Conclusions
-
1.
New slag baths have been developed with a low viscosity, good wetting capacity, easily removed from the surfaces of parts, and suitable for use as heat transfer agents at temperatures of 780–1150°C.
-
2.
Heating in a slag bath makes it possible to eliminate decarburizing, obtain a bright clean surface after quenching, and reduce the difference in the hardness of the quenched part. Also eliminated are operations such as sandblasting or hydrobrasive cleaning; final machining is also reduced considerably.
Similar content being viewed by others
Literature cited
E. A. Smol'nikov and F. I. Zhdanova, Salt Baths for Heat Treating Parts [in Russian], Moscow (1963).
L. A. Mikhailov, V. G. Kaufman, and V. M. Pylaev, Method of Calculating the Electrical Parameters of Salt Baths [in Russian], Moscow (1956).
F. Waterfall, Metal Treatment and Drop Forging,29, No. 197 (1962).
L. B. Efimova and A. I. Kozlov, Metal. i. Term. Obrabotka Metal., No. 6 (1965).
I. I. Gushchina, in: Materials of the Conference on Progressive Technology of Heating Metal before Forging and Pressing [in Russian], F. É. Dzerzhinskii MDNTP (1964).
S. B. Yakobashvili and I. I. Frumin, Soobshch. Akad. Nauk GruzSSR,29, No. 5 (1962).
R. Eppler, J. Amer. Ceramic Soc.,49, No. 12 (1966).
E. A. Smol'nikov, Metal. i Term. Obrabotka Metal., No. 6 (1955).
E. A. Smol'nikov, Metal. i Term. Obrabotka Metal., No. 2 (1964).
I. F. Afonskii and A. A. Kroshkin, Salt Baths for Heat Treatment [in Russian], Metallurgizdat, Moscow-Leningrad (1934).
Additional information
E. O. Paton Institute of Electric Welding, Academy of Sciences of the Ukrainian SSR. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 13–19, November, 1969.
Rights and permissions
About this article
Cite this article
Frumin, I.I., Yakobashvili, S.B. & Frumin, E.I. Heat treatment in slag baths. Met Sci Heat Treat 11, 845–849 (1969). https://doi.org/10.1007/BF00655516
Issue Date:
DOI: https://doi.org/10.1007/BF00655516