Abstract
In order to more accurately evaluate or calibrate the electronic torsional vibration test analyzer and analysis method, a torsional vibration signal generator is developed in the present study. The developed device generates a tooth pulse interval sequence based on the inverse solution of the shaft torsional equation. Moreover, a single-frequency signal, inter-harmonic signal, time-varying harmonic signal, and noise-containing time-varying inter-harmonic signal are simulated. The pulse width modulation module of TMS320F28335 is used to generate the instantaneous speed gear pulse signal, while the external expanded digital to analog conversion module is utilized to generate the corresponding speed analog signal. The hardware structure of the proposed generator has remarkable advantages, including simple structure, low-cost operation and easy to use interface. Moreover, it can be applied to evaluate or calibrate the torsional vibration test analyzer and analytical methods.
Similar content being viewed by others
References
Taradai, D. V., Deomidova, Y. A., Zile, A. Z., et al. (2018). Results from investigations of torsional vibration in turbine set shaft systems. Thermal Engineering, 65(1), 17–26.
Lv, B., Ouyang, H., Li, W., et al. (2016). An indirect torsional vibration receptance measurement method for shaft structures. Journal of Sound & Vibration, 372, S0022460X16001620.
Xue, S., & Howard, I. (2018). Torsional vibration signal analysis as a diagnostic tool for planetary gear fault detection. Mechanical Systems and Signal Processing, 100, 706.
Charles, P., Sinha, J. K., Gu, F., et al. (2009). Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis. Noise & Vibration Bulletin, 321(3), 1171–1185.
Verrecas, B., Janssens, K., & Britte, L. (2014). Comparison of torsional vibration measurement techniques. Advances in Condition Monitoring of Machinery in Non-stationary Operations. Berlin Heidelberg: Springer.
Seidlitz, S., Kuether, R. J., & Allen, M. S. (2016). Experimental approach to compare noise floors of various torsional vibration sensors. Experimental Techniques, 40(2), 661–675.
Palermo, A., Janssens, K., & Britte, L. (2016). Evaluation and improvement of accuracy in the instantaneous angular speed (IAS) and torsional vibration measurement using zebra tapes. Advances in Condition Monitoring of Machinery in Non-Stationary Operations.
Janssens, K., Vlierberghe, P. V., Philippe, D. H., et al. (2011). Zebra tape butt joint algorithm for torsional vibrations. Structural Dynamics (Vol. 3). New York: Springer.
Rivola, A., & Troncossi, M. (2014). Zebra tape identifification for the instantaneous angular speed computation and angular resampling of motorbike valve train measurements. Mechanical Systems and Signal Processing, 44(1–2), 5–13.
Meroño, P. A., Gómez, F. C., Marín, F., & Zaghar, L. (2016). Measurement of torsional vibration to detect angular misalignment through the modulated square wave of an encoder. Measurement Science & Technology, 28(2), 025207.
Lee, J. K., Seung, H. M., Park, C. I., et al. (2018). Magnetostrictive patch sensor system for battery-less real-time measurement of torsional vibrations of rotating shafts. Journal of Sound and Vibration, 414, 245–258.
Vance, J., Zeidan, F., & Murphy, B. (2010). Torsional vibration. Machinery vibration and rotordynamics. London: Wiley-Blackwell.
Du, J. (1994). Monitoring test and instrument for torsional vibration of shafting. Nanjing: Southeast University Press.
Resor, B. R., Trethewey, M. W., & Maynard, K. P. (2005). Compensation for encoder geometry and shaft speed variation in time interval torsional vibration measurement. Journal of Sound and Vibration, 286(4), 897–920.
Remond, D. (1998). Practical performances of high-speed measurement of gear transmission error or torsional vibrations with optical encoders. Measurement Science & Technology, 9(3), 347–353.
Borghesani, P., Pennacchi, P., Chatterton, S., et al. (2014). The velocity synchronous discrete Fourier transform for order tracking in the field of rotating machinery. Mechanical Systems and Signal Processing, 44(1–2), 118–133.
Marple, S. L. J. (1998). Digital spectral analysis with applications. Journal of the Acoustical Society of America, 86(5), 2043.
Huang, N. E., & Wu, Z. (2008). A review on Hilbert-transform: Method and its applications to geophysical studies. Reviews of Geophysics, 46(2), RG2006.
Huang, N. E., Shen, Z., Long, S. R., et al. (1971). The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proceedings A, 1998(454), 903–995.
Daubechies, I., & Heil, C. (1998). Ten lectures on wavelets. Computers in Physics, 6(3), 1671.
Dragomiretskiy, K., & Zosso, D. (2014). Variational mode decomposition. IEEE Transactions on Signal Processing, 62(3), 531–544.
Funding
Not applicable.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhang, Q., Lu, G., Zhang, C. et al. Development of arbitrary waveform torsional vibration signal generator. Telecommun Syst 75, 425–435 (2020). https://doi.org/10.1007/s11235-020-00692-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11235-020-00692-8