Literature cited
D. Geiselbrecht, “Application of microprocessors to compressor engine control. S.I., S. a.,” Material from Teledyne Geotek (1976).
B. P. Gupta and M. F. Jeffrey, “Optimize centrifugal compressor performance,” Hydrocarbon Processing,58, No. 6, 88–92 (1979).
Y. Hibino et al., “Control system for centrifugal compressor energy saving,” Control Sci. and Technol. Progr. Soc. Proc. 8th Triennial World Congress of the I. F. A. C., Kyoto, 1981, Oxford et al. (1982), Vol. 5, pp. 2701–2706, 2714.
F. Kano et al., “Large, high-efficiency turbocompressor,” R & D, Kobe Steel Engineering Reports (1988), Vol. 38, No. 2, pp. 61–64
H. Terai, “Turbocompressor with computerized optimum-efficiency control device,” R & D, Kobe Steel Engineering Reports (1988), Vol. 38, No. 3, p. 99.
B. Fisher, “Operating centrifugal compressors in parallel,” Process Engineering, No. 6, 59, 61–62 (1984).
“Compressor control block,” Neft' Gaz Neftekhim. Rubezhom, No. 4, 103 (1987).
“Compressors are energy-optimized,” Engineer's Digest,44, No. 6, 17–18 (1983).
“A new approach to industrial turbocompressors,” Plant Engineer,27, No. 3, 27–28 (1983).
“A new energy-efficiency Turbo Air TA-18 centrifugal compressor,” Joy Manufacturing Co., Shauberg, S. A.
“Turbocompressors,” Drucklufttechnik, No. 1–2, 32 (1989).
“Standard microprocessor control panel,” Hispano-Suiza, Bois-Colombes, S. A. 2.
A. V. Prokhorov, “Compressors available at the Petroleum-Gas Fair, France 1986,” ékspress-informatsiya [Express Information], Series KhM-5 (1987), No. 2, pp. 1–5.
F. Rozmus et al., “Compression relocation and renovation met short project lead time, smoothly and successfully,” Diesel Gas Turbine Worldwide, No. 5, 48, 50, 52 (1988).
A. W. Langill, “Microprocessor-based control of large constant-speed centrifugal compressors,” in: Instrumentation in Aerospace Industry, Vol. 28: Proc. 28th International Instrumentation Symposium, Las Vegas, Nevada, May 3–6, 1982. Part 2. Research Triangle Park, North Carolina (1982), pp. 591–602.
R. Winter, “Menage turbocompressors better with computer-based controls,” Pipe Line Industry,68, No. 4, 29–31 (1988).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 3, pp. 20–24, March, 1993.
Rights and permissions
About this article
Cite this article
Prokhorov, A.V., Onuchin, M.F. Compressors with microprocessor control, monitorng, and safety systems. Part I (review of foreign information). Chem Petrol Eng 29, 129–134 (1993). https://doi.org/10.1007/BF01149364
Issue Date:
DOI: https://doi.org/10.1007/BF01149364