Abstract
In the design of concrete structures, the criteria of strength and serviceability must be met. It is of equal importance that a structure be economical to construct and maintain. Current design codes require strength design, supplemented by checks for serviceability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
ACI Committee 318, “Building Code for Reinforced Concrete (ACI 318–89)”, American Concrete Institute, Detroit, 1989, 111 pp.
Bachmann, H., “Influence of Shear and Bond on Rotational Capacity of Reinforced Concrete Beams”, International Association for Bridge and Structural Engineering, Zurch, 1970, pp. 11–28.
CEB Model Code 1990 First Draft, CEB March 1990. Bulletin, d’information No. 195.
Cohn, M.Z., “Inelasticity of Reinforced Concrete and Structural Standards”, ASCE Journal of the Structural Division, Vol. 105, No. ST11, Nov. 1979, pp. 2221–2241.
Collins, M.P. and Mitchell, D, D., “Design Proposals for Shear and Torsion”, PCI Journal, Vol. 25, No. 5, Sept.-Oct. 1980.
CSA A23.3-M84, “Design of Concrete Structures for Buildings:, Canadian Standards Association, Rexdale, Ontario, 1984.
Dilger, W.H., “Veranderlichkeit der Biege - und Schubsteifigkeit bei Stahlbetontragwerken und ihr Einfluss auf Schnittkraft - Verteilung und Traglast bei statisch unbestimmter Lagerung”, Deutscher Ausschuss Fur Stahlbeton, Bulletin No. 179, Berlin, 1966. ( Change in Stiffness of Reinforced Concrete Structures and its influence on the Distribution of Internal Forces in Statically Indeterminate Structures).
Dilger, W.H., “Effect of Shear on the Rotational Capacity of Plastic Hinges of Reinforced Concrete Beams”, Colliquium on Limit Design of Structural Concrete, Waterloo, Canada, 1967.
DIN 1045–78, German Standard, 1978.
Hognestad, E., “A Study of Combined Bending and Axial Load in Reinforced Concrete Members”, University of Illinois Engineering Experimental Station, Bulletin Series No. 399, Nov. 1951, 128 pp.
Irrcher, K.K.J., “The Effective Flange Width of Prestressed Concrete T-Beams”, M.Eng. Thesis, University of Calgary, May 1983.
Park, R., and Paulay, T., “Reinforced Concrete Structures”, John Wiley and Sons, 1975, 765 p.
Rusch, H., and Stockl, S., “Einfluss von Bugeln und Druckstaben auf das Verhalten der Biegedruckzone von Stahlbetonbalken”. Deutscher Ausschuss fur Stahlbeton, Bulletin No. 148, Berlin, 1963.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1991 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Sveinson, T., Dilger, W.H. (1991). Moment Redistribution in Reinforced Concrete Structures. In: Grierson, D.E., Franchi, A., Riva, P. (eds) Progress in Structural Engineering. Solid Mechanics and Its Applications, vol 10. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-3616-7_4
Download citation
DOI: https://doi.org/10.1007/978-94-011-3616-7_4
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-5604-5
Online ISBN: 978-94-011-3616-7
eBook Packages: Springer Book Archive