Abstract
A method for the dertermination of the shape of structures is formulated in the case when the directions, positions or magnitudes of loads vary with a known probability law. By extending the criterion of the inverse-variational-problem that was proposed in the case of determinate loading conditions, the shape of a body, for which the expected value of the potential energy becomes stationary among all shapes with the same volume, is determined. For the optimization problem, displacements are assumed to be expressed as random variables. Then, a factorization of the variable loads into several fundamental loads is proposed in order to reduce the computational effort. Structures with considerably improved performance can be easily obtained, for the uncertain loading, by the present method.
Similar content being viewed by others
References
Carmichael, D. G. (1981): Probabilistic optimal design of framed structures. Computer-aided design 13-5, 261–264
Horák, V. (1969): Inverse variational principles of continuum mechanics. Praha: Rozpravy Československé Akademie Ved.
Koski, J. (1981): Multicriterion optimization in structural design. In: Gallagher, R. H.; Atrek, E., et al. (ed.): Proc. Intern. Symp. on Optimum Structural Design, pp. 10/29–10/36. University of Arizona, Tucson, Arizona
Kristensen, E. S.; Madsen, N. F. (1976): On the optimum fillets in plates subjected to multiple in-plane loading cases. Intern. J. Numer. Meth. Eng. 10-5, 1007–1019
Pedersen, P.; Jørgensen, L. (1984): Minimum mass design of elastic frames subjected to multiple load cases. Comput. & Struct. 18-1, 147–157
Tada, Y.; Seguchi, Y. (1984): Shape determination of structures based on the inverse variational principle/The finite element approach. In: Atrek, E.; Gallagher, R. H.; Ragsdell, K. M.; Zienkiewicz, O. C. (eds.): New directions in optimum structural design, pp. 197–209. Chichester: Wiley
Author information
Authors and Affiliations
Additional information
Communicated by G. Yagawa, April 19, 1987
Rights and permissions
About this article
Cite this article
Tada, Y., Seguchi, Y. Structural shape determination under uncertain loading conditions. Computational Mechanics 4, 219–228 (1989). https://doi.org/10.1007/BF00296669
Issue Date:
DOI: https://doi.org/10.1007/BF00296669