References
I. M. Fedorchenko, V. M. Krechek, and I. I. Panaioti, Modern Friction Materials [in Russian], Naukova Dumka, Kiev (1975).
I. M. Fedorchenko and L. I. Pugina, Sintered Composite Antifriction Materials [in Russian], Naukova Dumka, Kiev (1980).
K. I. Portnoi, S. E. Salibekov, I. L. Svetlov, et al., Structure and Properties of Composite Materials [in Russian], Mashinostroenie, Moscow (1979).
A. K. Jha, T. K. Dan, S. V. Prasad, and P. K. Rohatgi, “Aluminium alloy-solid lubricant talc particle composites,” J. Mater. Sci.,21, 3681–3685 (1986).
A. T. Volochko and G. L. Tsarev, “Investigation of the properties of semiproducts of powdered aluminum with additions of lead and graphite,” Vestnik AN BSSR, Fizika Tekhnichnykh Navuk, No. 1, 12–16 (1989).
P. K. Rohatgi and M. K. Surappa, “Deformation of graphite during hot extrusion of cast aluminum-silicon-graphite particle composites,” Mater. Sci. Eng.,62, 159–162 (1984).
T. L. Tsarev, A. P. Chelyshev, A. T. Volochko, et al., “Properties of hot-formed aluminum-graphite antifriction alloy,” Poroshk. Metall., No. 1, 40–43 (1986).
A. K. Jha, S. V. Prasad, and G. S. Upadhyaya, “Preparation and properties of 6061 aluminium alloy — graphite composites by PM route,” Powder Metal.,32, No. 4, 309–312 (1989).
M. Gorbylevski, “The state of the art and development prospects of composite materials of the system aluminum — carbon fiber,” Probl. Mashinostr. Avtom., No. 26, 45–52 (1989).
W. U. Renjie, Interfacial behaviors and its influence on the mechanical properties of carbon fiber reinforced aluminum composites, in: Interfaces in Polym., Caramic and Metal Matrix Composites: Proceedings 2nd International Conference on Composite Interfaces (Cleveland, Ohio, June 13–17, 1988), New York (1988), pp. 43–56.
E. M. Dever, Wear resistant aluminum p/m parts fabrication and properties, in: Mod. Develop. Powder Met. Proc. Int. Powder Met. Conf., Vol. 10 (1976), pp. 357–373.
Additional information
Institute of the Physics of Strength and Materials Science, Russian Academy of Sciences, Tomsk. Translated from Proshkovaya Metallurgiya, Nos. 3–4, pp. 32–37, March–April, 1994.
Rights and permissions
About this article
Cite this article
Rusin, N.M., Savitskii, A.P. Sintered alloy Al-Ni with additions of graphite. Powder Metall Met Ceram 33, 138–141 (1995). https://doi.org/10.1007/BF00559771
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00559771