This is a preview of subscription content, log in via an institution to check access.
Literature Cited
S. A. Ambartsumyan, Theory of Anisotropic Shells [in Russian], Fizmatgiz, Moscow (1961).
Yu. A. Ashmarin, “On the stress state around a circular hole in an orthotropic cylindrical shell,” Prikl. Mekh.,2, No. 7, 22–26 (1966).
Yu. A. Ashmarin and A. I. Otvechalin, “Experimental investigation of stress concentration around a circular hole in a cylindrical orthotropic shell,” in: Transactions of the VI All-Union Conference on the Theory of Plates and Shells (Baku, 1966), Nauka, Moscow (1966), pp. 103–104.
A. V. Burlakov, G. I. L'vov, and O. K. Morachkovskii, Creep of Thin Shells [in Russian], Khar'kov. Univ., Khar'kov (1977).
O. A. Goroshko and I. G. Strel'chenko, “Stress-strain state near the intersection of cylindrical glass-plastic shells,” Mekh. Polim., No. 2, 369–370 (1976).
O. M. Guz', “Stress concentration around a circular hole in a spherical anisotropic shell,” Prikl. Mekh.,7, No. 4, 427–431 (1961).
O. M. Guz', “Axisymmetric deformation of hollow orthotropic shells,” Dopov. Akad. Nauk UkrRSR, No. 8, 1044–1047 (1962).
O. M. Guz', “Stress concentration around a circular hole, reinforced with a stiff pipe, in a cylindrical shell,” Dopov. Akad. Nauk UkrRSR, No. 12, 1594–1597 (1962).
A. N. Guz', I. S. Chernyshenko, and K. I. Shnerenko, Spherical Bottoms Weakened by Holes [in Russian], Naukova Dumka, Kiev (1970).
A. N. Guz' and K. I. Shnerenko, “Stress concentration around holes in shells made of a material with a low shear modulus,” Prikl. Mekh.,6, No. 8, 15–23 (1970).
A. N. Guz' and K. I. Shnerenko, “On investigating stress distribution around holes in reinforced plates,” Dokl. Akad. Nauk. UkrSSR Ser. A, No. 8, 699–702 (1978).
A. N. Guz' and K. I. Shnerenko, “Thin shells of composite materials weakened by holes,” Mekh. Kompozit. Mater., No. 5, 812–834 (1979).
A. N. Guz', I. S. Chernyshenko, Val. N. Chekov, Vik. N. Chekov, and K. I. Shnerenko, “Investigation of the theory of thin shells with holes,” Prikl. Mekh.,15, No. 11, 3–37 (1979).
A. N. Guz', I. S. Chernyshenko, Val. N. Chekhov, Vik. N. Chekhov, and K. I. Shnerenko, Theory of Thin Shells Weakened by Holes [in Russian], Vol. 1 (of 5 volumes: Methods of Shell Design), Naukova Dumka, Kiev (1980).
B. L. Pelekh, “Certain problems of the theory and design of anisotropic shells and plates with a low shear stiffness,” Mekh. Polim., No. 4, 693–717 (1970).
B. L. Pelekh, Theory of Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kiev (1973).
B. L. Pelekh, “Certain problems of developing a theory and methods of designing anisotropic shells and plates with a finite shear stiffness (survey),” Mekh. Polim., No. 2, 269–284 (1975).
B. L. Pelekh and A. A. Syas'kii, Stress Distribution around Holes in Anisotropic Shells Compliant with Respect to Shear [in Russian], Naukova Dumka, Kiev (1975).
G. N. Savin, Stress Distribution Around Holes [Russian translation], Naukova Dumka, Kiev (1968).
G. Sendetski, “Elastic properties of composites,” in: Mechanics of Composites [Russian translation], Vol. 2, Mir, Moscow (1978), pp. 61–101.
Yu. M. Tarnopol'skii and A. V. Roze, Calculation of Plate Detailing [in Russian], Znatie, Riga (1969).
A. N. Guz', I. S. Chernyshenko, Val. N. Chekhov, Vik. N. Chekhov, and K. I. Shnerenko, Cylindrical Shells Weakened by Apertures [in Russian], Naukova Dumka, Kiev (1974).
K. I. Shnerenko, “Stress concentration near an aperture in an orthotropic layer of a cylindrical shell,” Prikl. Nekh.,6, No. 6, 106–108 (1970).
K. I. Shnerenko, “Towards solving the problem of an anisotropic spherical shell prepared from material with a low dislocation modulus,” Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 12, 1112–1115 (1970).
K. I. Shnerenko, “Axially symmetric stress in a spherical shell with apertures,” Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 2, 178–181 (1971).
K. I. Shnerenko, “Effect of deformation displacement on the stress state of a spherical shell weakened by apertures,” Prikl. Mekh.,7, No. 3, 21–27 (1971).
K. I. Shnerenko, “Stress state of multilayer anisotropic shells with apertures,” Prikl. Mekh.,7, No. 10, 57–61 (1971).
K. I. Shnerenko, “Effect of anisotropy of the material on the stress state of cylindrical shells weakened by apertures,” Prikl. Mekh.,10, No. 1, 124–126 (1974).
K. I. Shnerenko, “Investigation of the stress state of a cylindrical orthotropic shell with reinforced apertures,” Dop. Akad. Nauk Ukr. RSR, Ser. A, 429–431 (1974).
K. I. Shnerenko, “Towards a solution of the problem of the statics of anisotropic shells of variable thickness weakened by apertures,” Prikl. Mekh.,15, No. 12, 51–58 (1979).
K. I. Shnerenko and V. V. Konvalenko, “Experimental investigation of stress distribution near cracks in a glass-plastic cylindrical shell,” Prikl. Mekh.,12, No. 3, 114–117 (1976).
S. P. Timoshenko, “On the corrections for shear of the differential equations for transverse vibrations of prismatic bars,” Phil. Magaz.,41, No. 6, 50–57 (1921).
Additional information
Institute of Mechanics of the Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Prikladnaya Mekhanika, Vol. 17, No. 4, pp. 24–30, April, 1981.
Rights and permissions
About this article
Cite this article
Shnerenko, K.I. Analysis of design methods for composite shells with holes. Soviet Applied Mechanics 17, 328–334 (1981). https://doi.org/10.1007/BF00885374
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00885374