Abstract
Transparent conducting films have been widely used in display devices such as flat panel displays, touchscreens, organic light-emitting diodes (OLEDs), and liquid-crystal displays. However, common techniques of patterning transparent conducting films, such as photolithography and laser patterning, are complex and require large investment. Therefore, research regarding fast and inexpensive patterning procedures for large area is still ongoing. In this study, a novel technique, which combines micro-electrical discharge machining (μ-EDM) with dynamic electrochemical etching, was applied to produce indium tin oxide (ITO) line patterns on glass substrates. Commercial tungsten (W) rods were used to fabricate microelectrodes by dynamic electrochemical etching and were subsequently used to create ITO line patterns by μ-EDM. A series of experiment was carried out to optimize the machining conditions such as gap voltage, cutting speed, and spindle speed. The criteria of this investigation were of the minimum difference between the tool diameter and the pattern width and the low waviness of the line edges. In addition, practical relations for each step were built to control machining process at high accuracy. By using these mathematical relations, the width of the resulting ITO line patterns can be predicted with an error of less than 4 %. Furthermore, the proposed technique proved that it can work well for long working distance.
Similar content being viewed by others
References
Farhan MS, Zalnezhad E, Bushroa AR, Sarhan AAD (2013) Electrical and optical properties of indium-tin oxide (ITO) films by ion-assisted deposition (IAD) at room temperature. Int J Precis Eng Manuf 14:1465–1469. doi:10.1007/s12541-013-0197-5
Tan NN, Hung DT, Anh VT, et al. (2015) Improved patterning of ITO coated with gold masking layer on glass substrate using nanosecond fiber laser and etching. Appl Surf Sci 336:163–169. doi:10.1016/j.apsusc.2014.10.122
Lin HK, Hsu WC (2014) Electrode patterning of ITO thin films by high repetition rate fiber laser. Appl Surf Sci 308:58–62. doi:10.1016/j.apsusc.2014.04.084
Cheng CW, Lin CY (2014) High precision patterning of ITO using femtosecond laser annealing process. Appl Surf Sci 314:215–220. doi:10.1016/j.apsusc.2014.06.174
Risch A, Hellmann R (2011) Picosecond laser patterning of ITO thin films. Phys Procedia 12:133–140. doi:10.1016/j.phpro.2011.03.115
Climent-Pascual E, García-Vélez M, Álvarez ÁL, et al. (2015) Large area graphene and graphene oxide patterning and nanographene fabrication by one-step lithography. Carbon N Y 90:110–121. doi:10.1016/j.carbon.2015.04.018
Hohnholz D, Schweikart K-H, Hanack M (1999) A simple method for the subdivision of ITO glass substrates. Adv Mater 11:646–649. doi:10.1002/(SICI)1521-4095(199906)11:8<646::AID-ADMA646>3.0.CO;2-6
Jiménez-Trillo J, Alvarez ALL, Coya C, et al. (2011) The use of arc-erosion as a patterning technique for transparent conductive materials. Thin Solid Films 520:1318–1322. doi:10.1016/j.tsf.2011.04.153
Benedict GF (1987) Nontraditional manufacturing processes. CRC Press, Boca Raton
Masuzawa T, Fujino M, Kobayashi K, et al. (1985) Wire electro-discharge grinding for micro-machining. CIRP Ann - Manuf Technol 34:431–434. doi:10.1016/S0007-8506(07)61805-8
Lim YM, Kim SH (2001) An electrochemical fabrication method for extremely thin cylindrical micropin. Int J Mach Tools Manuf 41:2287–2296. doi:10.1016/S0890-6955(00)00129-2
Fan ZW, Hourng LW, Wang CY (2010) Fabrication of tungsten microelectrodes using pulsed electrochemical machining. Precis Eng 34:489–496. doi:10.1016/j.precisioneng.2010.01.001
Chiou Y-C, Lee R-T, Chen T-J, Chiou J-M (2012) Fabrication of high aspect ratio micro-rod using a novel electrochemical micro-machining method. Precis Eng 36:193–202. doi:10.1016/j.precisioneng.2011.09.004
Mathew R, Sundaram MM (2012) Modeling and fabrication of micro tools by pulsed electrochemical machining. J Mater Process Technol 212:1567–1572. doi:10.1016/j.jmatprotec.2012.03.004
Duong T, Kim H (2015) Electrochemical etching technique for tungsten electrodes with controllable profiles for micro-electrical discharge machining. Int J Precis Eng Manuf 16:1053–1060. doi:10.1007/s12541-015-0136-8
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Trinh, X.L., Duong, T.H. & Kim, H.C. Large area controllable ITO patterning using micro-EDM and electrochemical etching. Int J Adv Manuf Technol 89, 3681–3689 (2017). https://doi.org/10.1007/s00170-016-9360-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9360-3