Skip to main content
Log in

Virtual bead representation and surface roughness evaluation challenges for additive manufacturing material extrusion processes

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Additive manufacturing (AM) processes, such as material extrusion, are part of a popular growing technology field; with limited human assistance required and advanced rapid prototyping capabilities, this technology is advertised to have limitless possibilities. The common challenge faced by users is a lack of design control of the surface roughness, which is highlighted by a characteristic “stair case” layering effect at the boundary. Focusing on material extrusion processes, the goal of this research is to model representative bead shapes, and highlight the surface roughness challenges for assessing boundary-fill regions. Various bead shapes are explored and compared through virtual simulation. Unique material extrusion AM-related issues arise, and it is shown that machining solutions may not provide the desired surface smoothness. This research illustrates that specific physical and virtual assessment tools and standards need to be further developed to convey surface roughness attributes for material extrusion additive manufactured components.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Urbanic RJ, Hedrick R, Saqib S, Nazemi N (2017) Material bead deposition with 2 + 2 ½ multi-axis machining process planning strategies with virtual verification for extruded geometry, Inter. J Adv Manuf Technol 95(9–12):3167–3184

    Google Scholar 

  2. Spinnie N, Smith DE (2016) Large scale fused deposition modeling: the effect of processing parameters on bead geometry, solid freeform fabrication 2016: proceedings of the 26th annual international solid freeform fabrication symposium

  3. Vorberger TV, Raja J (1990) Surface finish metrology tutorial, U.S. Department of Commerce, viewed 14 Jul. 16, url: http://www.nist.gov/calibrations/upload/89-4088.pdf

  4. ASME B46.1-2002 (2002) Surface texture (surface roughness, waviness, and lay), viewed Aug. 2, 16, url: http://files.asme.org/Catalog/Codes/PrintBook/17866.pdf

    Google Scholar 

  5. ISO 3274:1996 (1996) Surface texture: profile method - nominal characteristics of contact (stylus) instruments, url: http://www.iso.org/iso/iso_catalogue/catalogue_tc/catalogue_detail.htm?csnumber=1916

    Google Scholar 

  6. DIN EN ISO 4288:1998 (1998) GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996), standard by British Standard/European Standard/International Organization for Standardization.

    Google Scholar 

  7. Triantaphyllou A, Giusca CL, Macaulay GD, Roerig F, Hoebel M, Leach RK, Tomita B, Milne KA (2015) Surface texture measurement for additive manufacturing. Surf Topogr Metrol Prop 3(2):024002 (8 pp.)

    Article  Google Scholar 

  8. Sager B, Rosen DW (2008) Use of parameter estimation for stereolithography surface finish improvement. Rapid Prototyp J 14(4):213–220

    Article  Google Scholar 

  9. Onuh SO, Hon KKB (1998) Optimizing build parameters for improved surface finish in stereolithography. Int J Mach Tools Manuf 38(4):329–342

    Article  Google Scholar 

  10. Reeves P, Cobb R (1997) Reducing the surface deviation of stereolithography using in-process techniques. Rapid Prototyp J 3:20–31, 1997

    Article  Google Scholar 

  11. Cazo’n A, Morer P, Matey L (2014) PolyJet technology for product prototyping: tensile strength and surface roughness properties. Proc Inst Mech Eng B J Eng Manuf 228(12):1664–1675

    Article  Google Scholar 

  12. Paul BK, Voorakarnam V (2001) Effect of layer thickness and orientation angle on surface roughness in laminated object manufacturing. J Manuf Process 3:94–101

    Article  Google Scholar 

  13. Shi D, Gibson I (2000) Improving surface quality of selective laser sintered rapid prototype parts using robotic finishing. Proc Inst Mech Eng B J Eng Manuf 214(B3):197–203

    Article  Google Scholar 

  14. Pinkerton AJ, Li L (2003) The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish. Appl Surf Sci 208-209:411–416

    Article  Google Scholar 

  15. Sreedhar P, Manikandan CM, Jothi G (2012) Experimental investigation of surface roughness for fused deposition modeled part with different angular orientation. Int J Adv Des Manuf Technol 5(3):21–28

    Google Scholar 

  16. Urbanic RJ, Hedrick R (2009) Developing a virtual model for the fused deposition rapid prototyping process, Proceedings of the Life Cycle Engineering Conference: 131–137.

  17. Pandey PM, Reddy NV, Dhande SG (2003) Improvement of surface finish by staircase machining in fused deposition modeling. J Mater Process Technol 132:323–331

    Article  Google Scholar 

  18. Ahn D, Kweon H, Kwon S, Song J, Lee S (2009) Representation of surface roughness in fused deposition modeling. J Mater Process Technol 209:5593–5600

    Article  Google Scholar 

  19. Galantucci LM, Lavecchia F, Percoco G (2009) Experimental study aiming to enhance the surface finish of fused deposition modeled parts. CIRP Ann Manuf Technol 58(1):189–192

    Article  Google Scholar 

  20. Anitha R, Arunachalam S, Radhakrishnan P (2001) Critical parameters influencing the quality of prototypes in fused deposition modelling. J Mater Process Technol 118:385–388

    Article  Google Scholar 

  21. Perez C (2002) Analysis of the surface roughness and dimensional accuracy capability of fused deposition modelling processes. Int J Prod Res 40(12):2865–2881

    Article  Google Scholar 

  22. Ippolito R, Luliano L, Gatto A (1995) Benchmarking of rapid prototyping techniques in terms, of dimensional accuracy and surface finish. Ann CIRP 44(1):157–160

    Article  Google Scholar 

  23. Boschetto A, Giordano V, Veniali F (2012) Modelling micro geometrical profiles in fused deposition process. Int J Adv Manuf Technol 61:945–956

    Article  Google Scholar 

  24. Thrimurthulu K, Pandey PM, Reddy NV (2004) Optimum part deposition orientation in fused deposition modeling. Int J Mach Tool Manu 44(6):585–594

    Article  Google Scholar 

  25. Xu F, Loh HT, Wong YS (1999) Considerations and selection of optimal orientation for different rapid prototyping systems. Rapid Prototyp J 5(2):54–60

    Article  Google Scholar 

  26. Zhou MY, Xi JT, Yan JQ (2004) Adaptive direct slicing with non-uniform cusp heights for rapid prototyping. Int J Adv Manuf Technol 23(1–2):20–27

    Google Scholar 

  27. Byun H-S, Lee KH (2005) Determination of the optimal part orientation in layered manufacturing using a genetic algorithm. Int J Prod Res 43:2709–2724

    Article  MATH  Google Scholar 

  28. Mahapatra SS, Sood AK (2012) Bayesian regularization-based Levenberg-Marquardt neural model combined with BFOA for improving surface finish of FDM processed part. Int J Adv Manuf Technol 60(9–12):1223–1235

    Article  Google Scholar 

  29. Sood AK, Mahapatra SS, Ohdar RK (2011) Weighted principal component approach for improving surface finish of ABS plastic parts built through fused deposition modelling process. Int J Rapid Manuf 2(1–2):4–27

    Article  Google Scholar 

  30. Ghorpade A, Karunakaran KP, Tiwari MK (2007) Selection of optimal part orientation in fused deposition modelling using swarm intelligence. Proc Inst Mech Eng B J Eng Manuf 221(7):1209–1220

    Article  Google Scholar 

  31. Pandey PM, Reddy NV, Dhande SG (2006) Virtual hybrid-FDM system to enhance surface finish. Virtual Phys Prototyp 1(2):101–116

    Article  Google Scholar 

  32. Duty C, Kunc V, Compton B, Post B, Erdman D, Smith R, Lind R, Lloyd P, Love L (2017) Structure and mechanical behavior of big area additive manufacturing (BAAM) materials. Rapid Prototyp J 23(1):181–189. https://doi.org/10.1108/RPJ-12-2015-0183

    Article  Google Scholar 

  33. Eiliat H, Urbanic RJ (2018) Visualizing, analyzing, and managing voids in the material extrusion process, The Inter. J Adv Manuf Technol 96(9–12):4095–4109

    Article  Google Scholar 

  34. Urbanic RJ, Burford C, Hedrick R (2018) Virtual quality assessment tools for material extrusion processes. Comput-Aided Des Applic:1–12. https://doi.org/10.1080/16864360.2017.1419640

  35. Adams T, Grant C, Watson H (2012) A simple algorithm to relate measured surface roughness to equivalent sand-grain roughness, In Proceedings of the international conference on mechanical engineering and mechatronics, Ottawa, Ontario, Canada, 16-18 August 2012

  36. BAAM CI, Big area additive manufacturing, url: http://www.e-ci.com/baam/. Accessed 07 Feb 2019

  37. LSAM, Large scale additive manufacturing, url: http://www.thermwood.com/lsam_development_main.htm. Accessed 07 Feb 2019

  38. MAAM CI, Medium area additive manufacturing, url: http://www.e-ci.com/maam/. Accessed 07 Feb 2019

  39. Stratasys FDM Technology, url: FDM technology

Download references

Funding

The financial support from the Natural Science and Engineering Research Council (NSERC) of Canada through discovery research grants, and the University of Windsor Outstanding Scholars program are gratefully acknowledged.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to R. J. Urbanic.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Urbanic, R.J., DiCecco, L. Virtual bead representation and surface roughness evaluation challenges for additive manufacturing material extrusion processes. Int J Adv Manuf Technol 102, 2993–3009 (2019). https://doi.org/10.1007/s00170-019-03312-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-019-03312-1

Keywords

Navigation