Abstract
This article will describe an innovative way of implementing the automation of an injection molding machine using microcontroller which in turn will reduce total automation cost to only a few thousands rupees. In the piston side, toggle mechanism is used instead of direct drive to get extra mechanical advantage and safety features. The whole design is being simplified by cutting out some features which in turn reduce the total cost of the system without affecting its effectiveness. The system can be operated in two modes. In primary mode, the operator can easily operate through on-board keypad by entering only time sequences with the help of the manual. In the second one, it can be remotely controlled though a PC based application software.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Abraham, M., & Muthamizhselvi, M. (2013). Design and Implementation of can bus for distributed injection molding machine based on arm controller. International Journal of Computer Applications, 0975–8887.
Ahmed, S. F. (2007). A new approach in Industrial automation application “Embedded system design for Injection Molding Machine”. In IEEE Multitopic Conference. Lahore, Pakistan.
Becker, J. M. J., Hansen, H. N., Houten, F., & Tosello, G. (2013). Performance evaluation of a software engineering tool for automated design of cooling systems in injection molding. Proceedings of Forty Sixth CIRP Conference on Manufacturing Systems, 7, 270–275.
Bohatier, C., Cagnasso, F., Dubois, B., & Thomas, M. C. (1988). Knowledge base of components and connections for a CAD/CAM system. In 5th International Symposium on Robotics in Construction. Tokyo, Japan.
CAD/CAM based robot programming for milling & trimming by using robots in case study, Robotmaster. http://www.robotmaster.com/assets/data/pdf/success/armatecSurvivabilityOttobockHealthcare.pdf.
Cheng, C. C., Lee, W. C., Liu, T. K., Tseng, Y. T., & Zhao, Y. J. (2002). Flexible process control for injection molding machines using java technology. In American Control Conference. Anchorage, AK.
Frank, T., Heuser, B. V., Legat, C., & Schütz, D. (2014). Model-driven engineering of manufacturing automation software projects—A SysML-based approach. Mechatronics, 24, 883–897.
Hadzistevic, M., Hodolic, J., Matin, I., Tadic, B., & Vukelic, D. (2010). Development of CAD/CAE system for mold design. Journal of Production Engineering, 13(1).
Komathi, C., Saranya, M., Saranya, R., & Sreenidhi, R. (2014). Flexray rooted distributed intelligent governing of injection press. In 5th IRF International Conference, Chennai, India.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer India
About this paper
Cite this paper
Manna, S.K., Pradhan, S.K., Mandal, D.K. (2016). Design and Development of a Low Cost Automation Injection Molding Machine of 250 g Capacity Using Microcontroller. In: Mandal, D.K., Syan, C.S. (eds) CAD/CAM, Robotics and Factories of the Future. Lecture Notes in Mechanical Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2740-3_1
Download citation
DOI: https://doi.org/10.1007/978-81-322-2740-3_1
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2738-0
Online ISBN: 978-81-322-2740-3
eBook Packages: EngineeringEngineering (R0)