Abstract
The influence of air supply mode, input air amount and embedding heat pipes on air cooling plate heat transfer characteristics was investigated by using CFD techniques. An air cooling plate embedded with heat pipes was manufactured and experiments were done in order to validate simulation conclusions. Both the simulation and experimental results indicate that the temperature uniformity of the crossing flow plate is apparently improved compared with that of syntropic flow plate, which is 4–8 ℃ and 20–30 ℃, respectively. Moreover, the maximum temperature and temperature uniformity are both improved with the increase of air supply velocity and embedding with heat pipes. This study is referential for thermal design of air cooling electron equipment.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Sahu, V., Joshi, Y., Fedorov, A.: Hybrid solid state/fluidic cooling for hot spot removal. Nanoscale Microscale Thermophys. Eng. 13, 135–150 (2009)
Lee, T.Y.: Design optimization of an integrated liquid-cooled IGBT power module using CFD technique. IEEE Trans. Compon. Packag. Technol. 23(1), 55–60 (2000)
Garimella, S.V., Fleischer, A.S., Murthy, J.Y., et al.: Thermal challenges in next-generation electronic systems. Compon. Packag. Technol. 31(4), 801–815 (2008)
Schuh, P., Sledzik, H., Reber, R., et al.: T/R-Module technologies today and future trends. In: 2010 European Microwave Conference, pp. 1540–1543. IEEE (2010)
Baranyuk, A.V., Nikolaenko, Y.E., Rohachov, V.A., Terekh, A.M., Krukovskiy, P.G.: Investigation of the flow structure and heat transfer intensity of surfaces with split plate finning. Therm. Sci. Eng. Progress 11, 28–39 (2019)
Filippeschi, S.: Comparison between miniature periodic two-phase thermosyphons and miniature LHP applied to electronic cooling equipment. Appl. Therm. Eng. 31(5), 795–802 (2011)
Vasiliev, L.L.: Micro and miniature heat pipes-electronic component coolers. Appl. Therm. Eng. 28(4), 266–273 (2008)
Chen, Y.S., Chien, K.H., Wang, C.C.: Investigations of the thermal spreading effects of rectangular conduction plates and vapor chamber. J. Electron. Packag. 129(3), 348–355 (2007)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Science Press
About this paper
Cite this paper
Xu, J., Qian, J. (2020). Research on Heat Transfer Characteristics of Air Cooling Plate Embedded with Heat Pipes. In: Duan , B., Umeda, K., Hwang, W. (eds) Proceedings of the Seventh Asia International Symposium on Mechatronics. Lecture Notes in Electrical Engineering, vol 589. Springer, Singapore. https://doi.org/10.1007/978-981-32-9441-7_52
Download citation
DOI: https://doi.org/10.1007/978-981-32-9441-7_52
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9440-0
Online ISBN: 978-981-32-9441-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)