Skip to main content
SpringerLink
Log in

Effect of Flow Regime on Total Interfacial Area of Two Immiscible Fluids in Microchannel Reactor Using VOF Model

  • Conference paper
  • First Online:
Advances in Material Sciences and Engineering

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Abstract

The application of microfluidic in chemical processing, for example, the microchannel reactor has received much attention. This type of reactor can enhance the reaction efficiency due to high total interfacial area for the interaction of reactants in a multiphase reaction. The behavior of multiphase flow can create several different types of regimes such as segmented, annular, or droplet flow, depending on the flow conditions between the two immiscible liquids. The droplet flow has relatively higher total interfacial area than the annular flow. Depending on the total volumetric flow rate and volumetric ratio, the size of the microdroplet can be varied. In this study, the size of the microdroplet is investigated by varying the volumetric ratio of oil-to-methanol, O/M, and the total volumetric flowrate, QTotal. Computational fluid dynamics (CFD) method using Volume of Fluid (VOF) model is implemented to predict the size of the microdroplet produced in the microchannel reactor. In addition, the model is first validated with the experimental data which showed good agreement between numerical and experimental results. It was found that the droplet size is decreasing as the total volumetric flow rate and oil-to-methanol ratio increases, which will increase the total interfacial area. In addition, droplet regime has the highest total interfacial area, while segmented regime has the lowest total interfacial area. This finding is useful especially in designing a microreactor that controls the size of droplet and maximizes the total interfacial area, overall enhancing the reaction process.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Huebner A, Sharma S, Srisa-Art M, Hollfelder F, Edel JB, DeMello AJ (2008) Microdroplets: a sea of applications? Lab Chip 8:1244

    Article  Google Scholar 

  2. Antony R, Nandagopal MSG, Sreekumar N, Rangabhashiyam S, Selvaraju N (2014) Liquid-liquid slug flow in a microchannel reactor and its mass transfer properties—a review. Bull Chem React Eng Catal 9

    Google Scholar 

  3. Srinivasan R, Hsing I-M, Berger PE, Jensen KF, Firebaugh SL, Schmidt MA, Harold MP, Lerou JJ, Ryley JF (1997) Micromachined reactors for catalytic partial oxidation reactions. AIChE J 43:3059–3069

    Article  Google Scholar 

  4. Azam NAM, Uemura Y, Kusakabe K, Bustam MA (2016) Biodiesel production from palm oil using micro tube reactors: effects of catalyst concentration and residence time. Procedia Eng 148:354–360

    Article  Google Scholar 

  5. Jamil MF, Uemura Y, Kusakabe K, Ayodele OB, Osman N, Majid NMNA, Yusup S (2016) Transesterification of mixture of castor oil and sunflower oil in millichannel reactor: FAME yield and flow behaviour. Procedia Eng 148:378–384

    Article  Google Scholar 

  6. Santana HS, Tortola DS, Reis ÉM, Silva JL, Taranto OP (2016) Transesterification reaction of sunflower oil and ethanol for biodiesel synthesis in microchannel reactor: experimental and simulation studies. Chem Eng J 302:752–762

    Article  Google Scholar 

  7. Pontes PC, Chen K, Naveira-Cotta CP, Costa Junior JM, Tostado CP, Quaresma JNN (2016) Mass transfer simulation of biodiesel synthesis in microreactors. Comput Chem Eng 93:36–51

    Article  Google Scholar 

  8. Xie T, Zhang L, Xu N (2012) Biodiesel synthesis in microreactors. Green Process Synth 1

    Google Scholar 

  9. Rashid WNWA, Uemura Y, Kusakabe K, Osman NB, Abdullah B (2014) Synthesis of biodiesel from palm oil in capillary millichannel reactor: effect of temperature, methanol to oil molar ratio, and KOH concentration on FAME yield. Procedia Chem. 9:165–171

    Article  Google Scholar 

  10. Aghel B, Rahimi M, Sepahvand A, Alitabar M, Ghasempour HR (2014) Using a wire coil insert for biodiesel production enhancement in a microreactor. Energy Convers Manag 84:541–549

    Article  Google Scholar 

  11. Rahimi M, Aghel B, Alitabar M, Sepahvand A, Ghasempour HR (2014) Optimization of biodiesel production from soybean oil in a microreactor. Energy Convers Manag 79:599–605

    Article  Google Scholar 

  12. Csernica SN, Hsu JT (2012) The phase behavior effect on the kinetics of transesterification reactions for biodiesel production. Ind Eng Chem Res 51:6340–6349

    Article  Google Scholar 

  13. Santana HS, Silva JL, Taranto OP (2015) Numerical simulation of mixing and reaction of Jatropha curcas oil and ethanol for synthesis of biodiesel in micromixers. Chem Eng Sci 132:159–168

    Article  Google Scholar 

  14. Rashid WNWA, Uemura Y, Kusakabe K, Osman NB, Abdullah B (2013) Transesterification of palm oil in a millichannel reactor. J Japan Inst Energy 92:905–908

    Article  Google Scholar 

  15. López-Guajardo E, Ortiz-Nadal E, Montesinos-Castellanos A, Nigam KDP (2017) Process intensification of biodiesel production using a tubular micro-reactor (TMR): experimental and numerical assessment. Chem Eng Commun 204:467–475

    Article  Google Scholar 

  16. Kurup GK, Basu AS (2012) Field-free particle focusing in microfluidic plugs. Biomicrofluidics 6:022008

    Article  Google Scholar 

  17. Di Miceli Raimondi N, Prat L, Gourdon C, Cognet P (2008) Direct numerical simulations of mass transfer in square microchannels for liquid–liquid slug flow. Chem Eng Sci 63:5522–5530

    Article  Google Scholar 

  18. Lim C, Koh K, Ren Y, Chin J, Shi Y, Yan Y (2017) Analysis of liquid-liquid droplets fission and encapsulation in single/two layer microfluidic devices fabricated by xurographic method. Micromachines 8:49

    Article  Google Scholar 

  19. Laziz AM, Shaari KZK (2017) CFD simulation of two phase segmented flow in microchannel reactor using volume of fluid model for biodiesel production. Presented at the (2017)

    Google Scholar 

  20. ANSYS Inc.: Fluent 15.0 Theory guide. Canonsburg, PA (2011)

    Google Scholar 

  21. Brackbill JU, Kothe DB, Zemach C (1992) A continuum method for modeling surface tension. J Comput Phys 100:335–354

    Article  MathSciNet  Google Scholar 

  22. Santana HS, Tortola DS, Silva JL, Taranto OP (2017) Biodiesel synthesis in micromixer with static elements. Energy Convers Manag 141:28–39

    Article  Google Scholar 

  23. Santana HS, Amaral RL, Taranto OP (2015) Numerical study of mixing and reaction for biodiesel production in spiral microchannel. Chem Eng Trans 43

    Google Scholar 

  24. Garstecki P, Stone HA, Whitesides GM (2005) Mechanism for flow-rate controlled breakup in confined geometries: a route to monodisperse emulsions. Phys Rev Lett 94:164501

    Article  Google Scholar 

Download references

Acknowledgements

The authors would like to offer their gratitude to Universiti Teknologi PETRONAS, Malaysia for providing a conducive work environment and state-of-the-art research facilities.

Author information

Authors and Affiliations

  1. Chemical Engineering Department, Universiti Teknologi Petronas, 32610, Bandar, Seri Iskandar, Malaysia

    Afiq Mohd Laziz & Ku Zilati Ku Shaari

Authors
  1. Afiq Mohd Laziz
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ku Zilati Ku Shaari
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ku Zilati Ku Shaari .

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Perak, Malaysia

    Mokhtar Awang

  2. Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar, Perak, Malaysia

    Seyed Sattar Emamian

  3. Department of Mechanical Engineering, University of Malaya, Kuala Lumpur, Malaysia

    Farazila Yusof

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Laziz, A.M., Shaari, K.Z.K. (2020). Effect of Flow Regime on Total Interfacial Area of Two Immiscible Fluids in Microchannel Reactor Using VOF Model. In: Awang, M., Emamian, S., Yusof, F. (eds) Advances in Material Sciences and Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-8297-0_61

Download citation

  • DOI: https://doi.org/10.1007/978-981-13-8297-0_61

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-13-8296-3

  • Online ISBN: 978-981-13-8297-0

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation