Šumarac, D., Perović, Z. Cyclic plasticity of trusses. Arch Appl Mech 85, 1513–1526 (2015). https://doi.org/10.1007/s00419-014-0954-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-014-0954-7