Skip to main content

Advertisement

SpringerLink
Log in

An energy-based surface flattening method for flat pattern development of sheet metal components

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Sheet metal parts are widely used in various industry branches. The flat pattern development of sheet metal components is a prerequisite for sheet metal fabrication. The conventional graphic solution or the analytical method carried out manually is laborious, time-consuming, and lacks accuracy. The feature-based flattening could help to achieve the objective of automatic pattern generation; however, it is only suitable for bend formable sheet metal components composed of flat and simple curved surface. Inspired by its wide applications in cloth and shoemaking industries, the energy-based flattening for mesh surface is then introduced into the flat pattern derivation of sheet metal parts in this paper. A simplified energy model is proposed as our physical model. An innovative energy relaxation process based on variable step size is introduced to promote efficiency. Some key issues like seed triangle selection and overlap correction are also concerned. For those complex surfaces, a hierarchy flattening methodology is proposed to release the flattened distortions. A comparison between the energy method and the classic as-rigid-as-possible mesh parameterization is made to show the effectiveness of our method. The numerical experimental results show that the energy-based flattening method is a practical, intelligent, and automatic approach for flat pattern generation of sheet metal components.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Chuang SH, Huang SF (1996) Feature decomposition from solid models for automatic flattening. Comput Aided Des 28(6–7):473–481

    Article  Google Scholar 

  2. Ye XG, Fuh JYH, Lee KS (2001) A hybrid method for recognition of undercut features from moulded parts. Comput Aided Des 33(14):1023–1034

    Article  Google Scholar 

  3. Gao S, Shah JJ (1998) Automatic recognition of interacting machining features based on minimal condition subgraph. Comput Aided Des 30(9):727–739

    Article  MATH  Google Scholar 

  4. Tyan LW, Devarajan V (1998) Automatic identification of non-intersecting machining features from 2D CAD input. Comput Aided Des 30(5):357–366

    Article  MATH  Google Scholar 

  5. Jagirdar R, Jain VK, Batra JL (2001) Characterization and identification of forming features for 3-D sheet metal components. Int J Mach Tools Manuf 41(9):1295–1322

    Article  Google Scholar 

  6. Ganesan R, Devarajan V (1998) Intersecting features extraction from 2D orthographic projections. Comput Aided Des 30(11):863–873

    Article  MATH  Google Scholar 

  7. Meeran S, Taib JM (1999) A generic approach to recognising isolated, nested and interacting features from 2D drawings. Comput Aided Des 31(14):891–910

    Article  MATH  Google Scholar 

  8. Shunmugam MS, Kannan TR (2002) Automatic flat pattern development of sheet metal components from orthographic projections. Int J Mach Tools Manuf 42(13):1415–1425

    Article  Google Scholar 

  9. Joshi S, Chang TC (1988) Graph-based heuristics for recognition of machined features from a 3D solid model. Comput Aided Des 20(2):58–66

    Article  MATH  Google Scholar 

  10. Choi JC, Kim BM, Kim C (1999) An automated progressive process planning and die design and working system for blanking or piercing and bending of a sheet metal product. Int J Adv Manuf Technol 15(7):485–497

    Article  Google Scholar 

  11. Rao YQ, Huang G, Li PG, Shao XY, Yu DY (2007) An integrated manufacturing information system for mass sheet metal cutting. Int J Adv Manuf Technol 33(5–6):436–448

    Article  Google Scholar 

  12. Toh KHS, Loh HT, Nee AYC, Lee KS (1995) A feature-based flat pattern development system for sheet metal parts. J Mater Process Technol 48(1–4):89–95

    Google Scholar 

  13. Prasad KSRK, Selvaraj P (2004) Practical methods of computer-aided flat pattern development for sheet metal components. Int J Prod Res 42(15):3011–3039

    Article  MATH  Google Scholar 

  14. Prasad KSRK, Selvaraj P (2005) On the considerations for the design of an automated aircraft sheet metal component production loft generation system. Int J Prod Res 43(14):3045–3067

    Article  MATH  Google Scholar 

  15. Selvaraj P, Radhakrishnan P, Adithan M (2009) An integrated approach to design for manufacturing and assembly based on reduction of product development time and cost. Int J Adv Manuf Technol 42(1–2):13–29

    Article  Google Scholar 

  16. Maillot J, Yahia H, Verroust A (1993) Interactive texture mapping. In: SIGGRAPH 93 Computer Graphics Proceeding, New York, USA, pp. 27–34

  17. McCartney J, Hinds BK, Seow BL (1999) The flattening of triangulated surfaces incorporating darts and gussets. Comput Aided Des 31(4):249–260

    Article  MATH  Google Scholar 

  18. McCartney J, Hinds BK, Seow BL, Gong D (2000) An energy based model for the flattening of woven fabrics. J Mater Process Technol 107(1–3):312–318

    Article  Google Scholar 

  19. McCartney J, Hinds BK, Chong KW (2005) Pattern flattening for orthotropic materials. Comput Aided Des 37(6):631–644

    Article  Google Scholar 

  20. Wang CCL, Smith SSF, Yuen MMF (2002) Surface flattening based on energy model. Comput Aided Des 34(11):823–833

    Article  Google Scholar 

  21. Wang CCL, Wang Y, Tang K, Yuen MMF (2004) Reduce the stretch in surface flattening by finding cutting paths to the surface boundary. Comput Aided Des 36(8):665–677

    Article  Google Scholar 

  22. Wang CCL, Tang K, Yuen MMF (2005) Freeform surface flattening based on fitting a woven mesh model. Comput Aided Des 37(8):799–814

    Article  Google Scholar 

  23. Li JT, Zhang DL, Lu GD, Peng YY, Wen X, Sakaguti Y (2005) Flattening triangulated surfaces using a mass-spring model. Int J Adv Manuf Technol 25(1–2):108–117

    Article  Google Scholar 

  24. Zhong YQ, Xu BG (2006) A physically based method for triangulated surface flattening. Comput Aided Des 38(10):1062–1073

    Article  Google Scholar 

  25. Chung WJ, Kim SH, Shin KH (2008) A method for planar development of 3D surfaces in shoe pattern design. J Mech Sci Technol 22(8):1510–1519

    Article  Google Scholar 

  26. Liang WW, Bin HZ (2004) Optimal flattening of freeform surfaces based on energy model. Int J Adv Manuf Technol 24(11–12):853–859

    Article  Google Scholar 

  27. Floater MS, Hormann K (2005) Surface parameterization: a tutorial and survey. In: Dodgson NA, Floater MS, Sabin MA (eds) Advances in multiresolution for geometric modelling. Springer, Heidelberg, pp 157–186

    Chapter  Google Scholar 

  28. Sheffer A, Praun E, Rose K (2006) Mesh parameterization methods and their applications. Found Trends Comput Graph Vis 2(2):105–171

    Article  Google Scholar 

  29. Liu LG, Zhang L, Xu Y, Gotsman C, Gortler SJ (2008) A local/global approach to mesh parameterization. Comput Graph Forum 27(5):1495–1504

    Article  Google Scholar 

  30. Batoz JL, Guo YQ, Mercier F (1998) The inverse approach with simple triangular shell elements for large strain predictions of sheet metal forming parts. Eng Comput 15(7):864–892

    Article  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. State Key Laboratory of Mechanical System and Vibration, Shanghai Jiaotong University, Shanghai, 200240, China

    Qiaosheng Liu, Juntong Xi & Zhuoqi Wu

  2. Major Laboratory of Network Manufacturing and Information Enterprise of Shanghai, Shanghai, 200030, China

    Juntong Xi

Authors
  1. Qiaosheng Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Juntong Xi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Zhuoqi Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Juntong Xi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Liu, Q., Xi, J. & Wu, Z. An energy-based surface flattening method for flat pattern development of sheet metal components. Int J Adv Manuf Technol 68, 1155–1166 (2013). https://doi.org/10.1007/s00170-013-4908-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-013-4908-y

Keywords

Search

Navigation