Skip to main content

Advertisement

Log in

Prediction and compensation of force-induced deformation for a dual-machine-based riveting system using FEM and neural network

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Force-induced deformation of machine tools has a great influence on the workpiece dimension and surface quality. For the dual-machine-based riveting system, the great squeezing force during riveting process not only causes structural deformation of the machine tools but also leads to inaccurate positioning of the riveting bar and dimension deviation of riveted joints. Moreover, the force-induced deformation usually changes with the varying poses of the machine tools, which makes it more difficult to predict precisely. In this paper, an efficient prediction and compensation method of force-induced deformation is developed based on finite element modeling (FEM) and artificial neural network. Firstly, a series of finite element models at selected poses are established to obtain the deformation data. Then, a force-induced deformation prediction model is established through radial basis function neural network with adaptive genetic algorithm optimization (AGA-RBF). Furthermore, a basic strategy is proposed to compensate for the predicted error through the motion commands modification. Finally, a contrast experiment is carried out to verify the feasibility and efficiency of the proposed method.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  1. Remley D, Rediger J, Haworth P, Holden R (2009) Slug rivet machine installs 16 rivets per minute drill-rivet-shave. SAE Technical Paper (No. 2009-01-3155)

  2. Stansbury EC, Bigoney B, Allen R (2014) E7000 high-speed CNC fuselage riveting cell. SAE Int J Mater Manuf 7(1):37–44

    Article  Google Scholar 

  3. Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools—a review: part I: geometric, cutting-force induced and fixture-dependent errors. Int J Mach Tools Manuf 40(9):1235–1256

    Article  Google Scholar 

  4. Lei C, Bi Y, Li J, Ke Y (2018) Experiment and numerical simulations of a slug rivet installation process based on different modeling methods. Int J Adv Manuf Technol 97:1481–1496

    Article  Google Scholar 

  5. Zhang Y, Bi Q, Yu L, Wang Y (2018) Online compensation of force-induced deformation for high-precision riveting machine based on force-displacement data analysis. Int J Adv Manuf Technol 94(1–4):941–956

    Article  Google Scholar 

  6. Deng C, Liu Y, Zhao J, Wei B, Yin G (2017) Analysis of the machine tool dynamic characteristics in manufacturing space based on the generalized dynamic response model. Int J Adv Manuf Technol 92(1–4):1411–1424

    Article  Google Scholar 

  7. Du Z, Zhang D, Hou H, Liang SY (2017) Peripheral milling force induced error compensation using analytical force model and APDL deformation calculation. Int J Adv Manuf Technol 88(9–12):3405–3417

    Article  Google Scholar 

  8. Slavkovic NR, Milutinovic DS, Glavonjic MM (2014) A method for off-line compensation of cutting force-induced errors in robotic machining by tool path modification. Int J Adv Manuf Technol 70(9–12):2083–2096

    Article  Google Scholar 

  9. Shi X, Liu H, Li H, Liu C, Tan G (2016) Comprehensive error measurement and compensation method for equivalent cutting forces. Int J Adv Manuf Technol 85(1–4):149–156

    Article  Google Scholar 

  10. Deng F, Tang Q, Li X, Yang Y, Zou Z (2018) Study on mapping rules and compensation methods of cutting-force-induced errors and process machining precision in gear hobbing. Int J Adv Manuf Technol 97(9–12):3859–3871

    Article  Google Scholar 

  11. Ratchev S, Liu S, Huang W, Becker AA (2006) An advanced FEA based force induced error compensation strategy in milling. Int J Mach Tools Manuf 46(5):542–551

    Article  Google Scholar 

  12. Zhao D, Bi Y, Ke Y (2018) An efficient error prediction and compensation method for coordinated five-axis machine tools under variable temperature. Int J Adv Manuf Technol 96:4431–4443

    Article  Google Scholar 

  13. Chen W, Xue J, Tang D, Chen H, Qu S (2009) Deformation prediction and error compensation in multilayer milling processes for thin-walled parts. Int J Mach Tools Manuf 49(11):859–864

    Article  Google Scholar 

  14. Raksiri C, Parnichkun M (2004) Geometric and force errors compensation in a 3-axis CNC milling machine. Int J Mach Tools Manuf 44(12–13):1283–1291

    Article  Google Scholar 

  15. Wang Z, Gong D, Li X, Li G, Zhang D (2017) Prediction of bending force in the hot strip rolling process using artificial neural network and genetic algorithm (ANN-GA). Int J Adv Manuf Technol 93(9–12):3325–3338

    Article  Google Scholar 

  16. Ma C, Zhao L, Mei X, Shi H, Yang J (2017) Thermal error compensation of high-speed spindle system based on a modified BP neural network. Int J Adv Manuf Technol 89(9–12):3071–3085

    Article  Google Scholar 

  17. Arnaiz-González Á, Fernández-Valdivielso A, Bustillo A, López De Lacalle LN (2016) Using artificial neural networks for the prediction of dimensional error on inclined surfaces manufactured by ball-end milling. Int J Adv Manuf Technol 83(5–8):847–859

    Article  Google Scholar 

  18. Wang L, Lee TC (2006) Prediction of limiting dome height using neural network and finite element method. Int J Adv Manuf Technol 27(11–12):1082–1088

    Article  Google Scholar 

  19. Rijck JJMD, Homan JJ, Schijve J, Benedictus R (2007) The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap joints. Int J Fatigue 29(12):2208–2218

    Article  Google Scholar 

  20. Chen L, Liu Y, Xie L (2007) Power-exponent function model for low-cycle fatigue life prediction and its applications–part II: life prediction of turbine blades under creep–fatigue interaction. Int J Fatigue 29(1):10–19

    Article  Google Scholar 

  21. Li G, Shi G, Bellinger NC (2006) Studies of residual stress in single-row countersunk riveted lap joints. J Aircr 43(3):592–599

    Article  Google Scholar 

  22. “Manual of aircraft riveting assembly process” writing group (1984) Manual of aircraft riveting assembly process. National Defense Industry Press, Beijing

  23. Baha S II, Hesebeck O (2010) Simulation of the solid rivet installation process. SAE Int J Aerosp 3:187–197

    Article  Google Scholar 

  24. Zhang K, Cheng H, Li Y (2011) Riveting process modeling and simulating for deformation analysis of aircraft's thin-walled sheet-metal parts. Chin J Aeronaut 24(3):369–377

    Article  Google Scholar 

  25. Sonar DK, Dixit US, Ojha DK (2006) The application of a radial basis function neural network for predicting the surface roughness in a turning process. Int J Adv Manuf Technol 27(7–8):661–666

    Article  Google Scholar 

  26. Luo M, Shin YC (2015) Estimation of keyhole geometry and prediction of welding defects during laser welding based on a vision system and a radial basis function neural network. Int J Adv Manuf Technol 81(1–4):263–276

    Article  Google Scholar 

  27. Holland JH (1992) Adaptation in natural and artificial systems: an introductory analysis with applications to biology, control, and artificial intelligence. MIT Press, Cambridge

    Book  Google Scholar 

  28. Dao TP, Huang SC (2015) Design, fabrication, and predictive model of a 1-DOF translational flexible bearing for high precision mechanism. Trans Can Soc Mech Eng 39(3):419–429

    Article  Google Scholar 

Download references

Funding

The work was supported by the National Natural Science Foundation of China (No. 51775495), key projects of the National Natural Science Foundation of China (No. 91748204), and the Youth Funds of the State Key Laboratory of Fluid Power and Mechatronic Systems (Zhejiang University) (No. SKLoFP_QN_1802).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yunbo Bi.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Appendices

Appendix 1

Table 15 Simulation data of force-induced deformation at sampling poses obtained by Taguchi method

Appendix 2

Table 16 Simulation data of force-induced deformation at testing poses

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liu, J., Zhao, Z., Bi, Y. et al. Prediction and compensation of force-induced deformation for a dual-machine-based riveting system using FEM and neural network. Int J Adv Manuf Technol 103, 3853–3870 (2019). https://doi.org/10.1007/s00170-019-03826-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-019-03826-8

Keywords

Navigation