Abstract
In Japan, the energy source for power generation depends mostly on foreign countries. Therefore, it is necessary to secure stable energy resources in our country. Wave energy has a very large amount of energy (Masuda 2008, Hiromichi et al. 2016, Tanaka et al., 2016). In this research, thermal fluid analysis software was used to numerical calculations to reproduce the hydraulic characteristics, the breaking wave and the overtopping wave. For wave power generation, there is an advantage that resources that are semi-permanent waves can be used. The structure of the overtopping wave power generator was mainly wall type and no-wall type under wave run-up slope area. At first this research, we summarize the types and characteristics of power generation methods using ocean energy. At second we focused on the extraction of unused wave energy and the overtopping wave power generation which can be effectively utilized. Numerical analysis of regulated waves was carried out to reproduce the hydraulic characteristics such as the behavior of the run-up, the catchment and the breaking wave and the transverse wave in the local quantity by using the thermo-fluid analysis software. Then the results of the breaking wave, the transient phenomenon for various wave conditions reproduction, and overflow wave flow rate were calculated. The overtopping flow rate and water storage rate were very important factors in such systems. Numerical calculation of regular waves on the influence of shape difference on overtopping flow rate and water storage rate were carried out. At third, to simulate actual sea conditions irregular waves were made for calculation. These results were compared with calculations of regular waves. At final, numerical calculation using regular waves and irregular waves showed that the influence of the difference in the shape of the structure on the maximum water overtopping storage rate. It was necessary to devise a structure that can be efficiently overtopped by irregular waves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Hiromichi TANAKA, Masato MINAMI, Tomoya INAMI and Tetsuo SAKURADA, 2016. Researches and Developments of Wave Overtop-ping Type Wave Power Generation, Proceedings of the Twenty-sixth (2016) International Ocean and Polar Engineering Conference, p.642-648, Rhodes, Greece, June 26 - July 1, 2016.
Masuda Y., 2008. The wave power generation in Japan. Kasumi publishing company. NATURE DI-GEST (Japanese ed.), To catch a wave, Vol.5, No.1, pp. 12-17.
Minami M., 2015. NUMERICAL ANALYSIS OF OVER TOPPING-TYPE WAVE POWER GENERATION EQUIPMENT. Vietnam-Japan Workshop on Estuaries, Coasts and River 2015, Session 4, p. 2-7, September, CKT, Hoi An, Vietnam.
Minami M. & Tanaka H., 2015. 3-D Numerical Analysis of Overtopping-type Wave Power Generation Equipment. Proceedings of the Twenty-fifth (2015) International Ocean and Polar Engineering Conference, p.918-923, Kona, Big island, Hawaii, USA, June 21-26.
Minami M., Shimoyama Y., Miyamoto K. & Koyahata S., 2016. CHARACTERISTICS OF OVERTOP-PING VOLUME FOR DEVELOPPING WAVE OVER TOPPPING MULTISTAGE TYPE WAVE POWER GENERATE EQUIPMENT. Vietnam-Japan Workshop on Estuaries, Coasts and River 2016, Session 1 COAST AND ESTUARY, p.133-141, September 2016, Ho Chi Mink City, Vietnam.
Tanaka H., Yodokawa M. and Suzuki A., 2010. Studies on the wave run-up height for the development of wave overtopping type power generation, JSCE, Proceedings of Coastal Engineering, Vol.66, pp.1271-1275.
Tanaka H., Yodokawa M., Nikawadori N. & Yama-nashi O., 2012. Development of Wave Overtop-ping Type Wave Power Generation Devices, Pro-ceding of the Twenty-second International Off-shore and Polar Engineering Conference, Greece.
Tanaka H., Minami M., Inami T. & Sakurada T. 2016. Researches and Developments of Wave Overtop-ping Type Wave Power Generation, Proceedings of the Twenty-sixth (2016) International Ocean and Polar Engineering Conference, p.642-648, Rhodes, Greece.
Tomoki Takahashi & Masato Minami, 2018. The application of numerical simulation to overtopping type wave generator equipment, Proceedings of the 3rd international conference on renewable energies offshore (RENEW2018), Lisbon, Portugal, p.495-501, 2018.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Imaizumi, N., Takahasi, T., Tanaka, H., Minami, M. (2020). Numerical Analysis of the Water Level Change on the Overtopping Wave Power Generator. In: Trung Viet, N., Xiping, D., Thanh Tung, T. (eds) APAC 2019. APAC 2019. Springer, Singapore. https://doi.org/10.1007/978-981-15-0291-0_154
Download citation
DOI: https://doi.org/10.1007/978-981-15-0291-0_154
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0290-3
Online ISBN: 978-981-15-0291-0
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)