Abstract
Bearing is the key component of rotating machinery, so the rapid and accurate fault diagnosis of bearing is of great significance. As one of the most commonly used diagnostic ways, vibration analysis has been explored by many scholars. However, vibration signals are underutilized in most studies and the fault information is not sufficiently extracted, which will lead to the failure of achieving expected diagnostic accuracy. This paper proposes a multilevel feature fusion of multi-domain vibration signals method for bearing fault diagnosis. Vibration signals are converted into time domain, frequency domain and time–frequency domain for fault diagnosis to realize the full use of vibration signals. The bilinear model and multi-head attention are applied to the fine-grained fusion of features extracted from multi-domain vibration signals. Experiments are conducted on Paderborn bearing data set to verify the effectiveness of proposed method. Results show that the accuracy of proposed method is greatly improved, which is much higher than the other methods.
Similar content being viewed by others
Data availability
Not applicable.
References
Wang, Z., Zhang, Q., Xiong, J., Xiao, M., Sun, G., He, J.: Fault diagnosis of a rolling bearing using wavelet packet denoising and random forests. IEEE Sens. J. 17(17), 5581–5588 (2017)
Liu, Z., Jiang, L., Wei, H., Chen, L., Li, X.: Optimal transport-based deep domain adaptation approach for fault diagnosis of rotating machine. IEEE Trans. Instrum. Meas. 70, 1–12 (2021)
Cao, L., Shen, Y., Shan, T., Xia, Y., Wang, J., & Lin, Z.: Bearing fault diagnosis method based on GMM and coupled hidden Markov model. In: 2018 Prognostics and System Health Management Conference (PHM-Chongqing), pp. 932–936, IEEE (2018)
Zhang, X., and Kang, J.: Hidden Markov models in bearing fault diagnosis and prognosis. In: 2010 Second International Conference on Computational Intelligence and Natural Computing, IEEE (2010)
Wang, D., Li, Y., Jia, L., Song, Y., Liu, Y.: Novel three-stage feature fusion method of multimodal data for bearing sault diagnosis. IEEE Trans. Instrum. Meas. 70, 1–10 (2021)
Hassani, H., Zarei, J., Arefi, M.M., Razavi-Far, R.: zSlices-based general type-2 fuzzy fusion of support vector machines with application to bearing fault detection. IEEE Trans. Ind. Electron. 64(9), 7210–7217 (2017)
Muralidharan, V., Sugumaran, V.: Feature extraction using wavelets and classifification through decision tree algorithm for fault diagnosis of mono-block centrifugal pump. Measurement 46(1), 353–359 (2013)
Gunerkar, R.S., Jalan, A.K., Belgamwar, S.U.: Fault diagnosis of rolling element bearing based on artificial neural network. J. Mech. Sci. Technol. 33(2), 505–511 (2018)
Roy, S.S., Dey, S., Chatterjee, S.: Autocorrelation aided random forest classifier-based bearing fault detection framework. IEEE Sens. J. 20(18), 10792–10800 (2020)
Guo, Z., Liu, M., Wang, Y., Qin, H.: A new fault diagnosis classifier for rolling bearing united multi-scale permutation entropy optimize VMD and cuckoo search SVM. IEEE Access 8, 153610–153629 (2020)
Liu, D., Cui, L., Cheng, W., Zhao, D., Wen, W.: Rolling bearing fault severity recognition via data mining integrated with convolutional neural network. IEEE Sens. J. 22(6), 5768–5777 (2022)
Zhang, S., Ye, F., Wang, B., Habetler, T.G.: Semi-supervised bearing fault diagnosis and classification using variational autoencoder-based deep generative models. IEEE Sens. J. 21(5), 6476–6486 (2021)
Xing, S., Lei, Y., Wang, S., Jia, F.: Distribution-invariant deep belief network for intelligent fault diagnosis of machines under new working conditions. IEEE Trans. Ind. Electron. 68(3), 2617–2625 (2021)
Yang, J., Liu, J., Xie, J., Wang, C., Ding, T.: Conditional GAN and 2-D CNN for bearing fault diagnosis with small samples. IEEE Trans. Instrum. Meas. 70, 1–12 (2021)
Cui, M., Wang, Y., Lin, X., Zhong, M.: Fault diagnosis of rolling bearings based on an improved stack autoencoder and support vector machine. IEEE Sens. J. 21(4), 4927–4937 (2021)
Yu, J.: Local and nonlocal preserving projection for bearing defect classification and performance assessment. IEEE Trans. Ind. Electron. 59(5), 2363–2376 (2012)
Pang, X., Xue, X., Jiang, W., Lu, K.: An investigation into fault diagnosis of planetary gearboxes using a bispectrum convolutional neural network. IEEE/ASME Trans. Mechatron. 26(4), 2027–2037 (2021)
Ye, Z., Yu, J.: Multiscale weighted morphological network based feature learning of vibration signals for machinery fault diagnosis. IEEE/ASME Trans. Mechatron. 27(3), 1692–1703 (2022)
Yu, H., Wang, K., Li, Y.: Multiscale representations fusion with joint multiple reconstructions autoencoder for intelligent fault diagnosis. IEEE Signal Process. Lett. 25(12), 1880–1884 (2018)
Vaswani, A., Shazeer, N., Parmar, N., Uszkoreit, J., Jones, L., Gomez, A. N., Kaiser, Ł., Polosukhin, I.: Attention is all you need. In: Proceeding of Neural Information Processing Systems, pp. 5998–6008 (2017)
LeCun, Y., Boser, B., Denker, J., Henderson, D., Howard, R., Hubbard, W., Jackel, L.: Backpropagation applied to handwritten zip code recognition. Neural Comput. 1(4), 541–551 (1989)
Lessmeier, C., Kimotho, J. K., Zimmer, D., Sextro, W.: Condition monitoring of bearing damage in electromechanical drive systems by using motor current signals of electric motors: a benchmark data set for data-driven classifification. In: European Conference of the Prognostics and Health Management Society, pp. 1–18 (2016)
Wang, H., Li, S., Song, L., Cui, L., Wang, P.: An enhanced intelligent diagnosis method based on multi-sensor image fusion via improved deep learning network. IEEE Trans. Instrum. Meas. 69(6), 2648–2657 (2020)
Pham, M.T., Kim, J.-M., Kim, C.H.: Accurate bearing fault diagnosis under variable shaft speed using convolutional neural networks and vibration spectrogram. Appl. Sci. 10(8), 1–14 (2020)
Hoang, D.T., Kang, H.J.: Rolling element bearing fault diagnosis using convolutional neural network and vibration image. Cogn. Syst. Res. 53, 42–50 (2019)
Funding
This work is supported by the Qingdao Postdoctoral Science Foundation (QDBSH20220202007).
Author information
Authors and Affiliations
Contributions
HL designed the network structure and conducted the experimental validation, and DW wrote the main manuscript text.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no financial or proprietary interests in any material discussed in this article.
Ethical approval
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, H., Wang, D. Multilevel feature fusion of multi-domain vibration signals for bearing fault diagnosis. SIViP 18, 99–108 (2024). https://doi.org/10.1007/s11760-023-02715-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11760-023-02715-8