Skip to main content
Log in

Real-time laser tracker compensation of a 3-axis positioning system—dynamic accuracy characterization

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

The concept of integrating metrology systems into production processes has generated significant interest in industry due to its potential in reducing production time and defective parts. One of the most interesting methods of integrating metrology into production is the usage of external metrology systems to compensate machine tools and robots in real time. Continuing the work described in our previous paper of a prototype laser tracker-assisted 3-axis positioning system (Wang and Maropoulos Int J Adv Manuf Technol 69(1-4): 919-933, 2013), this paper describes experimental results of the dynamic path accuracy tests of the machine under real-time laser tracker compensation. Experiments show that the real-time corrections of the machine tool’s absolute volumetric error have significantly increased the dynamic path accuracy of the machine. This result is also validated by a ballbar acting as an independent measurement instrument, reducing the 95th percentile error from 60 μm to less than 10 μm, without any prior calibration or error mapping, showing that the proposed methods are feasible and can have very wide applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Wang Z, Maropoulos PG (2013) “Real-time error compensation of a three-axis machine tool using a laser tracker.”. Int J Adv Manuf Technol 69:1–4, p. 919–933 15 p

    Article  Google Scholar 

  2. Aguado S, Santolaria J, Samper D, Aguilar JJ (2014) “Study of self-calibration and multilateration in machine tool volumetric verification for laser tracker error reduction”, Proceedings of the Institution of Mechanical Engineers. Part B: J Eng Manuf 228(7):659–672

    Google Scholar 

  3. Zhang Z, Hu H (2014) “Measurement and compensation of geometric errors of three-axis machine tool by using laser tracker based on a sequential multilateration scheme”, Proceedings of the Institution of Mechanical Engineers. Part B: J Eng Manuf 228(8):819–831

    Google Scholar 

  4. J. Ni (1987). “Study on online identification and forecasting compensatory control of volumetric errors for multiple axis machine tools”, PhD Dissertation, University of Wisconsin-Madison

  5. Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools—a review. Part I: geometric, cutting-force induced and fixture-dependent errors. Int J Mach Tools Manuf 40:1235–1256

    Article  Google Scholar 

  6. Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools—a review. Part II: thermal errors. Int J Mach Tools Manuf 40:1257–1284

    Article  Google Scholar 

  7. Yang S, Yang J, Ni J (1996) The improvement of thermal error modelling and compensation on a turning centre. Int J Mach Tools Manuf 37(11):527–537

    Article  Google Scholar 

  8. Lo C-H, Yuan J, Ni J (1995) An application of real-time error compensation on a turning center. Int J Mach Tools Manuf 35(12):1669–1682

    Article  Google Scholar 

  9. Lei WT, Hsu YY (2003) Accuracy enhancement of five-axis CNC machines through real-time error compensation. Int J Mach Tools Manuf 43:871–877

    Article  Google Scholar 

  10. Yuan J, Ni J (1998) The real-time error compensation technique for CNC machining systems. Mechatronics 8:359–380

    Article  Google Scholar 

  11. Ruiz ARJ, Rosas JG, Granja FS, Honorato JCP, Taboada JJE, Serrano VM, Jimenez TM (2009) “A real-time tool positioning sensor for machine-tools.”. Sensors 9(10):7622–7647

    Article  Google Scholar 

  12. Renishaw (2013). “QC20-W wireless ballbar system description and specifications”, QC20-W wireless ballbar system technical brochure

  13. The Engineering and Physical Sciences Research Council (2012). “Details of grant: the light controlled factory.” Summary on Grant Application Form, Web. 16 Oct. 2014. http://gow.epsrc.ac.uk/NGBOViewGrant.aspx?GrantRef=EP/K018124/1

  14. ASME B89.4.19. (2006) “Performance evaluation of laser-based spherical coordinate measurement systems”

  15. Estler WT, Edmundson KL, Peggs GN and Parker DH, (2002) “Large scale metrology—an update”, CIRP Annals, NIST Technipubs

  16. FARO EUROPE GmbH & Co. KG. (2010) “Faro laser tracker ion”, Faro UK technical specification sheet

  17. A. B. Forbes, E. B. Hughes, and W. Sun, (2009) “A reference model for multi-station coordinate measuring systems”, Technical report, National Physical Laboratory, private communication

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zheng Wang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wang, Z., Maropoulos, P.G. Real-time laser tracker compensation of a 3-axis positioning system—dynamic accuracy characterization. Int J Adv Manuf Technol 84, 1413–1420 (2016). https://doi.org/10.1007/s00170-015-7820-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-7820-9

Keywords

Navigation