Abstract
The governing equations of electrohydrodynamics pertinent to forced and free electroconvection have been examined in the context of an array of charge injection atomization systems for dielectric electrically insulating liquids. The underlying physics defining their operation has been described further by linking the internal charge injection process inside the atomizer with resulting charged liquid jet characteristics outside it. A new nondimensional number termed the electric jet Reynolds number Re E,j is required to describe charge injection systems universally. The electric jet Reynolds number Re E,j varies linearly with the inter-electrode gap electric Reynolds number Re E, and the inter-electrode gap Reynolds number Re E varies linearly with the conventional liquid jet Reynolds number Re j. These variations yield two new seemingly universal constants relevant in the description of two-phase charge injection systems. The first constant being \(\left( {\frac{{Q_{{\text{V}}} d}}{\epsilon }} \right)\left( {\frac{1}{E}} \right)\left( {\frac{d}{L}} \right)\sim 0.06\) which physically represents the ratio of jet to inter-electrode gap electric field multipled by a nondimensional geometric factor while it may also be physically seen as a forced flow charge injection strength term, analogous to the ‘C’ term described in single-phase free electroconvection. The second constant being \(\left(\frac{\kappa E}{U_{\rm inj}}\right)\left(\frac{L}{d}\right)\sim0.6\) which physically represents the ratio of inter-electrode gap ionic drift velocity, to the liquid jet velocity, multipled by a nondimensional geometric factor. These scalings have been found to be valid for charge injection systems regardless of fuel, voltage pulsation, electrode shape, orifice diameter, and inter-electrode gap length.
Similar content being viewed by others
References
AL-Ahmad G, Shrimpton J, Ergene E, Mashayek F (2009) Electrical performance of a charge injection atomizer using viscous organic oils. At Sprays 19:547–566
Allen J, Ravenhill P, Shrimpton JS (2005) Spray characteristics of a novel multi orifice electrostatic atomizer. In: Proceedings of the 20th ILASS Europe meeting pp 373–377
Anderson E, Carlucci A, de Risi A, Kyritsis D (2007) Experimental investigation of the possibility of automotive gasoline spray manipulation through electrostatic field. Int J Veh Des 45:61–79
Atten P (1996) Electrohydrodynamic instability and motion induced by injected space charge in insulating liquids. IEEE Trans Dielectr Electr Insul 3:1–17
Atten P (1998) Instability and convection induced by injected space charge. In: Castellanos A (ed) Electrohydrodynamics, 1st edn. Springer, New York, pp 213–262
Atten P, Malraison B, Zahn M (1997) Electrohydrodynamic plumes in point-plane geometry. IEEE Trans Dielectr Electr Insul 4:710–718
Balachandran W, Machowski W, Halimic M, Morgan L, Gray C, Wilson C (1999) Development of an electrostatic nozzle for gas turbine applications. In: Proceedings of ILASS, Toulouse, France
Bankston C, Back L, Kwack E, Kelly A (1988) Experimental investigation of electrostatic dispersion and combustion of diesel fuel jets. J Eng Turbines Power 110:361–368
Castellanos A (1991) Coulomb-driven convection in electrohydrodynamics. IEEE Trans Electr Insul 26:1201–1215
Castellanos A (1998) Basic concepts and equations in electrohydrodynamics. In: Castellanos A (ed) Electrohydrodynamics, 1st edn. Springer, New York, pp 1–62
Castellanos A, Agrait N (1992) Unipolar injection induced instabilities in plane parallel flows. IEEE Trans Ind Appl 28:513–519
Chicon R, Castellanos A, Martin E (1997) Numerical modelling of coulomb-driven convection in insulating liquids. J Fluid Mech 344:46–66
Faeth G, Hsiang L, Wu P (1995) Structure and breakup properties of sprays. Int J Multiph Flow 21:99–127
Kasayapanand N, Kiatsiriroat T (2007) Numerical modeling of the electrohydrodynamic effect to natural convection in vertical channels. Int Commun Heat Mass Transf 34:162–175
Kelly A (1984) The electrostatic atomization of hydrocarbons. J Inst Energy 57:312–320
Kelly A (1990) Charge injection electrostatic atomizer modelling. Aerosol Sci Technol 12:526–537
Kim K, Turnbull J (1976) Generation of charged drops of insulating liquids by electrostatic spraying. J Appl Phys 47:1964–1969
Kourmatzis A (2011) Pulsed charge injection atomization and turbulent electrohydrodynamics. PhD Thesis, The University of Southampton, Southampton, UK
Kourmatzis A, Shrimpton J (2011) Electrical and transient atomization characteristics of a pulsed charge injection atomizaer using electrically insulating liquids. J Electrost 69:157–167
Kourmatzis A, Shrimpton J (2012) Design and charge injection characteristics of an electrostatic dielectric liquid pulsed atomizer. J Electrost 70:249–257
Kourmatzis A, Shrimpton J (2012) Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates. J Fluid Mech 696:228–262
Kourmatzis A, Ergene E, Shrimpton J, Kyritsis D, Mashayek F, Huo M (2012) Combined aerodynamic and electrostatic atomization of dielectric liquid jets. Exp Fluids 53:221–235
Kwack E, Back L, Bankston C (1989) Electrostatic dispersion of diesel fuel jets at high back pressure. ASME Trans 111:578–586
Lacroix J, Atten P, Hopfinger E (1975) Electro-convection in a dielectric liquid layer subjected to unipolar injection. J Fluid Mech 69:539–564
Lara J, Castellanos A, Pontiga F (1997) Destabilization of plane poiseuille flow of insulating liquids by unipolar charge injection. Phys Fluids 9:399–406
Lara J, Pontiga F, Castellanos A (1998) Stability analysis of a Taylor-Couette flow of insulating fluid subjected to radial unipolar injection of charge. Phys Fluids 10:3088–3098
Louste C, Daaboul M, Traore P, Romat H (2012) Influence of signal properties on electrohydrodynamic primary break-up of thin sheets of dielectric liquid. In: ICLASS 12th Triennial conference, Heidelberg, Germany, September 2–6
Malkawi G (2010) Point-to-plane and plane-to-plane electrostatic charge injection atomization for insulating liquids. PhD Thesis, University of Illinois at Chicago, Chicago IL, USA
Nikitopoulos D, Kelly A (1999) Negatively charged spray. In: 52nd annual American Physical Society Division of fluid dynamics meeting, New Orleans
Perez A, Traore P, Koulova-Nenova D, Romat H (2009) Numerical study of an electrohydrodynamic plume between a blade injector and a flat plate. IEEE Trans Dielectr Electr Insul 16:448–455
Pontiga F, Castellanos A (1994) Physical mechanisms of instability in a liquid layer subjected to an electric field and thermal gradient. Phys Fluids 6:1684–1701
Pontiga F, Castellanos A, Malraison B (1995) Some considerations on the instabilities of nonpolar liquids subjected to charge injection. Phys Fluids 7:1348–1356
Rigit A (2003) Performance of a charge injection electrostatic atomizer and spray characteristics. PhD Thesis, Imperial College London, London, UK
Rigit A, Shrimpton J (2006) Electrical performance of charge injection electrostatic atomizers. At Sprays 16:401–419
Rigit A, Shrimpton J (2006) Spray characteristics of charge injection electrostatic atomizers with small-orifice diameters. At Sprays 16:421–442
Rigit A, Shrimpton J (2009) Estimation of the diameter-charge distribution in polydisperse electrically charged sprays of electrically. Exp Fluids 46:1159–1171
Shrimpton JS (1995) Electrostatic atomization and combustion of hydrocarbon oils. PhD Thesis, UMIST, Manchester, UK
Shrimpton J, Laoonual Y (2006) Dynamics of electrically charged transient evaporating sprays. Int J Numer Methods Eng 67:1063–1081
Shrimpton J, Yule A (2003) Electrohydrodynamics of charge injection atomization: Regimes and fundamental limits. At Sprays 12:173–190
Shrimpton JS, Yule AJ (1999) Characterization of charged hydrocarbon sprays for application in combustion systems. Exp Fluids 26:460–469
Shrimpton JS, Yule AJ (2004) Design issues concerning charge injection atomizers. At Sprays 14:127–142
Soldati A, Banerjee S (1998) Turbulence modification by large-scale organized electrohydrodynamic flows. Phys Fluids 10:1742–1756
Traore P, Perez A, Koulova D, Romat H (2010) Numerical modelling of finite-amplitude electro-thermo-convection in a dielectric liquid layer subjected to both unipolar injection and temperature gradient. J Fluid Mech 658:279–293
Vazquez P, Perez A, Castellanos A (1996) Thermal and electrohydrodynamic plumes: a comparative study. Phys Fluids 8:2091–2096
Vazquez P, Gheorgiou G, Castellanos A (2006) Characterization of injection instabilities in electrohydrodynamics by numerical modelling: comparison of particle in cell and flux corrected transport methods for electroconvection between two plates. J Phys D Appl Phys 39
Vazquez P, Gheorgiou G, Castellanos A (2008) Numerical analysis of the stability of the electrohydrodynamic (EHD) electroconvection between two plates. J Phys D Appl Phys 41:175303
Yule A, Shrimpton J, Watkins A, Balachandran W, Hu D (1995) Electrostatically atomized hydrocarbon sprays. Fuel 74:1094–1103
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kourmatzis, A., Shrimpton, J.S. Electrohydrodynamic inter-electrode flow and liquid jet characteristics in charge injection atomizers. Exp Fluids 55, 1688 (2014). https://doi.org/10.1007/s00348-014-1688-6
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00348-014-1688-6