Skip to main content
Log in

Development of composite coaxial cylinder stress analysis model and its application to SIC monofilament systems

  • Papers
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

An analytical model is presented allowing prediction of the principal stresses in a system composed of a set of coaxial cylinders, subject to temperature change or applied stress. The materials must exhibit transverse isotropy of stiffness and thermal expansivity. The model represents a development of an analysis published by Mikata and Taya, the modification allowing any number of component cylinders and a finite outer radius. Use of the model is illustrated by means of a series of examples involving SiC monofilaments. Application to the behaviour of composites containing many aligned fibres is demonstrated, using cylinder radii appropriate for the fibre volume fraction in the composite. It is shown by comparison with predictions from an Eshelby model that this is an acceptable approximation, preferable to the surrounding of fibre and matrix by an outer “composite” layer of infinite radius.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. R. L. Mehan, M. R. Jackson andM. D. McConnel,J. Mater. Sci. 18 (1983) 3195.

    Google Scholar 

  2. R. R. Kieschke, R. E. Somekh andT. W. Clyne, in “Developments in the Science and Technology of Composite Materials”, Proceedings of the 3rd European Conference on Composite Materials, Bordeaux, March 1989, edited by A. R. Bunsell, P. Lamicq and A. Massiah (Elsevier, London, 1989) pp. 265–72.

    Google Scholar 

  3. R. R. Kieschke, C. M. Warwick andT. W. Clyne,Metall. Trans. 39 (1990) 445.

    Google Scholar 

  4. T. Ishikawa, K. Koyoma andS. Kobayashi,J. Compos. Mater. 12 (1978) 153.

    Google Scholar 

  5. D. Iesan,J. Thermal Stress 3 (1980) 495.

    Google Scholar 

  6. Y. Mikata andM. Taya,J. Compos. Mater. 19 (1985) 554.

    Google Scholar 

  7. J. F. Nye, “Physical properties of crystals — their representation by tensors and matrices” (Clarendon, Oxford, 1985) p. 150et seq.

    Google Scholar 

  8. R. R. Kieschke, R. E. Somekh andT. W. Clyne,Acta. Metall. Trans. 39 (1991) 427.

    Google Scholar 

  9. K. M. Brown, R. W. Hendricks andW. D. Brewer, in “Fundamental Relationships between Microstructure and Mechanical Properties of Metal Matrix Composites”, edited by P. K. Liaw and M. N. Gungor, TMS Fall Meeting 1989 (TMS-AIME, Warrendale, 1990) pp. 269–286.

    Google Scholar 

  10. J. D. Eshelby,Proc. Roy. Soc. A241 (1957) 376.

    Google Scholar 

  11. T. Mura, in “Micromechanics of Defects in Solids” (Martinus Nijhoff, Dordrecht, The Netherlands, 1987).

    Google Scholar 

  12. M. Taya andR. J. Arsenault, “Metal Matrix Composites” (Pergamon, New York, 1989).

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Warwick, C.M., Clyne, T.W. Development of composite coaxial cylinder stress analysis model and its application to SIC monofilament systems. J Mater Sci 26, 3817–3827 (1991). https://doi.org/10.1007/BF01184978

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01184978

Keywords

Navigation