Abstract
Wireless charging technology (WCT) is mostly used in the domain of power battery packs. The battery wireless charging system (BWCS) should provide the required constant outputs for the power battery packs. The existing charging conversion methods have the defects of more components, low transfer efficiency and poor reliability. To solve above issues, this paper proposes an efficient and simple BWCS with re-configurable rectifier. The BWCS can implement smooth switching between series-series (SS) circuit with natural load-independent CCO and series/inductor-capacitor-capacitor (S/LCC) circuit with load-independent CVO by controlling the MOSFETs in the rectifier. The BWCS works at a fixed frequency with a few components, eliminating the wireless link between the two sides, and simple control method. The operating principle of the presented BWCS is described in detail, and a 250V/4A experimental platform is set up to validate the good performance of the presented BWCS.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wang, Y., Liu, H., Yu, H., Wheeler, P.: A battery wireless charger with full load range soft-switching operation and zero-switching-loss inverter. IEEE Trans. Indu. Electr. https://doi.org/10.1109/TIE.2023.3306411, to be published.
Liu, H., Wang, Y., Yu, H., Wu, F., Wheeler, P.: A novel three-phase omnidirectional wireless power transfer system with zero-switching-loss inverter and cylindrical transmitter coil. IEEE Trans. Power Electron. 38(8), 10426–10441 (2023)
RamRakhyani, A.K., Mirabbasi, S., Chiao, M.: Design and optimization of resonance-based efficient wireless power delivery systems for biomedical implants. IEEE Trans. Biomed. Circuits Syst. 5(1), 48–63 (2011)
Mai, J., Wang, Y., Yao, Y., Sun, M., Xu, D.: High-Misalignment -Tolerant IPT Systems With Solenoid and Double D Pads. IEEE Trans. Industr. Electron. 69(4), 3527–3535 (2022)
Wang, Y., et al.: A misalignment-tolerant hybrid coupler for electric vehicle IPT charging systems. IEEE Transactions on Vehicular Technology. https://doi.org/10.1109/TVT.2023.3277834, to be published
Li, H., Li, J., Wang, K., Chen, W., Yang, X.: A maximum efficiency point tracking control scheme for wireless power transfer systems using magnetic resonant coupling. IEEE Trans. Power Electron. 30(7), 3998–4008 (2015)
Li, H.Z., Zhu, C., Jiang, J., Song, K., Wei, G.: A 3-kW wireless power transfer system for sightseeing car supercapacitor charge. IEEE Trans. Power Electron. 32(5), 3301–3316 (2017)
Qu, X., Chu, H., Wong, S., Tse, C.K.: An IPT battery charger with near unity power factor and load-independent constant output combating design constraints of input voltage and transformer parameters. IEEE Trans. Power Electron. 34(8), 7719–7727 (2019)
Wang, Y., Liu, H., Yu, H., Wheeler, P., Zhou, Q., Zhao, S.: A hybrid battery wireless charger for self-adapting battery charging curve and anti-misalignment. IEEE J. Emerg. Select. Topi. Indu. Electron. 4(4), 1192–1203 (2023)
Wang, D., Qu, X., Yao, Y., Yang, P.: Hybrid inductive-power-transfer battery chargers for electric vehicle onboard charging with configurable charging profile. IEEE Trans. Intell. Transp. Syst. 22(1), 592–599 (2021)
Chen, Y., Yang, B., Kou, Z., He, Z., Cao, G., Mai, R.: Hybrid and reconfigurable IPT systems with high-misalignment tolerance for constant-current and constant-voltage battery charging. IEEE Trans. Power Electron. 33(10), 8259–8269 (2018)
Wang, Y., Liu, H., Wu, F., Wheeler, P., Zhou, Q., Zhao, S.: Research on a three-coil hybrid IPT charger with improved tolerance to coupling variation and load-independent output. IEEE J. Emerg. Select. Topi. Indu. Electron. 4(2), 625–636 (2023)
Zhang, Y., Shen, Z., Pan, W., Wang, H., Wu, Y., Mao, X.: Constant current and constant voltage charging of wireless power transfer system based on three-coil structure. IEEE Trans. Industr. Electron. 70(1), 1066–1070 (2023)
Zhang, Y., et al.: Misalignment-tolerant dual-transmitter electric vehicle wireless charging system with reconfigurable topologies. IEEE Trans. Power Electron. 37(8), 8816–8819 (2022)
Wang, Y., Liu, H., Yu, H., Wheeler, P., Wu, F.: An efficient soft-switching wireless battery charger with low-loss auxiliary circuit. IEEE Trans. Transportat. Electrifi. https://doi.org/10.1109/TTE.2023.3295794, to be published.
Wang, X., Xu, J., Ma, H., Zhang, Y.: A reconstructed S-LCC topology with dual-type outputs for inductive power transfer systems. IEEE Trans. Power Electron. 35(12), 12606–12611 (2020)
Wang, Y., Liu, H., Wheeler, P., Wu, F.: Implementation and analysis of an efficient soft switching battery wireless charger with re-configurable rectifier. IEEE Trans. Indu. Electron. 71(5), 4640–4651 (2024)
Acknowledgments
This work is supported by the National Key R&D Plan Project (Sub-project) under Grant 2018YFE0309102.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 Beijing Paike Culture Commu. Co., Ltd.
About this paper
Cite this paper
Wang, Y., Liu, H., Yu, H., Wang, S., Wang, S. (2024). An Efficient and Simple Battery Wireless Charging System with Re-configurable Rectifier. In: Cai, C., Qu, X., Mai, R., Zhang, P., Chai, W., Wu, S. (eds) The Proceedings of 2023 International Conference on Wireless Power Transfer (ICWPT2023). ICWPT 2023. Lecture Notes in Electrical Engineering, vol 1158. Springer, Singapore. https://doi.org/10.1007/978-981-97-0873-4_10
Download citation
DOI: https://doi.org/10.1007/978-981-97-0873-4_10
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-97-0872-7
Online ISBN: 978-981-97-0873-4
eBook Packages: EngineeringEngineering (R0)