Skip to main content
Log in

The high speed water tunnel facility at the Indian Institute of Science

  • Published:
Sadhana Aims and scope Submit manuscript

Abstract

The present article about the high speed water tunnel facility at the Indian Institute of Science, Bangalore, provides a general description of the tunnel circuit, and brief reports on the performance of the facility and some typical results from investigations carried out in it. A unique aspect of the facility is that it has a horizontal resorber in the form of a large cylindrical tank located in the lower leg of the circuit. The facility has been used, among other things, for flow visualization studies, and investigations on marine propeller hydrodynamics and “synthetic cavitation”. The last topic has been primarily developed at the Indian Institute of Science and shows considerable promise for basic work in cavitation inception and noise.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Arakeri V H 1986Proc. of the Speciality Conference on advancements in aerodynamics, fluid mechanics and hydraulics (New York:Asce)

    Google Scholar 

  • Arakeri V H, Acosta A J 1973J. Fluid Eng. 95: 519–527

    Google Scholar 

  • Arakeri V H, Govinda Ram H S 1978 Comparative cavitation inception studies on a hemispherically nosed body,Wtl Report No. 78-1, Indian Institute of Science, Bangalore

    Google Scholar 

  • Arakeri V H, Govinda Ram H S 1981 Flow visualization studies on a sphere near its critical Reynolds number, Report No.Wtl-csir/tr. 81.1 Indian Institute of Science, Bangalore

    Google Scholar 

  • Arakeri V H, Govinda Ram H S 1984Curr. Sci. 53: 180–182

    Google Scholar 

  • Arakeri V H, Munjal M L, Mani K, Richard K, Sharma S D 1984 Noise characteristics of marine propellers, Report No.De-nrc/tdp-25/79-84, Indian Institute of Science, Bangalore

    Google Scholar 

  • Arakeri V H, Shanmuganathan V 1986J. Fluid Mech. 159: 131–150

    Article  Google Scholar 

  • Arakeri V H, Sharma S D, Mani K 1985Cavitation and multiphase flow forum (New York:Asme)

    Google Scholar 

  • Holl J W, Wood G M (eds) 1964Cavitation research facilities and techniques (New York:Asme)

    Google Scholar 

  • Iyer N 1985An experimental study on scale effects on cavitation noise, Ph.D. thesis, Indian Institute of Science, Bangalore

    Google Scholar 

  • Lehman A F 1959 The Garfield Thomas water tunnel, ORL Report No. 16597-56, State College, Penn. State University

  • Mani K 1984 Design of open jet test section for an existing high speed water tunnel facility, Report No.De-nrc/tdp-25/Tr-11, Indian Institute of Science, Bangalore

    Google Scholar 

  • Mani K 1987Cavitation inception and noise studies on marine propellers, Ph.D. thesis, Indian Institute of Science, Bangalore

    Google Scholar 

  • Schiebe F R 1982 Measurements of cavitation susceptibility of water using standard bodies, Report No.Safhl-118 University of Minneapolis, Minneapolis

    Google Scholar 

  • Shanmuganathan V, Arakeri V H 1981Fourteenth symp. on naval hydrodynamics (Washington, DC: National Academic Press)

    Google Scholar 

  • Sharma S D, Arakeri V H 1985 An experimental study to assess the significance of flow transition on flow noise, Report No.De-nrc/tdp-59/Tr-3, Indian Institute of Science, Bangalore

    Google Scholar 

  • Silverleaf A 1958 The design of a resorber for a water tunnel Ship, Div. Report No. 1, Natl. Phys. Lab., England

    Google Scholar 

  • Thwaites B 1946 On the design of contractions for wind tunnels, ACR R and M No. 2278 (England)

  • Ward T M 1977 The hydrodynamics laboratory at the California Institute of Technology - 1976,Asme Paper No. 77-FE-12, Joint Applied Mech., Fluids Eng. and Bio-Eng. Conf. New Haven

Download references

Author information

Authors and Affiliations

Authors

Additional information

The Indian Institute of Science High Speed Water Tunnel owes its existence to the vision of Professor N S Govinda Rao. The facility was designed by the late Mr Nanjundaswamy under the supervision of Professor K Seetharamaiah who was instrumental in its fabrication and installation. All the tunnel components except for the main motor and pump were fabricated by M/s Tungabhadra Steel Products Ltd., Hospet, Karnataka. The financial support for the design, fabrication and installation of the high speed water tunnel facility was given by the Central Board of Irrigation and Power, Government of India. The financial grant for the construction of the building to house the facility has been provided by the University Grants Commission, New Delhi. Financial support for the addition of the open-jet test section and procurement of all the instruments listed has been given by the Department of Electronics/Electronics Commission under its technology development projects.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Arakeri, V.H., Sharma, S.D., Mani, K. et al. The high speed water tunnel facility at the Indian Institute of Science. Sadhana 13, 223–235 (1988). https://doi.org/10.1007/BF02759887

Download citation

  • Received:

  • Revised:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02759887

Keywords

Navigation