Skip to main content

Advertisement

Log in

Bio-sourced porous cellulose microfibrils from coffee pulp for wastewater treatment

  • Original Research
  • Published:
Cellulose Aims and scope Submit manuscript

Abstract

The present work describes the production of novel highly hydrated cellulose microfibrils (CMFs) with unique morphology from coffee pulp waste using specific chemical treatments. The as-produced CMFs were successfully characterized and then used as an adsorbent for removal of methylene blue (MB) from concentrated aqueous solutions. Surprisingly, it was found that the novel CMFs display high water-uptake ability, with a maximum swelling ratio of 265%, and that they form an entangled hydrated network gel in water. The morphological observation and nitrogen adsorption measurement demonstrated that the extracted CMFs exhibit an average fibril diameter of 11.5 µm and mesoporous structure with an average pore size of 6.37 nm. These special features make the as-produced CMFs excellent candidates to be used as adsorbents for removal of MB from concentrated solutions. The performed adsorption studies determined that the adsorption equilibrium was reached within 90 min. The adsorption kinetics data were well fitted to the pseudo-second-order kinetic model, and the adsorption isotherms were well described by the Freundlich isotherm model. In addition, the maximum adsorption capacity was 182.5 mg/g, much higher than that determined for other previously reported cellulose-based adsorbents. Through this study, we have demonstrated a possible strategy to give an added value to the coffee pulp waste, a by-product of the coffee processing industry, which is rich in cellulose, inexpensive and renewable source. Indeed, the extracted CMFs are very attractive for developing a sustainable and economically viable bio-sourced material for future growth of cellulose use in advanced applications.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

Download references

Acknowledgments

The financial assistance of the Office Chérifien des Phosphates (OCP S.A.) in the Moroccan Kingdom toward this research is hereby acknowledged. The authors would like to thank Pr. Jones Alami, head of Materials Science and Nanoengineering (MSN) Department of Mohammed VI Polytechnic University (UM6P), for his help to improve this work.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mounir El Achaby.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 129 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

El Achaby, M., Ruesgas-Ramón, M., Fayoud, NE.H. et al. Bio-sourced porous cellulose microfibrils from coffee pulp for wastewater treatment. Cellulose 26, 3873–3889 (2019). https://doi.org/10.1007/s10570-019-02344-w

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10570-019-02344-w

Keywords

Navigation