Abstract
Photocatalysis is the process which used to remove the dye from the effluent. Here, we have used earth-abundant chalcogenide Cu2SnS3 (CTS) thin film as a photocatalyst to remove the dye (methylene blue) under visible light irradiation. A low cost ultrasonic spray pyrolysis was used to deposit the film on soda-lime glass substrate in a single step at optimized temperature 500 °C. The structural, morphological and optical properties of the CTS film have been studied using XRD, SEM and UV–Vis spectroscopy. Structural analysis confirms the formation of Cu2SnS3 tetragonal structure without any secondary impurities. SEM image indicates the surface of this film is smooth and uniform. Bandgap of film is found to be 1.35 eV. Photocatalysis activity of CTS thin film is studied by degrading methylene blue (MB) dye (1 × 10–5 M) in water solution under visible light irradiation. It degrades 90% MB in 3 h. To evaluate the industrial effluent, we have studied the photocatalytic activity in different pH (4, 7, 9) medium. It shows that the MB degradation is faster in the base medium compare to acidic or neutral medium. It takes 1 h to degrade 90% dye in base medium. Films are showing good repeatable performance of the photocatalytic activity.
Graphical abstract
Similar content being viewed by others
References
A.B. Djurišić, Y.H. Leung, A.M.C. Ng, Strategies for improving the efficiency of semiconductor metal oxide photocatalysis. Mater. Horizons. 1, 400–410 (2014)
N. Shaham-Waldmann, Y. Paz, Away from TiO2: a critical minireview on the developing of new photocatalysts for degradation of contaminants in water. Mater. Sci. Semicond. Process. 42, 72–80 (2016). https://doi.org/10.1016/j.mssp.2015.06.068
A. Mills, S. Le Hunte, An overview of semiconductor photocatalysis. J. Photochem. Photobiol. A Chem. 108, 1–35 (1997)
I.A. Perales-Martínez, V. Rodríguez-González, S.W. Lee, S. Obregón, Facile synthesis of InVO4/TiO2 heterojunction photocatalysts with enhanced photocatalytic properties under UV-vis irradiation. J. Photochem. Photobiol. A Chem. 299, 152–158 (2015). https://doi.org/10.1016/j.jphotochem.2014.11.021
H. Han, R. Bai, Highly effective buoyant photocatalyst prepared with a novel layered-TiO2 configuration on polypropylene fabric and the degradation performance for methyl orange dye under UV–Vis and Vis lights. Sep. Purif. Technol. 73, 142–150 (2010)
Y. Li, J. Yan, Q. Su, E. Xie, W. Lan, Preparation of graphene–TiO2 nanotubes/nanofibers composites as an enhanced visible light photocatalyst using a hybrid synthetic strategy. Mater. Sci. Semicond. Process. 27, 695–701 (2014)
A. Di Mauro, M. Cantarella, G. Nicotra, V. Privitera, G. Impellizzeri, Low temperature atomic layer deposition of ZnO: applications in photocatalysis. Appl. Catal. B Environ. 196, 68–76 (2016)
A. Samad, M. Furukawa, H. Katsumata, T. Suzuki, S. Kaneco, Photocatalytic oxidation and simultaneous removal of arsenite with CuO/ZnO photocatalyst. J. Photochem. Photobiol. A Chem. 325, 97–103 (2016)
M.K. Singha, A. Patra, V. Rojwal, K.G. Deepa, D. Kumar, Ultrasonic spray pyrolysis deposited ZnO thin film for photocatalytic activity. AIP Conf. Proc. 2082, 030023 (2019). https://doi.org/10.1063/1.5093841
M.K. Singha, A. Patra, Highly efficient and reusable ZnO microflower photocatalyst on stainless steel mesh under UV-Vis and natural sunlight. Opt. Mater. 107, 110000 (2020)
A. Samad, M. Furukawa, H. Katsumata, T. Suzuki, S. Kaneco, Single step fabrication of ZnO microflower thin films for highly efficient and reusable photocatalytic activity. J. Mater. Sci.: Mater. Electron. 325, 13578–13587 (2020)
Y. Tan, Z. Lin, W. Ren, W. Long, Y. Wang, X. Ouyang, Facile solvothermal synthesis of Cu2SnS3 architectures and their visible-light-driven photocatalytic properties. Mater. Lett. 89, 240–242 (2012). https://doi.org/10.1016/j.matlet.2012.08.117
F. Vaquero, R.M. Navarro, J.L.G. Fierro, Influence of the solvent on the structure, morphology and performance for H2 evolution of CdS photocatalysts prepared by solvothermal method. Appl. Catal. B Environ. 203, 753–767 (2017)
S.K. Batabyal, S.E. Lu, J.J. Vittal, Synthesis, characterization, and photocatalytic properties of In2S3, ZnIn2S4, and CdIn2S4 nanocrystals. Cryst. Growth Des. 16, 2231–2238 (2016)
R. Sumi, A.R. Warrier, C. Vijayan, Visible-light driven photocatalytic activity of $β$-indium sulfide (In2S3) quantum dots embedded in Nafion matrix. J. Phys. D. Appl. Phys. 47, 105103 (2014)
N. Ding, Y. Fan, Y. Luo, D. Li, Q. Meng, Enhancement of H2 evolution over new ZnIn2S4/RGO/MoS2 photocatalysts under visible light. APL Mater. 3, 104417 (2015)
M.A. Zhukovskiy, A.L. Stroyuk, V.V. Shvalagin, N.P. Smirnova, O.S. Lytvyn, A.M. Eremenko, Photocatalytic growth of CdS, PbS, and CuxS nanoparticles on the nanocrystalline TiO2 films. J. Photochem. Photobiol. A Chem. 203, 137–144 (2009)
X. Yang, Z. Wang, X. Lv, Y. Wang, H. Jia, Enhanced photocatalytic activity of Zn-doped dendritic-like CdS structures synthesized by hydrothermal synthesis. J. Photochem. Photobiol. A Chem. 329, 175–181 (2016)
Q. Wang, Q. Gao, A.M. Al-Enizi, A. Nafady, S. Ma, Recent advances in MOF-based photocatalysis: environmental remediation under visible light. Inorg. Chem. Front. 7, 300–339 (2020)
B. Singh, J. Na, M. Konarova, T. Wakihara, Y. Yamauchi, C. Salomon, M.B. Gawande, Functional mesoporous silica nanomaterials for catalysis and environmental applications. Bull. Chem. Soc. Jpn. 93, 1459–1496 (2020)
X. Zhan, C. Si, J. Zhou, Z. Sun, MXene and MXene-based composites: synthesis, properties and environment-related applications. Nanoscale Horiz. 5, 235–258 (2020)
S. Rahaman, M.K. Singha, M.A. Sunil, K. Ghosh, Effect of Copper concentration on CTS thin films for solar cell absorber and photocatalysis application. Superlatt. Microstruct. 147, 106589 (2020)
S. Rahaman, M.A. Sunil, M.K. Singha, K. Ghosh, Studies of ultrasonically sprayed Cu2SnS3 thin films by varying Sn concentration. Mater. Today Proceed. (2021). https://doi.org/10.1016/j.matpr.2021.02.657
S. Rahaman, M.A. Sunil, M.K. Singha, K. Ghosh, Ultrasonic spray pyrolysis deposited CTS thin film: variation of thiourea concentration in the film. Mater. Today Proceed. (2021). https://doi.org/10.1016/j.matpr.2021.04.513
Q. Ren, W. Wang, H. Shi, Y. Liang, Synthesis and shape-dependent visible-light-driven photocatalytic activities of Cu2ZnSnS4 nanostructures, Micro. Nano Lett. 9, 505–508 (2014)
J. Zai, F. Cao, N. Liang, K. Yu, Y. Tian, H. Sun, X. Qian, Rose-like I-doped Bi2O2CO3 microspheres with enhanced visible light response: DFT calculation, synthesis and photocatalytic performance. J. Hazard. Mater. 321, 464–472 (2017). https://doi.org/10.1016/j.jhazmat.2016.09.034
J. Zhong, Q. Wang, D. Chen, L. Chen, H. Yu, H. Lu, Z. Ji, Biomolecule-assisted solvothermal synthesis of 3D hierarchical Cu2 FeSnS4 microspheres with enhanced photocatalytic activity. Appl. Surf. Sci. 343, 28–32 (2015). https://doi.org/10.1016/j.apsusc.2015.03.066
M. Nakashima, T. Yamaguchi, H. Itani, J. Sasano, M. Izaki, Cu2SnS3 thin film solar cells prepared by thermal crystallization of evaporated Cu/Sn precursors in sulfur and tin atmosphere. Phys. Status Solidi. 12, 761–764 (2015)
S. Vadivel, D. Maruthamani, B. Paul, S.S. Dhar, A. Habibi-Yangjeh, S. Balachandran, B. Saravanakumar, A. Selvakumar, K. Selvam, Biomolecule-assisted solvothermal synthesis of Cu2SnS3 flowers/RGO nanocomposites and their visible-light-driven photocatalytic activities. RSC Adv. 6, 74177–74185 (2016). https://doi.org/10.1039/c6ra12068g
S. Rahaman, M.A. Sunil, M.K. Singha, K. Ghosh, Temperature dependent growth of Cu2SnS3 thin films using ultrasonic spray pyrolysis for solar cell absorber layer and photocatalytic application. Mater. Res. Exp. 6, 106417 (2019)
B. Patel, M. Waldiya, A. Ray, Highly phase-pure spray-pyrolysed Cu2SnS3 thin films prepared by hybrid thermal treatment for photovoltaic applications. J. Alloys Compd. 745, 347–354 (2018). https://doi.org/10.1016/j.jallcom.2018.02.220
V.V. Brus, I.S. Babichuk, I.G. Orletskyi, P.D. Maryanchuk, V.O. Yukhymchuk, V.M. Dzhagan, I.B. Yanchuk, M.M. Solovan, I.V. Babichuk, Raman spectroscopy of Cu-Sn-S ternary compound thin films prepared by the low-cost spray-pyrolysis technique. Appl. Opt. 55, B158–B162 (2016). https://doi.org/10.1364/AO.55.00B158
B. Patel, R.K. Pati, I. Mukhopadhyay, A. Ray, Effect of vacuum and sulphur annealing on the structural properties of spray deposited Cu2SnS3 thin films. Vacuum 158, 263–270 (2018)
S. Thiruvenkadam, D. Jovina, A.L. Rajesh, The influence of deposition temperature in the photovoltaic properties of spray deposited CZTS thin films. Sol. Energy. 106, 166–170 (2014)
D. Patidar, K.S. Rathore, N.S. Saxena, K. Sharma, T.P. Sharma, Energy band gap and conductivity measurement of CdSe thin films. Chalcogenide Lett. 5, 21–25 (2008)
T.S. Moss, Optical properties of semicoundutors (Academic Press, NY, 1959)
K.L. Chopra, S.R. Das, Thin Film Solar Cells (Plenum Press, New York, 1983)., (n.d.)
Y.-X. Guo, W.-J. Cheng, J.-C. Jiang, J.-H. Chu, The effect of substrate temperature, Cu/Sn ratio and post-annealing on the phase-change and properties of Cu2SnS3 film deposited by ultrasonic spray pyrolysis. J. Mater. Sci. Mater. Electron. 27, 4636–4646 (2016)
G. Poongodi, P. Anandan, R.M. Kumar, R. Jayavel, Studies on visible light photocatalytic and antibacterial activities of nanostructured cobalt doped ZnO thin films prepared by sol–gel spin coating method, Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 148, 237–243 (2015)
X. Zhang, X. Liu, C. Fan, Y. Wang, Y. Wang, Z. Liang, A novel BiOCl thin film prepared by electrochemical method and its application in photocatalysis. Appl. Catal. B Environ. 132, 332–341 (2013)
K.G. Deepa, P.C. Ramamurthy, M.K. Singha, Mesoporous Cu2ZnSnS4 nanoparticle film as a flexible and reusable visible light photocatalyst. Opt. Mater. (2019). https://doi.org/10.1016/j.optmat.2019.109492
N.M. Diantoro, A. Kusumaatmaja, K. Triyana, Study on photocatalytic properties of TiO2 nanoparticle in various pH condition IOP Conf Series. J Phys Conf Ser 1011, 012069 (2018)
A. Apostolopoulou, S. Mahajan, R. Sharma, E. Stathatos, Novel development of nanocrystalline kesterite Cu2ZnSnS4 thin film with high photocatalytic activity under visible light illumination. J. Phys. Chem. Solids. 112, 37–42 (2018)
Y.M. Hunge, M.A. Mahadik, V.L. Patil, A.R. Pawar, S.R. Gadakh, A.V. Moholkar, P.S. Patil, C.H. Bhosale, Visible light assisted photoelectrocatalytic degradation of sugarcane factory wastewater by sprayed CZTS thin films. J. Phys. Chem. Solids. 111, 176–181 (2017)
K. Shahzad, M.B. Tahir, M. Sagir, N.A. Alhakamy, M.R. Kabli, Synthesis of novel p-n heterojunction Cu2SnS3/Ti3+−TiO2 for the complete tetracycline degradation in few minutes and photocatalytic activity under simulated solar irradiation. Ceramics Int 47(22), 31337–31348 (2017)
C. Nefzi, M. Souli, Y. Cuminal, N. Kamoun-Turki, Effect of sulfur concentration on structural, optical and electrical properties of Cu2FeSnS4 thin films for solar cells and photocatalysis applications. Superlatt. Microstruct. 124, 17–29 (2018)
M.K. Singha, A. Patra, V. Rojwal, K.G. Deepa, Single-step fabrication of ZnO microflower thin films for highly efficient and reusable photocatalytic activity. J. Mater. Sci. Mater. Electron. 31, 13578–13587 (2020)
V. Maheskumar, B. Vidhya, Investigation on the morphology and photocatalytic activity of Cu3SnS4 synthesized by ball milling and solvothermal method. J. Photochem. Photobiol. A Chem. 356, 521–529 (2018). https://doi.org/10.1016/j.jphotochem.2017.12.026
F. Azeez, E. Al-Hetlani, M. Arafa, Y. Abdelmonem, A.A. Nazeer, M.O. Amin, M. Madkour, The effect of surface charge on photocatalytic degradation of methylene blue dye using chargeable titania nanoparticles. Sci. Rep. 8, 1–9 (2018). https://doi.org/10.1038/s41598-018-25673-5
I. Kazeminezhad, A. Sadollahkhani, Influence of pH on the photocatalytic activity of ZnO nanoparticles. J. Mater. Sci. Mater. Electron. 27, 4206–4215 (2016). https://doi.org/10.1007/s10854-016-4284-0
S.A. Phaltane, S.A.V.T.S. Bhat, P.S.P.S.D. Sartale, Photocatalytic degradation of methylene blue by hydrothermally synthesized CZTS nanoparticles. J Mater Sci Mater Electron (2017). https://doi.org/10.1007/s10854-017-6527-0
Acknowledgements
We thank to MNCF, IISc to provide us to use characterization facilities for above work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Rahaman, S., Singha, M.K. Nanoarchitectonics earth-abundant chalcogenide Cu2SnS3 thin film using ultrasonic spray pyrolysis for visible light-driven photocatalysis. Appl. Phys. A 128, 36 (2022). https://doi.org/10.1007/s00339-021-05174-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-021-05174-5