References
E. S. Davenport and E. C. Bain:Tram. AIME, 1930, vol.90, p.117.
Physical Properties ofMartensite and Bainite, Special Report 93, p. 211, The Iron and Steel Institute, 1965.
Transformation andHardenability in Steel, p. 212, Climax Molybdenum Company of Michigan, Symposium, 1967.
Decomposition of Austenite by Diffusional Processes, Interscience, 1962.
H. I. Aaronson:The Mechanism of Phase Transformation in Crystalline Solids, vol.33, p.270, Institute of Metals Monograph Report, 1969.
J. M. Oblak, R. H. Goodenow, and R. F. Hehemann:Trans. TMS-AIME, 1964, vol. 230, p. 258.
R. H. Goodenow, S. J. Matas, and R. F. Hehemann:Trans. TMS-AIME, 1963, vol. 227, p. 651.
R. F. Hehemann,K. R. Kinsman, and H. I. Aaronson:Met. Trans., 1972, vol. 3, p.1077.
R. Honeycombe and F. Pickering:Met. Trans., 1972, vol.3, p. 1099.
G. R. Srinivasan and C. M. Wayman:ActaMet., 1968, vol. 16, p.621.
R. F. Hehemann:Phase Transformations, p. 409, ASM, 1970.
The Making, Shaping, and Treating of Steel, p. 1133, U.S. Steel Co., Pittsburgh, Pa., 1971.
B. G. Reisdorf:Trans. TMS-AIME, 1963, vol.227, p. 1334.
G. S. Ansell and E. M. Breinan:Trans. ASM, 1965, vol.58, p.110.
J. K. Stanley:Electrical and Magnetic Properties of Metals, ASM,Metals Park,Ohio,1963.
G. R. Speich:Trans. TMS-AIME, 1969, vol.245, p.2533.
C. S. Roberts,B. L. Averbach, and M. Cohen:Trans. ASM, 1953, vol.45, p. 576.
P. H. Zajchowski: M.S. Thesis, Department Materials Science and Engineering, University of California,Berkeley,Calif., August,1974.
G. Kurdjumov and L. Lyssak:J. Iron Steel Inst., 1947, vol.156, p.29.
S. Fletcher and M. Cohen:Trans. ASM, 1944, vol.32, p.333.
B. L. Averbach and M. Cohen:Trans. ASM, 1949, vol.41, p.1024.
C. S. Roberts,B. L. Averbach, and M. Cohen:Trans. ASM, 1953, vol.45, p.576.
M. Mentser:Trans. ASM, 1959, vol.51, p.517.
J. Crangle and W. Sucksmith:J. Iron Steel Inst., 1951, vol. 163, p. 141.
F. E. Werner,B. L. Averbach, and M. Cohen:Trans. ASM, 1957, vol.49, p.823.
K. H. Jack:J. Iron Steel Inst., 1951, vol.169, p.26.
H. W. King and S. G. Glover:J. Iron Steel Inst., 1959, vol.193, p.123.
B. S. Lenient,B. L. Averbach, and M. Cohen:Trans. ASM, 1954, vol. 46, p. 851.
D. M. Teague and S. T. Ross:Proc. ASTM, 1955, vol.55, p.590.
P. M. Kelly and J. Nutting:J Iron Steel Inst., 1961, vol.197, p.199.
A. M. Turkalo:Trans. ASM, 1961, vol.54, p.344.
A. E. Austin and C. M. Schwartz:Proc. ASTM, 1952, vol.52, p. 592.
F. G. Wilson and W. S. Owen:J. Iron Steel Inst., June, 1965, p. 590.
A. M. Llopis:t Ph.D. Thesis, Department of Materials Science and Engineering, University of California, Berkeley, June 1977.
P. Vasudevan,L. W. Graham, and H. J. Aron:J. Iron Steel Inst., 1958, vol.190, p.386.
S.V. Radcliffe and E. C. Rollason:J. Iron Steel Inst., 1959, vol.191, p.56.
J. S. White and W.S. Owen:J. Iron Steel Inst., 1960, vol.195, p.79.
A. E. Austin and C. M. Schwartz:Proc. ASTM, 1952, vol.52, p.592.
R. H. Goodenow,S. J. Matas, and R. F. Hehemann:Trans. TMS-AIME, 1963. vol.227, p.651.
T. Ko and S. A. Cottrell:J. Iron Steel Inst., 1952, vol.172, p.307.
G.R. Speich and M. Cohen:Trans. TMS-AIME, 1960, vol.218, p.1050.
R. H. Goodenow, R. H. Barkalow, and R. F. Hehemann: Special Report 93, p. 135, The Iron and Steel Institute, 1965.
F. P. Pickering: Symposium by Climax Molybdenum Co. and University of Michigan, p. 109, 1967.
Atlas ofIsothermal Transformation Diagrams, U.S. Steel Co., 1951.
Phase Transformation Kinetics and Hardenability of Medium-Carbon Alloy Steels, Climax Molybdenum Co., 1972.
B. N. P. Babu,M. S. Bhat,E. R. Parker, and V. F. Zackay:Met. Trans. A, 1976, vol.7A, p.17.
P. Vasudevan,L. W. Graham, and H. J. Axon:J. Iron Steel Inst., 1958, vol.190, p.386.
S. V. Radcliffe and E. C. Rollason:J Iron Steel Inst., 1959, vol.191, p.56.
S. J. Matas and R. F. Hehemann:Trans. TMS-AIME, 1961, vol.221, p.179.
A. Schrader and F. Wever:Arch. Eisenhuettenw., 1952, vol. 23, p. 489.
H. Modin and S. Modin:Abst. Rev. Met., 1956, vol.III, p.173.
K. Tsuya:J. Mech. Lab., Japan, 1956, vol.2, p.20.
G. R. Speich:Decomposition of Austenite by DiffusionalProcesses, p. 353, Met. Soc, AIME, 1960.
J. M. Oblak,R. H. Goodenow, and R. F. Hehemann:Trans. TMS-AIME, 1964 vol.230, p.258.
P. M. Kelly and J. Nutting:J. Iron Steel Inst., 1961, vol.197, p.199.
D. N. Shackleton and P. M. Kelly: Special Report 93, p. 126, Iron and Steel Institute, 1965.
J. M. Oblak and R. F. Hehemann:Transformation and Hardenability in Steel: p.15,Climax Molybdenum Co. of Michigan, 1967.
H. I. Aaronson:Decomposition of Austenite by Diffusional Processes, p.387. V. F. Zackay and H. 1. Aaronson,eds.,Interscience, New York,N.Y.,1962.
R. F. Hehemann and A. R. Troiano:Trans. AIME, 1954, vol.200, p.1272.
K. J. Irvine and F. B. Pickering:Physical Properties ofMartensite and Bainite Special Report 93, p. 110, Iron and Steel Institute, 1965.
G. Thomas:Iron and Steel International (England), October, 1973, p. 459.
W. S. Owen:Trans. ASM, 1954, vol. 46, p. 824.
R. B. Banerjee:J. Iron Steel Inst., February, 1965, p. 166.
Der-Hung and G. Thomas:Trans. ASM, 1969, vol. 62, p. 659.
R. D. Goolsby, W. E. Wood, E. R. Parker, and V. F. Zackay:Electron Mi-croscopy and Structure of Materials, p. 798, University of California Press, Berkeley, Calif., 1972.
E. B. Kula and A. A. Ancil:J. Mater., JMLSA, December, 1969, vol. 4, no. 4, p. 817.
L. J. Klingler, W. J. Barnett, R. P. Frohmberg, and A. R. Troiano:Trans. ASA, 1954, vol. 46, p. 1557.
ASTM Standards, E399-74, Philadelphia, Pa., 1974.
T. Tom: Ph.D. Thesis, Department Materials Science and Engineering, Uni-versity of California, Berkeley, Calif., September, 1973.
G. Y. Lai, W. E. Wood, R. A. Clark, V. F. Zackay, and E. R. Parker:Met. Trans., 1974, vol. 5, p. 1663.
D. Dulieu:Proc. Third International Conference on the Strength of Metals an Alloys, Institute of Metals and Iron and Steel Institute, Cambridge, England, vol. 2, p. 383, August, 1973.
R. O. Ritchie, B. Francis, and W. L. Server:Met. Trans. A, 1976, vol. 7A, p. 831.
T. R. Wilshaw, C. A. Rau, and A. S. Tetleman:Eng. Fract. Mech., 1968, vol. 1, p. 191.
J. Malkin and A. S. Tetleman:Eng. Fract. Mech., 1971, vol. 3, p. 151.
P. T. Heald, G. M. Spink, and P. J. Worthington:Mater. Sci. Eng., 1972. vol. 10, p. 129.
G. Kohn: Ph.D. Thesis, Department of Materials Science and Engineering, University of California, Berkeley Calif., November, 1976.
S. K. Das and G. Thomas:Trans. ASM, 1969, vol. 62, p. 659.
G. Thomas and S. K. Das:J. Iron Steel Institute, 1971, vol. 209, p. 801.
D. Webster:Trans. ASM, 1968, vol. 61. p. 816.
S. Jin, D. Huang, and J.W. Morris, Jr.:Met. Trans. A, 1976, vol. 7A, p. 637.
C. A. Pampillo and H. W. Paxton:Met. Trans., 1972, vol. 3, p. 2895.
D. Bhandarkar, V. F. Zackay, and E. R. Parker:Met. Trans., 1972, vol. 3, p. 2619.
D. Fahr:Met. Trans., 1971, vol. 2, p. 1883.
W. W. Gerberich, P. L. Hemmings, and V. F. Zackay:Met. Trans., 1971, vol. 2, p. 2243.
M. F. Carlson, B. V. N. Rao, R. O. Ritchie, and G. Thomas:Lawrence Berkeley Laboratory Report 5111, Berkeley, Calif., April, 1976.
P. C. Paris and F. Erdogan:J. Basic Eng, 1963, vol. 85, p. 528.
R. M. N. Pelloux:Eng. Fract. Mech., April, 1970, vol. 1, no. 4, p. 697.
C. E. Richards and T. C. Lindley:Eng. Fract. Mech., December, 1972, vol. 4, no. 4, p. 951.
P. C. Paris, R. J. Bucci, E. T. Wessel, W. G. Clark, and T. R. Mager: ASTM STP 513, p. 141, ASTM, 1972.
R. A. Schmidt and P. C. Paris:Progress in Flow Growth and Fracture Tough-ness Testing, ASTM STP 536, p. 79, ASTM, 1973.
J. L. Robinson, P. E. Irving, and C. J. Beevers:Proc. Third International Congress on Fracture, vol. V, paper V-343, Munich, W. Germany, Verein Deutscher Eisenhuettenleute, Dusseldorft, April, 1973.
R. O. Ritchie and J. F. Knott:Acta Met., 1973, vol. 21, no. 5, p. 639.
R. O. Ritchie and J. F. Knott:Mater. Sci. and Eng., April, 1974, vol. 14, no. 1, p.7.
R. J. Cooke, P. E. Irving, G. S. Booth, and C. J. Beevers:Eng. Fract. Mech., March, 1975, vol. 7, no. 1, p. 69.
R. O. Ritchie:Proc. Fourth International Conference on Fracture, Waterloo, Canada, June, 1977 (Report No. LBL-5188, Lawrence Berkeley Lab., University of California, Berkeley, Calif., June, 1976).
C. E. Richards and T. C. Lindley:Eng. Fract. Meek, 1972, vol. 4, p. 951.
R. O. Ritchie and J. F. Knott:Acta Met., 1973, vol. 21, p. 639.
R. O. Ritchie and J. F. Knott:Mater. Sci. Eng., 1974, vol. 14, p. 7.
H. Kitagawa, H. Nishitani, and J. Matsumoto:Proc. Third International Congress on Fracture, paper V-444JA, Munich, 1973.
J. L. Robinson and C. J. Beevers:Metal Sci.J., 1973, vol. 7, p. 153.
P. E. Irving and C. J. Beevers:Met. Trans., 1974, vol. 5, p. 391.
J. Masounave and J-P. Bailon:Scr. Met., 1976, vol. 10, p. 165.
R. O. Ritchie:J. Eng. Mater. Technol, vol. 99, p. 193.
M. Klesnil and P. Lukas:Mater. Sci. Eng., 1972, vol. 9, p. 231.
L. P. Pook:ASTM STP 513, p. 106, 1972.
R. J. Bucci, P. C. Paris, R. W. Hertzberg, R. A. Schmidt, and A. F. Anderson:ASTM STP 513, p. 125, 1972.
P. C. Paris, R. J. Bucci, E. T. Wessel, W. G. Clark, and T. R. Mager:ASTM STP 513, p. 141, 1972.
R. J. Bucci, W.G.Clark, and P. C.Paris:ASTM STP 513, p. 177, 1972.
A. J. McEvily and J. Groeger:Proc. Fourth International Conference on Fracture, Waterloo, Canada, June, 1977.
R. O. Ritchie:Proc. Fourth International Conference on Fracture, Waterloo, Canada, June, 1977 (University of California LBL Report No. 5188, June, 1976).
R. O. Ritchie:Met. Trans. A, 1977, vol. 8A, p. 1131.
M. Klesnil and P. Lukas:Eng. Fract. Mech., 1972. vol. 4, p. 77.
J. A. Feeney, J. C. McMillan, and R. P. Wei:Met. Trans., 1970, vol. 1, p. 1741.
R. J. Cooke, P. E. Irving, G. S. Booth, and C. J. Beevers:Eng. Fract. Mech., 1975, vol. 7, p. 69.
R. O. Ritchie:Metal Science, vol. 11, 1977, no. 8J9,The Metals Society Conference FATIGUE 1977, Cambridge, United Kingdom, March, 1977.
R. O. Ritchie: submitted toJEng. Mater. Technol., Trans. ASME, Series [H], 1977. University of California, LBL Report No. 5496, Oct., 1976.
D. Webster: AFC, Boeing Document D6-23973, The Boeing Co., Seattle, Wash., June, 1969.
H. H. Uhlig:Corrosion and Corrosion Control, 2nd ed., John Wiley and Sons, New York, N.Y., 1971.
R. A. Oriani and P. H. Jospehic:Acta Met., 1974, vol. 22, p. 1065.
Y. Katz:Third International Congress on Fracture, Munich, West Germany, Verein Deutscher Eisenhuettenleute, Dusseldorf, vol. V, April, 1973.
M. H. Castro-Cedeno: M.S. Thesis, Department of Materials Science and Engineering, University of California, Berkeley, Calif., February, 1977.
J. H. Shively, R. F. Hehemann, and A. R. Troiano:Corrosion, 1966, vol. 22, p. 253.
Rights and permissions
About this article
Cite this article
Parker, E.R. Interrelations of compositions, transformation kinetics, morphology, and mechanical properties of alloy steels. Metall Trans A 8, 1025–1042 (1977). https://doi.org/10.1007/BF02667387
Issue Date:
DOI: https://doi.org/10.1007/BF02667387