Abstract
The new technologies of energy saving and emission reduction is a greatest challenge to the industries. Increase in environmental pollution and energy demand requires clean source of energy. Thermoelectric power generation is the best solution for the clean source of energy. Thermoelectric power generation through waste heat recovery includes vehicle exhaust waste, industrial waste. In order to utilize the waste heat, the efficient TEG should be used which requires (i) TEG materials with less cost to improve its performance, (ii) TEG materials with improved ZT values, (iii) TEG material to work with high temperature difference. This review begins with the principle of thermoelectric generator, power calculation, present and future thermo electric materials, application of TEG in various sectors
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chen W-H, Wang C-C, Hung C-I, Yang C-C, Juang R-C (2014) Modelling and simulation for the design of thermal-concentrated solar thermoelectric generator. Energy 64:287–297 (2014)
Liang X, Sun X, Shu G, Sun K, Wang X, Wang X (2013) Using the analytic network process (ANP) to determine method of waste energy recovery from engine. Energy Convers Manage 66:304–311
Riffat SB, Ma X (2003) Thermoelectrics: a review of present and potential applications. Appl Therm Eng 23(8):913–935
Bhandari CM, Rowe DM (1983) Modern thermoelectrics. Reston Publishing Company, Virginia
LeBlanc S (2014) Thermoelectric generators: linking material properties and systems engineering for waste heat recovery applications. Sustain Mater Technolog 1:26–35
Aswal DK, Basu R, Singh A (2016) Key issues in development of thermoelectric power generators: high figure-of-merit materials and their highly conducting interfaces with metallic interconnects. Energy Convers Manage 114:50–67
Huesgen T, Woias P, Kockmann N (2008) Design and fabrication of MEMS thermoelectric generators with high temperature efficiency: Sens Actuators Phys 145:423–429
BNEF (2007) Electric vehicle outlook 2017. Bloomberg finance, Tech Rep pp 1–5
Muralidhar N, Himabindu M, Ravikrishna (2018) Modelling of a hybrid electric heavy duty vehicle to assess energy recovery using a thermoelectric generator. Energy 148:1046–1059
Khan AU, Kobayashi K, Tang D-M, Yamauchi Y, Hasegawa K, Mitome M, Xue Y et al (2017) Nano-micro-porous skutterudites with 100% enhancement in ZT for high performance thermoelectricity. Nano Energy 31:152–159
Ritz F, Peterson CE (2004) Multi-mission radioisotope thermoelectric generator (MMRTG) program overview. In: 2004 IEEE aerospace conference proceedings (IEEE Cat. No. 04TH8720), vol 5. IEEE, pp 2950–2957
Hazan E, Ben-Yehuda O, Madar N, Gelbstein Y (2015) Functional graded germanium-lead chalcogenide-based thermoelectric module for renewable energy applications. Adv Energy Mater 5(11):1500272
Appel O, Zaharoni T, Breuer G, Beeri O, Gelbstein Y (2019) Thermoelectric properties of Ti0. 3Zr0. 35Hf0. 35Ni1. 005Sn half-Heusler alloy. J Appl Phys 126(8):085110
Selvan KV, Hasan MN, Mohamed Ali MS (2019) Methodological reviews and analyses on the emerging research trends and progresses of thermoelectric generators. Int J Energy Res 43(1):113–140
Strasser M, Aigner R, Lauterbach C, Sturm TF, Franosch M, Wachutka G (2004) Micromachined CMOS thermoelectric generators as on-chip power supply. Sens Actuators A: Physi 114(2–3):362–370
Brand O, Fedder GK, Hierold C, Korvink JG, Tabata O (2015) Micro-and nanomanipulation tools. Wiley
TEG-HH-15_module_spec_sheet n.d. https://www.evidentthermo.com/ [Accessed 6 June 2016]
TEG-HH-8_module_spec_sheet n.d https://www.evidentthermo.com/ [Accessed 6 June 2016]
MODULE TEG1-PB-12611–6.0 spec sheet n.d. https://tecteg.com/wp-content/uploads/2015/01/TEG1-PB-12611-6.0_CBH-1-Final-November-17th-update.pdf [Accessed 9 Feb 2015]
tEcteg cmo-oxide-cmo-cascade-thermoelectric-power-modulesn.d. https://tecteg.com/cmo-oxide-cmo-cascade-800c-hot-side-thermoelectric-power-modules/ [Accessed 6 June 2016
Hotblock Onboard n.d. www.onboardfr/ [Accessed 6 June 2016]
Champier D (2017) Thermoelectric generators: a review of applications. Energy Convers Manage 140:167–181
Zhang Q, Sun Y, Wei Xu, Zhu D (2014) Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently. Adv Mater 26(40):6829–6851
Lay-Ekuakille, A, Vendramin G, Trotta A, Mazzotta G (2009) Thermoelectric generator design based on power from body heat for biomedical autonomous devices. In: 2009 IEEE international workshop on medical measurements and applications. IEEE, pp 1–.
Greatbatch W, Bustard TS (1973) A Pu 238 O 2 nuclear power source for implantable cardiac pacemakers. IEEE Trans Biomed Eng 5:332–336
Baert, K, Gyselinckx B, Torfs T, Leonov V, Yazicioglu F, Brebels S, Donnay S, Vanfleteren J, Beyne E, Van Hoof C (2006) Technologies for highly miniaturized autonomous sensor networks. Microelectron. J. 37(12):1563–1568
Latré B, Braem B, Moerman I, Blondia C, Demeester P (2011) A survey on wireless body area networks. Wireless Netw 17(1):1–18
Leonov, V, Fiorini P, Vullers RJM (2011) Theory and simulation of a thermally matched micromachined thermopile in a wearable energy harvester. Microelectron J 42(4):579–584
Abelson RD (2006) Space missions and applications. In: Rowe DM (ed) Thermoelectrics handbook macro to nano. CRC Press, Taylor & Francis Group, Boca Raton, FL, USA, pp 56–156–26. ISBN 0-8493-2264-2
Fleurial JP, Caillat T, Nesmith BJ, Ewell RC, Woerner DF, Carr GC, JonesJet LE (2011) Thermoelectrics: from space power systems to terrestrial waste heat recovery applications. In: Proceedings of the Thermoelectrics Applications Workshop, vol 30, San Diego, CA, USA
Enescu D (2019) Thermoelectric energy harvesting: basic principles and applications. In Green Energy Adv, IntechOpen
Li D (ed) (2008) Encyclopedia of microfluidics and nanofluidics. Springer Science & Business Media
Yang Y, Lin Z-H, Hou T, Zhang F, Wang ZL (2012) Nanowire-composite based flexible thermoelectric nanogenerators and self-powered temperature sensors. Nano Res 5(12):888–895
Kim S, Park S, Kim S, Rhi S-H (2011) A thermoelectric generator using engine coolant for light-duty internal combustion engine-powered vehicles. J Electron Mater 40(5):812
Nuwayhid RY, Rowe DM, Min G (2003) Low cost stove-top thermoelectric generator for regions with unreliable electricity supply. Renew Energy 28(2):205–222
Nuwayhid Rida Y, Shihadeh A, Ghaddar N (2005) Development and testing of a domestic woodstove thermoelectric generator with natural convection cooling. Energy Convers Manage 46(9–10):1631–1643
Yu S, Du Q, Diao H, Shu G, Jiao K (2015) Start-up modes of thermoelectric generator based on vehicle exhaust waste heat recovery. Appl energy 138:276–290
Biswas K, He J, Blum ID, Wu C-I, Hogan TP, Seidman DN, Dravid VP, Kanatzidis MG (2012) High-performance bulk thermoelectrics with all-scale hierarchical architectures. Nature 489(7416):414
Fu C, Bai S, Liu Y, Tang Y, Chen L, Zhao X, Zhu T (2015) Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials. Nature Commun 6:8144
Thomson H, Liddell C (2015) The suitability of wood pellet heating for domestic households: a review of literature. Renew Sustain Energy Rev 42:1362–1369
Moser W, Friedl G, Haslinger W, Hofbauer H (2006) Small-scale pellet boiler with thermoelectric generator. In: 2006 25th international conference on thermoelectrics. IEEE, pp 349–353
Baranowski LL, Snyder GJ, Toberer ES Concentrated solar thermoelectric generators. Energy Environ. Sci 5(10):9055–9067 (2012)
Olsen ML, Warren EL, Parilla PA, Toberer ES, Kennedy CE, Snyder GJ, Firdosy SA et al (2014) A high-temperature, high-efficiency solar thermoelectric generator prototype. Energy Procedia 49:1460–1469
Kraemer D, McEnaney K, Chiesa M, Chen G (2012) Modeling and optimization of solar thermoelectric generators for terrestrial applications. Solar Energy 86(5):1338–1350
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Lourdu Jame, S., Joselin Retna Kumar, G. (2021). A Comprehensive Review on Thermoelectric Generator for Energy Harvesting. In: Komanapalli, V.L.N., Sivakumaran, N., Hampannavar, S. (eds) Advances in Automation, Signal Processing, Instrumentation, and Control. i-CASIC 2020. Lecture Notes in Electrical Engineering, vol 700. Springer, Singapore. https://doi.org/10.1007/978-981-15-8221-9_176
Download citation
DOI: https://doi.org/10.1007/978-981-15-8221-9_176
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8220-2
Online ISBN: 978-981-15-8221-9
eBook Packages: EngineeringEngineering (R0)