Abstract
To improve the efficiency of magnesium sacrificial anodes used in corrosion protection, the effect of microstructure was investigated. Efficiency was improved by controlling the amount of second-phase particles at grain boundaries, by producing a uniform distribution of impurities in the matrix, and by ensuring a micrometer-order cell size via cooling rate and heat treatment. After evaluation with the efficiency test, it was found that the efficiency values were quite good as compared with commercially available magnesium sacrificial anodes.
Similar content being viewed by others
References
H.A. Robinson and P.F. George, Corrosion, 10 (6) (1954), p. 182.
H.A. Robinson, Trans. J. Electrochem. Soc., 90 (1946), p. 485.
J.D. Hanawalt, C.E. Nelson, and J.A. Peloubet, “Corrosion Studies of Magnesium and its Alloys,” Metals Technology (September 1941).
O. Osborn and H.A. Robinson, Corrosion, 8 (4) (1982), p. 114.
C.F. Schrieber, “Sacrificial Anodes,” Cathodic Protection—Theory and Practice (Coventry, U.K.: Pergamon Press, 1982).
J.B. Bessone, R.A. Suarez, and S.M. De Micheli, Corrosion, 37 (1981), p. 533.
R. Tunold et al., Corrosion Sci., 17 (1977), p. 553.
H. Jones, J. Mater. Science, 19 (1984), p. 1043.
ASTM Designation G97-89 (Philadelphia, PA: ASTM, 1989), pp. 1–4.
G. García-Rodriguez, private communication (1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Juárez-Islas, J.A., Genesca, J. & Pérez, R. Improving the efficiency of magnesium sacrificial anodes. JOM 45, 42–44 (1993). https://doi.org/10.1007/BF03222432
Issue Date:
DOI: https://doi.org/10.1007/BF03222432