Skip to main content
Log in

Sonocatalytic removal of methylene blue from water solution by cobalt ferrite/mesoporous graphitic carbon nitride (CoFe2O4/mpg-C3N4) nanocomposites: response surface methodology approach

  • Research Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

In this study, cobalt ferrite/mesoporous graphitic carbon nitride (CoFe2O4/mpg-C3N4) nanocomposites were successfully synthesized by using a two-step protocol. Firstly, monodispersed CoFe2O4 nanoparticles (NPs) were synthesized via thermal decomposition of metal precursors in a hot surfactant solution and then they were assembled on mpg-C3N4 via a liquid phase self-assembly method. The sonocatalytic performance of as-synthesized CoFe2O4/mpg-C3N4 nanocomposites was evaluated on the methylene blue (MB) removal from water under ultrasonic irradiation. For this purpose, response surface methodology (RSM) based on central composite design (CCD) model was successfully utilized to optimize the MB removal over CoFe2O4/mpg-C3N4 nanocomposites. Analysis of variance (ANOVA) was applied to investigate the significance of the model. The results predicted by the model were obtained to be in reasonable agreement with the experimental data (R2 = 0.969, adjusted R2 = 0.942). Pareto analysis demonstrated that pH of the solution was the most effective parameter on the sonocatalytic removal of MB by CoFe2O4/mpg-C3N4 nanocomposites. The optimum catalyst dose, initial dye concentration, pH, and sonication time were set as 0.25 g L−1, 8 mg L−1, 8, and 45 min, respectively. The high removal efficiency of MB dye (92.81%) was obtained under optimal conditions. The trapping experiments were done by using edetate disodium, tert-butyl alcohol, and benzoquinone. Among the reactive radicals, OH played a more important role than h+ and \( {O}_2^{-\bullet } \) in the MB dye removal process. Moreover, a proposed mechanism was also presented for the removal of MB in the presence of CoFe2O4/mpg-C3N4 nanocomposites under the optimized sonocatalytic conditions. Finally, a reusability test of the nanocomposites revealed a just 9.6% decrease in their removal efficiency after five consecutive runs.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

Download references

Acknowledgements

Paria Eghbali gratefully acknowledges the support of Atatürk University as a post-doctoral researcher.

Funding

The financial support by the Science Academy in the context of “Young Scientists Award Program (BAGEP)” is highly acknowledged.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Aydin Hassani or Önder Metin.

Additional information

Responsible editor: Philippe Garrigues

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hassani, A., Eghbali, P. & Metin, Ö. Sonocatalytic removal of methylene blue from water solution by cobalt ferrite/mesoporous graphitic carbon nitride (CoFe2O4/mpg-C3N4) nanocomposites: response surface methodology approach. Environ Sci Pollut Res 25, 32140–32155 (2018). https://doi.org/10.1007/s11356-018-3151-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-018-3151-3

Keywords

Navigation