Skip to main content
Log in

Determination of copper in niobium in the sub-ppm range by differential pulse anodic stripping voltammetry

Bestimmung von Kupfer in Niob im Sub-ppm-Bereich durch inverse differenzielle Pulspolarographie

  • Original Papers
  • Published:
Fresenius' Zeitschrift für analytische Chemie Aims and scope Submit manuscript

Zusammenfassung

Niedrige Gehalte an Kupfer in Niob können ziemlich schnell und genau mit Hilfe der inversen differenziellen Pulspolarographie bestimmt werden. Mit einer Anreicherungszeit von 10 min erreicht man eine Drei-Sigma-Nachweisgrenze von ungefähr 10 ppb. Draht-, Platten- und Stangenproben werden durch anodische Oxidation in Methanol und Pulverproben in einer Mischung aus Flußsäure und Salpetersäure gelöst. Die methanolische Lösung wird durch Zugabe von 1 M Oxalsäure und durch Verdampfen des Methanols in eine wäßrige Lösung überführt. Die oxalsaure Lösung ohne bzw. mit Flußsäure wird mit Hilfe der inversen differentiellen Pulspolarographie ohne Abtrennen der Matrix analysiert. Nur wenige Metalle stören die Kupferstufe, wenn sie in großem Überschuß zugegen sind. Man kann diese Störungen u.a. durch Änderung des Elektrolyten, durch Lösungswechsel oder pH-Änderung beseitigen. — Diese Analysenmethode kann auch bei der Bestimmung von Kupfer in Niobsalzen angewandt werden, die sich in Oxalsäure oder Flußsäure lösen.

Summary

Low levels of copper in niobium may be determined rather rapidly and accurately by differential pulse anodic stripping voltammetry (DPASV). Three sigma detection limit of about 10 ppb can be achieved with a stripping time of 10 min. Wire, sheet and rod samples are dissolved by anodic oxidation in methanol and powder samples in a mixture of hydrofluoric acid and nitric acid. The methanolic solution is transferred into an aqueous one by the addition of an aqueous 1 M oxalic acid solution and by the evaporation of the methanol. The oxalic acid and oxalic acid + hydrofluoric acid solutions, respectively, are analysed by DPASV without any separation of the matrix. Only a few metals interfere with the copper signal when they are present in large excess, but these interferences can be overcome by changing the electrolyte, the solution or the pH. — This method can also be applied to the determination of copper in niobium salts that are soluble in oxalic acid or in hydrofluoric acid.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

References

  1. Aladjem, A.: Anal. Chem. 41, 989 (1969)

    Google Scholar 

  2. Draper, N. R., Smith, H.: Applied Regression Analysis. New York: Wiley 1966

    Google Scholar 

  3. Grossmann, O.: Fresenius Z. Anal. Chem. 233, 14 (1968)

    Google Scholar 

  4. Heckner, H. N.: Fresenius Z. Anal. Chem. 293, 222 (1978)

    Google Scholar 

  5. Heckner, H. N.: Fresenius Z. Anal. Chem. (in preparation)

  6. Kirkbright, G. F., Peters, M. K., West, T. S.: Analyst 91, 411 (1966)

    Google Scholar 

  7. Mantel, M., Aladjem, A., Nothmann, R.: Anal. Letters 9(7), 671 (1976)

    Google Scholar 

  8. Neeb, R., Kiehnast, J.: Fresenius Z. Anal. Chem. 241, 142 (1968)

    Google Scholar 

  9. Neeb, R., Saur, D.: Fresenius Z. Anal. Chem. 222, 200 (1966)

    Google Scholar 

  10. Nikolaev, N. S., Buslaev, Y. A.: Russ. J. Inorg. Chem. 4, 84 (1959)

    Google Scholar 

  11. Penner, E. M., Inman, W. R.: Talanta 10, 407 (1963)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Heckner, H.N. Determination of copper in niobium in the sub-ppm range by differential pulse anodic stripping voltammetry. Z. Anal. Chem. 293, 110–114 (1978). https://doi.org/10.1007/BF00486986

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00486986

Key Words

Navigation