Abstract
In consideration of total hip replacement (THR) and theoretical life estimation, we extensively performed finite element analysis and predicted the wear behaviour of different head sizes of 28, 30 and 32 mm and two bearing systems namely ZTA head—ZTA liner and Ti6Al4V head—UHMWPE liner. Static but stance activity was encountered for the 100 kg subject, where the ZTA head—ZTA liner combination exhibit less von mises stress compared to Ti6Al4V head—UHMWPE liner bearing. Interestingly, 30 mm femoral head experiences more jump distance (JD) and more range of motion (ROM) in comparison of the 28 mm femoral head, and less deformation compares to 32 mm femoral head. The wear behaviour is estimated using Archard’s law and predicted wear depth is around 600 µm for 15 years for 30 mm femoral head during articulating motion with identical tribocouple.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sariali E, Leonard P, Mamoudy P (2008) Dislocation after total hip arthroplasty using Hueter anterior approach. J Arthroplasty 23(2):266–272
Alberton GM, High WA, Morrey BF (2002) Dislocation after revision total hip arthroplasty: an analysis of risk factors and treatment options. J Bone Joint Surg Am 84(10):1788–1792
Askari Ehsan, Flores Paulo, Dabirrahmani Danè, Appleyard Richard (2016) A review of squeaking in ceramic total hip prostheses. Tribol Int 93:239–256
Bergmann G, Bender A, Dymke J, Duda G, Damm P (2016) Standardized loads acting in hip implants. PLoS ONE 11(5):e0155612
Bergen H (2010) Annual Report 2010, Norwegian Arthroplasty Register. Norwegian Arthroplasty Register
David D, Graves S, Tomkins A (2013) Anual Report 2013 Australien Orthopaedic Association National Joint Replacement Registry
Garellick G, Karrholm J, Rogmark C, Rolfson O, Herberts P (2011) Annual Report 2011. Swedish Hip Arthroplasty Register
Tsouknidas Alexander, Anagnostidis Kleovoulos, Maliaris Georgios, Michailidis Nikolaos (2012) Fracture risk in the femoral hip region: a finite element analysis supported experimental approach. J Biomech 45:1959–1964
Bergmann G, Deuretzbacher G, Heller M, Graichen F, Rohlmann A, Strauss J, Duda GN (2001) Hip contact forces and gait patterns from routine activities. J Biomech 34:639–642
Fialho JC, Fernandes PR, Eca L, Folgado J (2007) Computational hip joint simulator for wear and heat generation. J Biomech 40:2358–2366
Rancourt D, Shirazi-Adl A, Drouin G et al (1990) Friction properties of the interface between porous-surfaced metals and tibial cancellous bone. J Biomed Mater Res 24:1503–1519
Khademhosseini A (2008) Micro and nanoengineering of the cell microenvironment: technologies and applications. Artech House Publishers
Park J (2008) Bioceramics: properties, characterizations, and applications. Springer
Wu JS, Hung J, Shu C, Chen J (2003) The computer simulation of wear behavior appearing in total hip prosthesis. Comput Methods Program Biomed 70:81–91
Strey NF, Scandian C (2017) Tribological transitions during sliding of zirconia against alumina and ZTA in water. Wear 376–377:343–351
Shaik AB, Sarkar D (2019) Dynamic analysis and life estimation of the artificial hip joint prosthesis. In: Advances in Intelligent Systems and Computing, vol 949, Springer, pp 265–274
Acknowledgements
The current research project is financially supported by the Department of Biotechnology (DBT), Government of India (GOI) (Grant No. BT/PR13466/COE/34/26/2015).
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Basha, S.A., Sarkar, D. (2020). Finite Element Analysis and Theoretical Wear Behaviour for Total Hip Replacement. In: Vijayaraghavan, L., Reddy, K., Jameel Basha, S. (eds) Emerging Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9931-3_10
Download citation
DOI: https://doi.org/10.1007/978-981-32-9931-3_10
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9930-6
Online ISBN: 978-981-32-9931-3
eBook Packages: EngineeringEngineering (R0)