Abstract
A real-time heat-transfer model for continuous slab casting is presented. The model calculates the strand temperatures and the solid shell thickness profile along the machine as a function of the actual casting variables, strand geometry, and steel grade. The special requirements con-cerning the real-time use of the model and, in general, the accuracy of the model are also studied and discussed. The model has been tested by carrying out industrial trials. Some examples of the differences between the calculated and measured surface temperatures are presented. A spe-cial procedure to determine the boundary conditions for the secondary cooling zones from tem-perature measurements is also described.
Similar content being viewed by others
References
J.K. Brimacombe, P.K. Agarwal, LA. Baptista, S. Hibbins, and B. Prabhakar: InProc. 63rd National Open Hearth and Basic Oxygen Steel Conf., Washington, Mar. 23–26, 1980, appeared inProc. AIME, vol. 63, pp. 235–52.
B. Rogberg:Scand. J. Metall, 1983, vol. 12, pp. 13–21.
L. Holappa, E. Laitinen, S. Louhenkilpi, and P. Neittaanmāki: InProc. of 24th Annual Conf. of Metallurgists, The Metallurgical Society of CIM, Vancouver, Canada, 1985, pp. 242–59.
V.A. Wills and D.G. McCartney:Mater. Sci. Technol., 1992, vol. 8, pp. 114–22.
K.-H. Tache:Int. J. Numer. Methods Eng., 1985, vol. 21, pp. 543–54.
K. Kawakami, T. Kitagawa, K. Murakami, Y. Miyashita, Y. Tsuchida, and T. Kawawa:Nippon Kokan Tech. Rep., 1982, No. 36, pp. 26–41.
K. Thompson and M. Wolf:Concost Technol. News, 1988, vol. 27, p. 6.
S. Kojima, T. Matsukawa, and M. Kodama: InSteelmaking Proc. of the Iron and Steel Society, Pittsburgh, PA, 1982, pp. 255–62.
M. Onishi, T. Ueda, Y. Shinjo, H. Mizata, M. Yao, and T. Fujimura:Kawasaki Steel Tech. Rep., 1981, No. 3, pp. 13–25.
K. Okamura and H. Kawashima:The Sumitomo Search, 1991, No. 45, pp. 9–16.
J.E. Lait, J.K. Brimacombe, and F. Weinberg:Ironmaking and Steelmaking, 1974, vol. 1, pp. 90–97.
J. Yamasaki, S. Miyahara, M. Kodama, T. Matsukawa, J. Matsuno, and K. Suzuki: inProc. of IFAC Control Science and Technology, Kyoto, Japan, 1981, H. Akashi, ed., Pergamon, Oxford, 1982, pp. 2639–43.
M. Bamberger and B. Prinz:Z. Metall., 1986, vol. 77, pp. 234–38.
B.I. Krasnov, D.P. Evteev, M.I. Lebedeva, Yu. M. Tsier, and A.V. Skolobanov:Steel USSR, 1980, vol. 10, pp. 75–77.
P.J. Flint: InProc. of 9th Process Technology, 73rd Steelmaking Conf, Detroit, MI, 1990.
E. Laitinen, S. Louhenkilpi, T. Mānnikkö, and P. Neittaanmāki: InProc. of the 4th Ann. Conf. of the European Consortium for Mathematics in Industry (ECMI), St. Wolfgang, Austria, May 29–June 2, 1989, Hansjorg Wacker and Walter Zulehner Teubner, eds., Stuttgart, 1991, pp. 109–21.
S. Barozzi, P. Fontana, and P. Pragliola:Iron Steel Eng., 1986, vol. 63, pp. 21–26.
K. Okuno, H. Naruwa, T. Kuribayashi, and T. Takamoto:Iron Steel Eng., 1987, vol. 64, pp. 34–38.
T. Takawa, R. Takahashi, and M. Tatsuwaki:The Sumitomo Search, 1987, May, No. 34, pp. 79–87.
S. Kawasaki, H. Arita, M. Kikunaga, Y. Chida, and Z. Kajita:Nippon Steel Tech. Rep., 1984, No. 23, pp. 69–76.
K.-H. Spitzer, K. Harste, B. Weber, P. Monheim, and K. Schwerdtfeger:ISIJ Int., 1992, vol. 32, pp. 848–56.
E.A. Mizikar:Trans TMS-AIME, 1967, vol. 239, pp. 1747–53.
I. Saucedo, J. Beech, and G.J. Davies:Met. Technol., 1982, vol. 9, pp. 282–91.
R.B. Mahapatra, J.K. Brimacombe, I. Samarasekera, E.F. Paterson, and J.D. Young: InProc. of 4th Int. Conf. on Continuous Casting, Bryssel, Belgium, 1988, Verlag Stahleisen mbH, Düsseldorf, 1988, pp. 655–67.
Y. Nishida, W. Droste, and S. Engler:Metall. Trans B, 1986, vol. 17B, pp. 833–44.
H. Jacobi, G. Kaestle, and K. Wünnenberg:Ironmaking and Steelmaking, 1984, vol. 11, pp. 132–45.
A. Etienne and B. Mairy:CRM, 1979, No. 55, pp. 1–11.
J.K. Brimacombe, P.K. Agarwal, S. Hibbins, B. Prabhaker, and L.A. Baptista:Continuous Casting, AIME, New York, NY, 1984, vol. 2.
N. Kikuchi:Finite Element Methods in Mechanics, Cambridge University Press, Cambridge, United Kingdom, 1986.
A. Brooks and T.J.R. Hughes:Comput. Methods Appl. Mech. Eng., 1982, vol. 32, pp. 199–259.
S.V. Patankar:Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corporation, Washington, 1980.
E. Laitinen and P. Neittaanmäki:J. Eng. Math., 1988, vol. 22, pp. 335–54.
E. Laitinen: Ph.D. Thesis, University of Jyväskylä, Jyväskylä, Finland, 1989.
M. Krizek and P. Neittaanmäki:Finite Element Approximation of Variational Problems and Applications, Longman Scientific and Technical, Longman Group UK Limited, Essex, United Kingdom, 1990.
Joel M. Crichlow:An Introduction to Distributed and Parallel Computing, Prentice-Hall International (UK) Ltd., 1988.
F. Richter:Die Wichtigsten Physikalischen Eigenschaften von 52 Eisenwerkstoffen, Verlag Stahleisen M.B.H., Düsseldorf, 1973.
T. Ashworth and D.R. Smith:Therm. Conduct., 1985, No. 18, pp. 175–85.
A. Goldsmith, T.E. Waterman, and H.J. Hirschhorn:Handbook of Thermophysical Properties of Solid Material, vol. II: ALLOYS, The Macmillan Company, New York, NY, 1961.
J. Miettinen:Metall. Trans. A, 1992, vol. 23A, pp. 1155–70.
C. Khler, R. Jeschar, R. Scholz, J. Slowik, and G. Borchardt:Steel Res., 1990, vol. 61, pp. 295–301.
J. Slowik, G. Borchardt, C. Khler, R. Jeschar, and R. Scholz:Steel Res., 1990, vol. 61, pp. 302–11.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Louhenkilpi, S., Laitinen, E. & Nieminen, R. Real-time simulation of heat transfer in continuous casting. Metall Trans B 24, 685–693 (1993). https://doi.org/10.1007/BF02673184
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02673184