Abstract
An internal conversion electron spectrometer with high energy resolution has been constructed by using a windowless Si(Li) detector. After its characteristics were examined fundamentally, it was applied to determine the240Pu to239Pu isotope ratio. As a result, the energy resolution realized was demonstrated to be satisfactory.
Similar content being viewed by others
References
F. AMOUDRY, P. BURGER, Nucl. Instr. Methods Phys. Res., 223 (1984) 360.
T. DRAGNEV, K. SCHARF, Int. J. Appl. Radiat. Isot., 26 (1975) 125.
H. UMEZAWA, T. SUZUKI, S. ICHIKAWA, J. Nucl. Sci. Technol., 13 (1976) 327.
T. E. SAMPSON, S. T. HSUE, J. L. PARKER, S. S. JOHNSON, D. F. BOWERSOX, Nucl. Instr. Methods, 193 (1982) 177.
E. N. SLOTH, M. H. STUDIER, Anal. Chem., 30 (1958) 1751.
S. HISAMATU, M. SAKANOUE, Nucl. Instr. Methods Phys. Res., 226 (1984) 482.
Y. SHIOKAWA, S. SUZUKI, J. Radioanal. Nucl. Chem., 102 (1986) 239.
E. BROWNE, J. M. DAIRIKI, R. E. DOEBLER, Table of Isotopes, John Wiley & Sons, New York, 1978.
F. L. MOORE, J. E. HUDGENS, Jr., Anal. Chem., 29 (1957) 1767.
M. MIGUEL, A. DELLE SITE, S. DERON, W. RAAB, H. SWIETLY Nucl. Instr. Methods Phys. Res., 223 (1984) 270.
G. F. KNOLL, Radiation Detection and Measurement, John Whiley & Sons, New York, 1979.
L. KARLSSON, Nucl. Instr. Methods, 109 (1973) 101.
F. S. GOULDING, D. A. LANDIS, IEEE Trans. Nucl. Sci., NS-29 (1982) 1125.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shiokawa, Y., Suzuki, K., Yagi, M. et al. A new internal conversion electron spectrometer and its application to determine the240Pu to239Pu isotope ratio. Journal of Radioanalytical and Nuclear Chemistry, Articles 130, 55–62 (1989). https://doi.org/10.1007/BF02037700
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02037700