Summary
The concept of recoverable strain is discussed and measured in connection with extrusion, injection molding and uniaxial tensile deformations at constant jaw speed. The data are treated phenomenologically according to the theory of linear viscoelasticity with a subsequent non-linearization. Recoverable strain for the case of extrusion is given in terms of the shear rate and capillary dimensions together with a knowledge of independently determined material parameters. Estimates of the high shear rate values of the equilibrium elastic compliance,J e , are given.
Zusammenfassung
Das Konzept der elastischen Dehnung wird diskutiert, und diesbezügliche Messungen werden in Verbindung mit Extrusion, Spritzgießen und einachsiger Verstreckung bei konstanter Verstreckgeschwindigkeit durchgeführt. Die Ergebnisse werden phänomenologisch diskutiert unter Anwendung der Theorie der linearen Viskoelastizität und nachfolgender Nicht-Linearisierung. Die elastische Dehnung bei der Extrusion wird in Abhängigkeit von der Schergeschwindigkeit und den Kapillardimensionen, sowie von einigen unabhängig bestimmten Materialparametern angegeben. Schätzwerte der GleichgewichtskomplianzJ e für hohe Schergeschwindigkeiten werden mitgeteilt.
Similar content being viewed by others
References
Ferry, J. D., Viscoelastic Properties of Polymers, 2nd Edition, p. 249 (New York 1970).
Sips, R. J. Polym. Sci.5, 69 (1950).
Chapoy, L. L. Rheol. Acta8, 497 (1969).
Chapoy, L. L., S. Pedersen, to be published.
Robertson, R. E. J. Chem. Phys.44, 3950 (1966).
Graessley, W. W. J. Chem. Phys.47, 1942 (1967).
Pedersen, S., S. Damjanow, L. L. Chapoy, to be published.
Tobolsky, A. V., L. L. Chapoy J. Polymer Sci.B6, 493 (1968).
Huseby, T. W. Trans. Soc. Rheology10, 181 (1966).
Middleman, S., The Flow of High Polymers, p. 28ff. (New York 1968).
Pearson, K. Tables of the IncompleteΓ Function, His Majesty's Stationery Office (London 1922).
Denson, C. D. Polymer Engineering and Sci.13, 125 (1973).
Stevenson, J. F. AIChE J.18, 540 (1972).
Ferry, J. D., Viscoelastic Properties of Polymers, 2nd Edition, p. 75 (New York 1970).
Ferry, J. D., Viscoelastic Properties of Polymers, 2nd Edition, p. 417 (New York 1970).
Woebcken, W. Kunststoffe51, 547 (1961).
Tanner, R. I. J. Polymer Sci. A-2,8, 2067 (1970).
Graessley, W. W., S. D. Glasscock, R. L. Crowley Trans. Soc. Rheol.14, 519 (1970).
Graessley, W. W. Adv. Polymer Sci.16, 58 (1974).
Vlachopoulos, J., M. Horie, S. Lidokis Trans. Soc. Rheology16, 669 (1972).
Tanner, R. I. Applied Polymer Symposia20, 201 (1973).
Graessley, W. W. Adv. Polymer Sci.16, 25 (1974).
Graessley, W. W. Adv. Polymer Sci.16, 34 (1974).
Einaga, Y., K. Osaki, M. Kurata Polymer J.2, 550 (1971).
Einaga, Y., K. Osaki, M. Kurata, S. Kimura, N. Yamada, M. Tamura Polymer J.5, 91 (1973).
Osaki, K., Y. Einaga, M. Kurata, N. Yamada, M. Tamura Polymer J.5, 283 (1973).
Graessley, W. W. Adv. Polymer Sci.16, 68 (1974).
Graessley, W. W., L. Segal Macromolecules2, 49 (1969).
Plazek, D. J., V. M. O'Rourke J. Polymer Sci. A-2,9, 209 (1971).
Penwell, R. C., W. W. Graessley, A. Kovacs J. Polymer Sci. A-2,12, 1771 (1974).
Abdel, S. I., O. Hassager, R. B. Bird Polymer Engineering and Science14, 859 (1974).
Menges, G., G. Wübken, Berichte zum 6. Kunststofftechnischen Kolloquium des IKV in Aachen, IV-1,21 (1972).
Cox, H. W., C. W. Macosko SPE ANTEC20, 28 (1974).
Chapoy, L. L. Rheol. Acta13, 779 (1974).
Ballman, R. L. Rheol. Acta4, 137 (1965).
Vinogradov, G. V., A. I. Leonov, A. N. Prokunin Rheol. Acta8, 482 (1969).
Cogswell, F. N. Applied Polymer Symposium27, 1 (1975).
Author information
Authors and Affiliations
Additional information
In partial fulfilment of the Teknisk Licentiate degree.
With 16 figures and 5 tables
Rights and permissions
About this article
Cite this article
Heron, H., Pedersen, S. & Chapoy, L.L. Linear viscoelastic theory and the understanding of orientation, recoverable strain and mechanical properties resulting from thermoplastic processing. Rheol Acta 15, 379–402 (1976). https://doi.org/10.1007/BF01574494
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01574494