Abstract
New configurations for realizing inverse lowpass, inverse bandpass, inverse highpass and inverse bandreject filters using commercially available current feedback op-amps (CFOA) with an accessible z-terminal such as AD844 are presented. The workability of the proposed circuits has been confirmed by experimental results employing AD844 type CFOAs.
Similar content being viewed by others
References
Leuciuc A (1997) Using nullors for realisation of inverse transfer functions and characteristics. Electron Lett 33: 949–951
Chipipop B, Surakampontorn W (1999) Realisation of current-mode FTFN-based inverse filter. Electron Lett 35: 690–692
Wang HY, Lee CT (1999) Using nullors for realisation of current-mode FTFN-based inverse filters. Electron Lett 35: 1889–1890
Abuelma’atti MT (2000) Identification of cascadable current-mode filters and inverse-filters using single FTFN. Frequenz 54: 11–12
Stevenson JK (1984) Two-way circuits with inverse transmission properties. Electron Lett 20: 965–967
Rathore TS (1980) Network transformations. IEEE Trans Circuits Syst CAS-27: 57–59
Senani R (1987) A novel application of four-terminal floating nullors. Proc IEEE 75: 1544–1546
Yuce E, Tokat S, Minaei S, Cicekoglu O (2006) Low-component—count insensitive current-mode and voltage-mode PID, PI and PD controllers. Frequenz 60: 65–69
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gupta, S.S., Bhaskar, D.R., Senani, R. et al. Inverse active filters employing CFOAs. Electr Eng 91, 23–26 (2009). https://doi.org/10.1007/s00202-009-0112-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00202-009-0112-3