Abstract
The objective of the article is the discussion the different behaviors of several concrete types based on the DIC method. The three various concrete mixes were tested. They include two ordinary Portland cemented concrete mixtures having difference concrete grades and another concrete in which the steel slag replaced for coarse aggregate. During the beam-bending test, strain contour plots on the surface of reinforcement concrete beams and the crack development were captured of the digital image correlation (DIC) technique. The DIC method was verified by comparing the actual strain measured from the strain gauge and that determined from DIC. The results show the feasibility of using this method for present the strain contour plots of the reinforcement concrete beams. The crack development in various mixtures of concrete was compared and discussed within the article.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adhikari RS, Moselhi O, Bagchi A (2014) Image-based retrieval of concrete crack properties for bridge inspection. Autom Constr 39:180–194
Bazant ZP (1998) Fracture and size effect in concrete and other quasi-brittle materials. CRC Press LLC, Boca Raton
Blaber J, Adair B, Antoniou A (2015) Ncorr: open-source 2D digital image correlation matlab software. Exp Mech 55(6):1105–1122
Bornert M, Brémand F, Doumalin P, Dupré JC, Fazzini M, Grédiac M, Hild F, Mistou S, Molimard J, Orteu JJ, Robert L (2009) Assessment of digital image correlation measurement errors: methodology and results. Exp Mech 49:353–370
Chu TC, Ranson WF, Sutton MA (1985) Application of digital-image-correlation techniques to experimental mechanics. Exp Mech 25(3):232–244
Huang Y, Xu B (2006) Automatic inspection of pavement cracking distress. J Electron Imaging 15(1):013017
Kozicki J, Tejchman J (2013) Application of DIC technique to concrete—study on objectivity of measured surface displacements. Experimental Mechanics 53(9): 1545–1559
Pan B (2018) Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals. Meas Sci Technol 29(8):082001
Shih MH, Sung WP (2013) Application of digital image correlation method for analysing crack variation of reinforced concrete beams. Sadhana 38(4):723–741
Valença J, Dias-da-Costa D, Júlio ENBS (2012) Characterisation of concrete cracking during laboratorial tests using image processing. Constr Build Mater 28(1):607–615
Yamaguchi T, Nakamura S, Saegusa R, Hashimoto S (2008) Image-based crack detection for real concrete surfaces. IEEJ Trans Electr Electron Eng 3(1):128–135
Acknowledgements
The authors are grateful for the financial support as well as the experimental equipment of the HCM University of Technology and Education.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Le, A.T., Tai Nguyen, H.T., Hung, N.T., Le, Q.D. (2020). A Study on Strain Contour Plots and Crack Development for Reinforcement Concrete Beams Based on the Application of DIC Technique. In: Reddy, J., Wang, C., Luong, V., Le, A. (eds) ICSCEA 2019. Lecture Notes in Civil Engineering, vol 80. Springer, Singapore. https://doi.org/10.1007/978-981-15-5144-4_17
Download citation
DOI: https://doi.org/10.1007/978-981-15-5144-4_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5143-7
Online ISBN: 978-981-15-5144-4
eBook Packages: EngineeringEngineering (R0)