Abstract
A stochastic model is proposed to study the behavior of structural sawn beams of Argentinean Eucalyptus grandis with the aim of improving the predictability of the elastic deformations. The enhancement of the mid-span deflection calculation is based on a probabilistic model of the Modulus of Elasticity (MOE) and the representation of its lengthwise variability through a random field. The standard model that uses a MOE variable assumed random from piece to piece but deterministic (constant) within each piece is obtained as a particular case. In order to obtain a statistical representation of the MOE, the Principle of Maximum Entropy (PME) is employed. Experimental data obtained from bending tests are employed to find the parameters of the derived Probability Density Function (PDF). The PDF of the mid-span deformations is numerically obtained through the Stochastic Finite Element Method (SFEM) and Monte Carlo Simulations (MCS). Numerical results are validated with experimental values. Deflections of structural sized beams under usual loads are obtained. Finally, the stochastic model is used to compare with the serviceability requirements established in the Argentinean design code. It is shown that the structural performance of timber beams is found through a more realistic material approach.
Similar content being viewed by others
References
ASTM D 198 (2002) Standard test methods of static tests of lumber in structural sizes. American Society for Testing and Materials (ASTM), West Conshohocken, United States
Bathe KJ (1982) Finite element procedures in engineering analysis. Prentice-Hall, New Jersey
Benjamin RJ, Cornell CA (1970) Probability, statistics and decision for civil engineers. McGraw-Hill, New York
Brandner R (2012) Stochastic system actions and effects in engineered timber products and structures. PhD thesis, Graz University of Technology
Brandner R, Schickhofer G (2015) Probabilistic models for the modulus of elasticity and shear in serial and parallel acting timber elements. Wood Sci Technol 49(1):121–146
CIRSOC 601 (2013) Argentinean standard of timber structures (In Spanish). Instituto Nacional de Tecnología Industrial (INTI)- Centro de Investigación de los Reglamentos Nacionales de Seguridad para las Obras Civiles (CIRSOC), Buenos Aires
Czmoch I (1998) Influence of structural timber variability on reliability and damage tolerance of timber beams. PhD thesis, Luleå Tekniska Universitet, Luleå
Der Kiureghian A, Ke JB (1988) The stochastic finite element method in structural reliability. Probab Eng Mech 3(2):83–91
Der Kiureghian A, Liu PL (1986) Structural reliability under incomplete probability information. J Eng Mech-ASCE 112:85–104
Ditlevsen O, Källsner B (2005) Span-dependent distributions of the bending strength of spruce timber. J Eng Mech-ASCE 131(5):485–499
EN 338 (2009) Structural timber. Strength classes; German version. European Committee for Standardization (CEN). DIN Deutsches Institut fr Normung e. V., Berlin
EN 384 (1996) Structural timber. Determination of characteristic values of mechanical properties and density (in Spanish). AENOR-Asociación Española de Normalización y Certificación, Madrid
EN 408 (1996) Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties (in Spanish). AENOR-Asociación Española de Normalización y Certificación, Madrid
Fink G, Köhler J (2014) Model for the prediction of the tensile strength and tensile stiffness of knot clusters within structural timber. Eur J Wood Prod 72(3):331–341
García D, Sampaio R, Rosales M (2016) Eigenproblems in timber structural elements with uncertain properties. Wood Sci Technol. doi:10.1007/s00226-016-0810-8
Ghanem RG, Spanos PD (1991) Stochastic finite elements: a spectral approach. Springer, New York
IRAM 9662-2 (2006) Glued laminated timber. Visual strength grading of boards, part 2: boards of Eucalyptus grandis (in Spanish). Argentinean Institute for Standardization and Certification (IRAM), Buenos Aires
Isaksson T (1999) Modeling the variability of bending strength in structural timber: length and load configuration effects. PhD thesis, Lund Institute of Technology, Lund
Jaynes E (1957) Information theory and statistical mechanics. Phys Rev 106(4):620–630
Kandler G, Füssl J, Eberhardsteiner J (2015a) Stochastic finite element approaches for wood-based products: theoretical framework and review of methods. Wood Sci Technol 49(5):1055–1097
Kandler G, Füssl J, Serrano E, Eberhardsteiner J (2015b) Effective stiffness prediction of glt beams based on stiffness distributions of individual lamellas. Wood Sci Technol 49(6):1101–1121
Kline DE, Woeste FE, Bendtsen B (1986) Stochastic model for modulus of elasticity of lumber. Wood Fiber Sci 18(2):228–238
Köhler J (2007) Reliability of timber structures. PhD thesis, Swiss Federal Institute of Technology, Zürich
Köhler J, Sørensen JD, Faber MH (2007) Probabilistic modeling of timber structures. Struct Saf 29(4):255–267
Lam F, Varoğlu E (1991) Variation of tensile strength along the length of lumber. Part 2: Model development and verification. Wood Sci Technol 25(6):449–458
Melchers RE (1999) Structural reliability: analysis and prediction. Wiley, New York
Mulani S (2006) Uncertainty quantification in dynamic problems with large uncertainties. PhD thesis, Virginia Polytechnic Institute and State University, Blacksburg
NDS (2005) National Design Specification for Wood Construction. American Forest & Paper Association (AF&PA)—American Wood Council (AWC)
Piter J (2003) Strength grading of sawn timber as structural material: development of a method for the Argentinean Eucalyptus grandis (in Spanish). PhD thesis, Universidad Nacional de la Plata, La Plata
Piter J, Zerbino R, Blaß H (2003) Relationship between global and local modulus of elasticity in beams of argentinean eucalyptus grandis. Maderas Ciencia y Tecnología 5(2):107–116
Piter J, Zerbino R, Blaß H (2004a) Visual strength grading of Argentinean Eucalyptus grandis. Holz Roh Werkst 62(1):1–8
Piter J, Zerbino R, Blaß H (2004b) Machine strength grading of argentinean eucalyptus grandis: main grading parameters and analysis of strength profiles according to european standards. Holz Roh Werkst 62(1):9–15
Porteous J, Kermani A (2007) Structural timber design to Eurocode 5. Wiley
SBN 1980 (1981) Swedish Building Code (in Swedish). National Swedish Board of Physical Planning and Building, Stockholm
Shannon C (1948) A mathematical theory of communication. Bell Sys Technol J 27:379–423
Sudret B, Der Kiureghian A (2000) Stochastic finite element methods and reliability: a state-of-the-art report. Department of Civil and Environmental Engineering, University of California
Wang Y, Foschi R (1992) Random field stiffness properties and reliability of laminated wood beams. Struct Saf 11(3–4):191–202
Acknowledgements
This study was partially supported by CONICET and SGCyT-UNS. The experimental data provided by J. C. Piter and co-workers from FRCU-UTN (Argentina) is greatly acknowledged by the authors.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
García, D.A., Rosales, M.B. Deflections in sawn timber beams with stochastic properties. Eur. J. Wood Prod. 75, 683–699 (2017). https://doi.org/10.1007/s00107-016-1124-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-016-1124-0