Abstract
A contour control strategy has been studied in this paper to improve the contour error of CNC machine tools. First, a single axis controller is analysed and then a velocity feedforward controller is added in the velocity loop. To further reduce the contour error, a cross-coupled controller is adopted and an algorithm for an on-line estimation of the contour error in arbitrary curved contouring is proposed. These controller parameters are all optimised by an efficient robust optimisation technique using genetic algorithms. Experimental results are provided to illustrate the proposed methods.
Similar content being viewed by others
References
Y. Koren, “Cross-coupled biaxial computer control for manufacturing systems”,ASME Journal of Dynamic Systems, Measurement, and Control,102, pp. 265–272, 1980.
K. Srinivasan and P. K. Kulkarni, “Cross-coupled control of biaxial feed drive servomechanisms”,ASME Journal of Dynamic Systems, Measurement, and Control,112, pp. 225–231, 1990.
Y. Koren and C. C. Lo, “Variable-gain cross-coupling controller for contouring”,Annals of the CIRP,40(1), pp. 371–374, 1991.
H. Y. Chuang and C. H. Liu, “Cross-coupled adaptive feedrate control for multiaxis machine tools”,ASME Journal of Dynamic Systems, Measurement, and Control,113, pp. 451–457, 1991.
H. Y. Chuang and C. H. Liu, “A model-referenced adaptive control strategy for improving contouring accuracy of multiaxis machine tools”,IEEE Transactions on Industry Application,28(1), pp. 221–227, 1992.
O. Masory, “Improving contouring accuracy of NC/CNC systems with additional velocity feedforward loop”,ASME Journal of Engineering for Industry,104, pp. 227–230, 1986.
J. H. Holland,Adaptation in Natural and Artificial Systems, The University of Michigan Press, Ann Arbor, 1975.
D. E. Goldberg,Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, New York, 1989.
J. J. Grefenstette, “Optimization of control parameters for genetic algorithms”,IEEE Transactions on Systems Man and Cybernetics,16, pp. 122–128, 1986.
L. Davis,Handbook of Genetic Algorithms, Van Nostrand Reinhold, New York, 1991.
D. A. Linkens and H. O. Nyongesa, “Genetic algorithms for fuzzy control, part 1: offline system development and application”,IEE Proc. Control Theory Appl.,142(3), pp. 161–176, 1995.
D. A. Linkens and H. O. Nyongesa, “Genetic algorithms for fuzzy control, part 2: online system development and application”,IEE Proceedings D Control Theory and Application,142(3), pp. 177–185, 1995.
B. C. Kuo,Automatic Control System, Prentice-Hall, Englewood Cliffs, New Jersey, 1987.
Y. S. Tarng and H. E. Cheng, “An investigation of stick-slip friction on the contouring accuracy of CNC machine tools”,International Journal of Machine Tools Manufacture,35(4), pp. 565–576, 1995.
Y. S. Tarng, J. Y. Kao and Y. S. Lin, “Identification of and compensation for backlash on the contouring accuracy of CNC machining centers”,International Journal of Advanced Manufacturing Technology,13(2), pp. 77–85, 1997.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tarng, Y.S., Chuang, H.Y. & Hsu, W.T. An optimisation approach to the contour error control of CNC machine tools using genetic algorithms. Int J Adv Manuf Technol 13, 359–366 (1997). https://doi.org/10.1007/BF01178256
Issue Date:
DOI: https://doi.org/10.1007/BF01178256