Abstract
Up to now it has been recommended that samples submitted as drillings or millings to industrial iron and steel laboratories for analysis by emission spectrometry should be compressed into a pellet or melted in an arc furnace.
An alternative method has been studied for sample preparation by melting the metal in an induction heated furnace and centrifugal casting of the melt. The results obtained for treated iron and steel samples and the respective merits of the three methods on the basis of their analytical results and their rapidity are indicated.
The apparatus used is described and some examples of application are presented. The results are discussed.
Zusammenfassung
Bisher wurde empfohlen, die in den Laboratorien der Stahl- und Eisenindustrie zu analysierenden Späne durch Pressen von Tabletten oder Einschmelzen mit einem Lichtbogenofen in Spektralproben zu verwandeln.
Es wurde nun versucht, die Proben durch Zentrifugalgießen einer durch Hochfrequenzerhitzung der Späne entstandenen Schmelze herzustellen.
Die ersten Ergebnisse mit Stahl und Eisen und die jeweiligen Vorteile der drei Methoden in bezug auf die Analysenergebnisse und die Geschwindigkeit werden erörtert.
Das entwickelte Gerät wird beschrieben; weiter werden einige Anwendungsbeispiele gebracht, deren Ergebnisse diskutiert werden.
Similar content being viewed by others
Literatur
A.S.T.M. Method E-2 SM 9-18, Methods for spectrochemical analysis, 4th Ed., p. 617 (1964). A.S.T.M. 1916 Race St., Philadelphia 3, Pa (U.S.A.).
Eckhard, S.: diese Z. 208, 241, 401 (1965).
—, and R. Marotz: Proceedings Colloquium Spectroscopicum Internationale XII, Exeter, p. 484. London: Hilger & Watts Ltd. 1965.
Fahlbush, W. A.: Appl. Spectroscopy 17, 72 (1963).
Harvey, C. E.: Spectrochemical procedures, Appl. Res. Labs., Glendale, Calif. (U.S.A.), 3. Aufl., p. 322 (1950).
Höller, P.: diese Z. 209, 259 (1965).
—: Arch. Eisenhüttenwes. 37, 483 (1966).
Humbert, M.: Proceedings Colloquium Spectroscopicum Internationale VIII, p. 140. Aarau/Schweiz: M. R. Sauerländer & Co. 1959.
—: Proceedings. Colloquium Spectroscopicum Internationale IX, p. 413. Lyon: Paris: Publications G.A.M.S. 1961.
Prince, L. A., A. J. Elgren, and T. J. de Gropper: Appl. Spectroscopy 20, 372 (1966).
Ramsden, W., and D. F. Sermin: wie [3], p. 489.
Stoll, N., u. A. Wagner: C.N.R.M. 5, 73 (1965).
Author information
Authors and Affiliations
Additional information
Vorgetragen bei der 6. Spektrometertagung 1967 am 23. März in Amsterdam.
Rights and permissions
About this article
Cite this article
Kemp, N. Beitrag zur spektrometrischen Analyse von Spanproben in der Eisenindustrie. Z. Anal. Chem. 240, 303–311 (1968). https://doi.org/10.1007/BF00527974
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00527974