Skip to main content
SpringerLink
Log in

All-Grounded Passive Elements Voltage-Mode DVCC-Based Universal Filters

  • Published:
Circuits, Systems and Signal Processing Aims and scope Submit manuscript

Abstract

In this paper two new voltage-mode (VM) universal filters employing three plus-type differential voltage current conveyors (DVCC+s) and grounded passive elements are presented. The first proposed filter is a single-input five-output (SIFO) circuit which can realize simultaneously all of the standard responses, i.e. low-pass (LP), band-pass (BP), high-pass (HP), all-pass (AP) and notch (NH) from the same configuration. The second proposed circuit is a three-input single-output (TISO) universal filter for realizing standard responses depending on the selection of the input signal from the same topology. Both of the proposed filters have the advantage of a high input impedance, which enables easy cascading to obtain higher order filters. The proposed filters are simulated using the SPICE program to verify the theoretical analysis.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. E. Altuntas, A. Toker, Realization of voltage and current mode KHN biquads using CCCIIs. Int. J. Electron. Commun. 56, 45–49 (2002)

    Article  Google Scholar 

  2. C.M. Chang, Multifunction biquadratic filters using current conveyors. IEEE Trans. Circuits Syst. II, Analog Dig. Signal Process. 44(11), 956–958 (1997)

    Article  Google Scholar 

  3. C.M. Chang, H.P. Chen, Universal capacitor-grounded voltage-mode filter with three inputs and a single output. Int. J. Electron. 90, 401–406 (2003)

    Article  Google Scholar 

  4. H.P. Chen, Universal voltage-mode filter using only plus-type DDCCs. Analog Integr. Circuits Signal Process. 50, 137–139 (2007)

    Article  Google Scholar 

  5. H.P. Chen, S.S. Shen, A versatile universal capacitor-grounded voltage-mode filter using DVCCs. Etri J. 29, 470–476 (2007)

    Article  Google Scholar 

  6. H.P. Chen, K.H. Wu, Voltage-mode DDCC-based multifunction filters. J. Circuits, Syst. Comput. 16, 93–104 (2007)

    Article  Google Scholar 

  7. W.Y. Chiu, J.W. Horng, High-input and low-output impedance voltage-mode universal biquadratic filter using DDCCs. IEEE Trans. Circuits Syst. II, Express Briefs 54, 649–652 (2007)

    Article  Google Scholar 

  8. W. Chiu, S.I. Liu, H.W. Tsao, J.J. Chen, CMOS differential difference current conveyors and their applications. IEE Proc. Circuits Dev. Syst. 143, 91–96 (1996)

    Article  MATH  Google Scholar 

  9. H.O. Elwan, A.M. Soliman, Novel CMOS differential voltage current conveyor and its applications. IEE Proc. Circuits Dev. Syst. 144, 195–200 (1997)

    Article  Google Scholar 

  10. M. Higashimura, Y. Fukui, Universal filter using plus-type CCIIs. Electron. Lett. 32, 810–811 (1996)

    Article  Google Scholar 

  11. J.W. Horng, W.Y. Chiu, H.Y. Wei, Voltage-mode highpass, bandpass and lowpass filters using two DDCCs. Int. J. Electron. 91, 461–464 (2004)

    Article  Google Scholar 

  12. J.W. Horng, C.H. Hou, C.M. Chang, H.P. Chou, C.T. Lin, High input impedance voltage-mode universal biquadratic filter with one input and five outputs using current conveyors. Circuits Syst. Signal Process. 25, 767–777 (2006)

    Article  MATH  MathSciNet  Google Scholar 

  13. J.W. Horng, J.R. Lay, C.W. Chang, M.H. Lee, High input impedance voltage-mode multifunction filters using plus-type CCIIs. Electron. Lett. 33, 472–473 (1997)

    Article  Google Scholar 

  14. S. Minaei, M.A. Ibrahim, A mixed-mode KHN-biquad using DVCC and grounded passive elements suitable for direct cascading. Int. J. Circuit Theory Appl. 37(7), 793–810 (2009)

    Article  Google Scholar 

  15. R. Senani, S.S. Gupta, Universal voltage-mode/current-mode biquad filter realised with current feedback op-amps. Frequenz 51(78), 203–208 (1997)

    Google Scholar 

  16. R. Senani, V.K. Singh, KHN-equivalent biquad using current conveyors. Electron. Lett. 31, 626–628 (1995)

    Article  Google Scholar 

  17. A.M. Soliman, Kerwin–Huelsman–Newcomb circuit using current conveyors. Electron. Lett. 30, 2019–2020 (1994)

    Article  Google Scholar 

  18. Y. Sun, Design of High Frequency Integrated Analogue Filters. The Institute of Electrical Engineering, London (2002)

    Google Scholar 

  19. Z. Wang, 2-MOSFET transresistor with extremely low distortion for output reaching supply voltages. Electron. Lett. 26, 951–952 (1990)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Electronics and Communications Engineering, Dogus University, Acibadem, Kadikoy, 34722, Istanbul, Turkey

    Shahram Minaei

  2. Department of Electrical and Electronics Engineering, Pamukkale University, 20070, Kinikli-Denizli, Turkey

    Erkan Yuce

Authors
  1. Shahram Minaei
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Erkan Yuce
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Shahram Minaei.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Minaei, S., Yuce, E. All-Grounded Passive Elements Voltage-Mode DVCC-Based Universal Filters. Circuits Syst Signal Process 29, 295–309 (2010). https://doi.org/10.1007/s00034-009-9136-1

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00034-009-9136-1

Search

Navigation