Abstract
Given the need for durable and low-maintenance products, thermal modification has emerged as an environmentally friendly alternative, replacing chemical treatments. Although the literature reports a large number of articles related to the wood thermal treatment, nevertheless there is a much smaller number related to the thermal treatment of Oriented Strand Board (OSB) panels, which are scarce, limited or contradictory. This panel is used as a building material for internal and covered exterior functions in roofs, walls, floors, structural elements and other uses, currently being widely studied. Therefore, this research aims to present a bibliometric and systematic literature review on heat treatment of OSB panels published between 2000 and 2020 in the Scopus database, through extensive bibliographic review and using a simple and integrative systematic, containing its metrics and main findings. It was found that, despite the progressive growth of interest from the scientific community in relation to wood modification, thermal-based modifications still have much less studies compared to other techniques. At the end, gaps, opportunities and potential areas for future research related to thermal modification of panels are presented.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Aro MD, Brashaw BK, Donahue PK (2014) Mechanical and physical properties of thermally modified plywood and oriented strand board panels. For Prod J 64:281–289
Ayrilmis N, Winandy JE (2009) Effects of Post Heat-Treatment on Surface Characteristics and Adhesive Bonding Performance of Medium Density Fiberboard Effects of Post Heat-Treatment on Surface Characteristics. Mater Manuf Process 24:594–599. https://doi.org/10.1080/10426910902748032
Barbirato G, Fiorelli J, Mejiaa J et al (2019) Quasi-static and dynamic response of oriented strand boards based on balsa wood waste. Compos Struct 219:83–89. https://doi.org/10.1016/j.compstruct.2019.03.062
Barbirato GHA, Junior WEL, Hellmeister V et al (2020) OSB Panels with Balsa Wood Waste and Castor Oil Polyurethane Resin. Waste Biomass Valoriz 11:743–751. https://doi.org/10.1007/s12649-018-0474-8
Bonigut J, Krug D, Stuckenberg P (2014) Dimensional stability and irreversible thickness swell of thermally treated oriented strandboards (OSB). Eur J Wood Prod 72:593–599. https://doi.org/10.1007/s00107-014-0820-x
BSI ES (2006) BS EN 300 - Oriented strand boards (OSB). Definitions, classification and specifications. Brussels
Buzo ALSC, Sugahara ES, Silva SA de M da, et al(2019) Pine and sugarcane bagasse particleboard using two adhesives for use in the construction industry. Ambient Construído 19:183–193. https://doi.org/10.1590/s1678-86212019000400350 (in Portuguese)
Cappellazzi J, Konkler MJ, Sinha A, Morrell JJ (2020) Potential for decay in mass timber elements: A review of the risks and identifying possible solutions. Wood Mater Sci Eng 15:351–360. https://doi.org/10.1080/17480272.2020.1720804
Cetera P, Negro F, Cremonini C et al (2018) Physico-mechanical properties of thermally treated poplar OSB. Forests 9(6):345. https://doi.org/10.3390/f9060345
Christiansen AW (1990) How overdrying wood reduces its bonding to phenol-formaldehyde adhesives: a critical review of the literature. Part 1: physical responses. Wood Fiber Sci 22:441–459
Del Menezzi CHS, de Souza RQ, Thompson RM et al (2008a) Properties after weathering and decay resistance of a thermally modified wood structural board. Int Biodeterior Biodegrad 62:448–454. https://doi.org/10.1016/j.ibiod.2007.11.010
Del Menezzi CHS, Ribeiro RB, Sternadt GH et al (2008b) Effect of thermal post-treatment on some surface-related properties of oriented Strandboards. Drv Ind 59:61–67
Del Menezzi CHS, Tomaselli I (2006) Contact thermal post-treatment of oriented strandboard to improve dimensional stability: A preliminary study. Holz Roh- Werkst 64:212–217. https://doi.org/10.1007/s00107-005-0052-1
Del Menezzi CHS, Tomaselli I, De Souza MR(2007) Non-destructive evaluation of thermally modified OSB: part 1- effect of the thermal treatment on the stress wave velocity.Sci For Sci67–75. https://doi.org/https://repositorio.unb.br/handle/10482/10464 (in Portuguese)
Del Menezzi CHS, Tomaselli I, Okino EYA et al (2009) Thermal modification of consolidated oriented strandboards: Effects on dimensional stability, mechanical properties, chemical composition and surface color. Eur J Wood Prod 67:383–396. https://doi.org/10.1007/s00107-009-0332-2
Direske M, Bonigut J, Wenderdel C et al (2018) Effects of MDI content on properties of thermally treated oriented strand board (OSB). Eur J Wood Prod 76:823–831. https://doi.org/10.1007/s00107-017-1256-x
Esteves B, Pereira H (2009) Wood modification by heat treatment: A review. BioResources 4:340–404. https://doi.org/10.15376/biores.4.1.370-404
Fiorelli J, Bueno SB, Cabral MR (2019) Assessment of multilayer particleboards produced with green coconut and sugarcane bagasse fibers. Constr Build Mater 205:1–9. https://doi.org/10.1016/j.conbuildmat.2019.02.024
Geldermann J, Kolbe LM, Krause A et al (2016) Improved resource efficiency and cascading utilisation of renewable materials. J Clean Prod 110:1–8. https://doi.org/10.1016/j.jclepro.2015.09.092
Gérardin P (2016) New alternatives for wood preservation based on thermal and chemical modification of wood — a review. Ann For Sci 73:559–570. https://doi.org/10.1007/s13595-015-0531-4
Gurleyen L, Ayata U, Esteves B et al (2019) Effects of thermal modification of oak wood upon selected properties of coating systems. BioResources 14:1838–1849. https://doi.org/10.15376/biores.14.1.1838-1849
Han G, Cheng W, Manning M, Eloy P (2012) Performance of zinc borate-treated oriented structural straw board against mold fungi, decay fungi, and termites – A preliminary trial. BioResources 7:2986–2995
Herzog T, Natterer J, Schweitzer R et al (2004) Timber Construction Manual. Birkhäuser, Berlin
Hill CAS (2006) Wood Modification: Chemical, Thermal and Other Processes, Wiley Seri. John Wiley & Sons Ltd, West Sussex
Icel B, Beram A (2017) Effects of industrial heat treatment on some physical and mechanical properties of iroko wood. Drv Ind 68:229–239. https://doi.org/10.5552/drind.2017.1720
Johansson D(2005) Strenght and Colour Response of Solid Wood to Heat Treatment. PhD Thesis (Department of Skellefteå Campus, Luleå University of Technology). 85 p
Kamdem DP, Pizzi A, Jermannaud A (2002) Durability of heat-treated wood. Holz Roh- Werkst 60:1–6. https://doi.org/10.1007/s00107-001-0261-1
Klímek P, Wimmer R, Meinlschmidt P, Kúdela J (2018) Utilizing Miscanthus stalks as raw material for particleboards. Ind Crops Prod 111:270–276. https://doi.org/10.1016/j.indcrop.2017.10.032
Lovrić A, Zdravković V, Popadić R, Milić G (2017) Properties of Plywood Boards Composed of Thermally Modified and Non-modified Poplar Veneer Aleksandar. BioResources 12:8581–8594. https://doi.org/10.15376/biores.12.4.8581-8594
LP Corp (2021) LP OSB APA STRUCTURAL (in Portuguese)
Melo D, de Q, Neto V, de de OS, Barros FC et al (2015) Chemical modifications of lignocellulosic materials and their application for removal of cations and anions from aqueous solutions. J Appl Polym Sci 133. https://doi.org/10.1002/app.43286
Mendes RF, Bortoletto Júnior G, de Almeida NF et al (2013a) Effects of thermal pre-treatment and variables of production on properties of OSB panels of pinus taeda. Maderas Cienc y Tecnol 15:141–152. https://doi.org/10.4067/S0718-221X2013005000012
Mendes RF, Bortoletto Júnior G, Garlet A et al (2013b) Decay fungi resistance in thermally treated OSB panels. Cerne 19:551–557. https://doi.org/10.1590/S0104-77602013000400004(in Portuguese)
Mendes RF, Júnior GB, De Almeida NF et al (2013c) Effect of thermal treatment on properties of OSB panels. Wood Sci Technol 47:243–256. https://doi.org/10.1007/s00226-012-0494-7
Navi P, Sandberg D (2011) Chap. 9: Heat treatment. THERMO-HYDRO- MECHANICAL PROCESSING OF WOOD. Taylor & Francis Group, Boca Raton, p 373
Okino EYA, Teixeira DE, Del Menezzi CHS (2007) Post-thermal treatment of oriented strandboard (OSB) made from Cypress (Cupressus glauca Lam.). Maderas Cienc y Tecnol 9:199–210. https://doi.org/10.4067/S0718-221X2007000300001
Paul W, Ohlmeyer M, Leithoff H et al (2006) Optimising the properties of OSB by a one-step heat pre-treatment process. Holz Roh- Werkst 64:227–234. https://doi.org/10.1007/s00107-005-0073-9
Paul W, Ohlmeyer M, Leithoff H (2007) Thermal modification of OSB-strands by a one-step heat pre-treatment - Influence of temperature on weight loss, hygroscopicity and improved fungal resistance. Holz Roh- Werkst 65:57–63. https://doi.org/10.1007/s00107-006-0146-4
Pipíška T, Pařil P, Čermák P et al (2020) Effect of chemical and thermal modification, and material replacement on strand board properties. Eur J Wood Prod 78:565–575. https://doi.org/10.1007/s00107-020-01527-8
Pozzer T, Gauss C, Ament Barbirato GH, Fiorelli J (2020) Trapezoidal core sandwich panel produced with sugarcane bagasse. Constr Build Mater 264:6. https://doi.org/10.1016/j.conbuildmat.2020.120718
Rowell RM (2006) Chemical modification of wood: A short review. Wood Mater Sci Eng 1:29–33. https://doi.org/10.1080/17480270600670923
Rowell RM(1983) Chemical Modification of Wood. In: Handbook of Wood Chemistry and Wood Composites. Madison
Rowell RM (1996) Chemical Modification of Nonwood Lignocelluiosics. Chemical Modification of Lignocellulosic Materials, 1st Editio. Routledge, p 17
Sandberg D, Kutnar A, Mantanis G (2017) Wood modification technologies - A review. IForest 10(6):895–908. https://doi.org/10.3832/ifor2380-010
Santos AM, de Souza L, de Costa F et al (2009) Effect of heat treatment on shear bond strength in OSB panels. Cienc Florest 19:31–40. https://doi.org/10.5902/19805098417(in Portuguese)
Shmulsky R, Jones PD (2011) Forest Products and Wood Science An Introduction, 6th edn. Wiley-Blackwell is, West Sussex
Silva JVF, de Campos CI, Ferreira BS, Silva MFF (2019) Production and characterization of heat treated osb made of pinus taeda. Acta Sci - Technol 41. https://doi.org/10.4025/actascitechnol.v41i1.39505
Sinha A, Gupta R, Nairn JA(2010) Effect of heat on the mechanical properties of wood and wood composites. In: 11th World Conference on Timber Engineering 2010, WCTE 2010. pp 661–668
Sugahara ES, da Silva SAM, Buzo ALSC et al (2019) High-density particleboard made from agro-industrial waste and different adhesives. BioResources 14:5162–5170. https://doi.org/10.15376/biores.14.3.5162-5170
Terzi E (2018) Thermal Degradation of Particleboards Incorporated with Colemanite and Common Boron-based Fire Retardants. BioResources 13:4239–4251. https://doi.org/10.15376/biores.13.2.4239-4251
Unsal O, Candan Z, Buyuksari U et al (2010) Effects of thermal modification on surface characteristics of osb panels. Wood Res 55:51–58
Wang J, Cao X, Liu H(2021) A review of the long–term efects of humidity on the mechanical properties of wood and wood–based products. Eur J Wood Prod 79:245–259. https://doi.org/s00107-021-01665-7
Wang Z, Xie W, Lu Y et al (2019) Dynamic and static testing methods for shear modulus of oriented strand board. Constr Build Mater 216:542–551. https://doi.org/10.1016/j.conbuildmat.2019.05.004
Wasim M, Ngo TD, Law D (2021) A state-of-the-art review on the durability of geopolymer concrete for sustainable structures and infrastructure. Constr Build Mater 291:21. https://doi.org/10.1016/j.conbuildmat.2021.123381
Acknowledgements
The research was carried out with the support of the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brazil (CAPES) - Financing Code 001.
Funding
The author(s) received no financial support for the research, authorship, and/or publication of this article.
Author information
Authors and Affiliations
Contributions
All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by Estefani Suana Sugahara, Felipe Nascimento Arroyo, Cristiane Inácio de Campos, Edson Cocchieri Botelho, André Luis Christoforo, Michelle Leali Costa and Francisco Antonio Rocco Lahr. The first draft of the manuscript was written by Estefani Suana Sugahara and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sugahara, E.S., Arroyo, F.N., de Campos, C.I. et al. Thermal treatment of OSB panels: a systematic and bibliometric overview. Eur. J. Wood Prod. 80, 1293–1307 (2022). https://doi.org/10.1007/s00107-022-01849-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-022-01849-9