Abstract
Since antiquity, embroidery has been known as a familiar textile method for applying yarns to textile surfaces, mostly as decoration. There are many variations as to the manner and direction in which the yarn material is placed and how much of it is used. Owing to modern drive and calculation technology, embroidery machines offer nearly unlimited pattern variety at high productivity and reproducibility. One enhancement of embroidery technology is constituted by Tailored Fiber Placement (TFP). This technically fully developed method enables a targeted local reinforcement or functionalization of textile semi-finished products and the production of textile preforms with required reinforcement yarn arrangement for the manufacture of fiber composite components. This chapter provides an insight into the embroidery technology of technical textiles for fiber composite applications. It will deal with process-relevant parameters regarding mechanical properties and conveys an overview of two- and three-dimensionally embroidered semi-finished products. The potential of semi-finished products and preforms functionalized with embroidery technology will be illustrated by examples.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
EHRENSTEIN, G. W.: Faserverbund-Kunststoffe: Werkstoffe, Verarbeitung, Eigenschaften. München, Wien : Carl Hanser Verlag, 2006
GLIESCHE, K.; ROTHE, H.; FELTIN, D.: Technische Gesticke als kraftflußgerechte Textilkonstruktionen für Faserverbund-Bauteile. In: Konstruktion 48 (1996), pp. 114–118
WITT, G.: Taschenbuch der Fertigungstechnik. München, Wien : Carl Hanser Verlag, 2006
BÜHRING, L.; GRAWITTER, N.: Fachlexikon Stickerei und Spitze, CD, Deutsch/Englisch. Greiz : Textilforschungsinstitut Thüringen-Vogtland e.V., 2007
ELSNER, H.; REINHARDT, A.: Sensorintegration in Leichtbauverbundstrukturen mittels Sticktechnologie. In: Proceedings. Symposium Technische Textilien”Innovative Fügetechniken“. Reichenbach, Germany, 2008
CROTHERS, P. J.; DRECHSLER, K.; FELTIN, D.; HERSZBERG, I.; KRUCKENBERG, T.: Tailored fibre placement to minimise stress concentrations. In: Composites Part A: Applied Science and Manufacturing 28 (1997), No. 7, pp. 619–625. DOI 10.1016/S1359–835X(97)00022–5
FELTIN, D.: Entwicklung von textilen Halbzeugen für Faserverbunde unter Verwendung von Stickautomaten. Dresden, Technische Universität Dresden, Fakultät Maschinenwesen, Dissertation, 1998
GRAWITTER, N.; MÖHRING, U.; LABAHN, J.; MÜ LLER, M.; BERGER, W.: Ein neuer, strukturierter Rohrliner sorgt für Turbulenzen. In: Kettenwirk-Praxis 43 (2009), No. 2, pp. 20–21
MATTHEIJ, P.; GLIESCHE, K.; FELTIN, D.: Tailored Fibre Placement-Mechanical Properties and Applications. In: Journal of Reinforced Plastics and Composites 17 (1998), No. 9, pp. 774–786. DOI 10.1177/073168449801700901
HERSZBERG, I.; BANNISTER, M. K.; LEONG, K. H.; FALZON, P. J.: Research in Textile Composites at the Cooperative Research Centre for Advanced Composite Structures. In: The Journal of The Textile Institute 88 (1997), No. 3, pp. 52–73. DOI 10.1080/00405009708658587
MEYER, O.: Kurzfaser-Preform-Technologie zur kraftflussgerechten Herstellung von Faserverbundbauteilen. Stuttgart, Universität Stuttgart, Fakultät Luft- und Raumfahrttechnik und Geodäsie, Dissertation, 2008
FELTIN, D.; GLIESCHE, K.: Preforms for Composite Parts made by Tailored Fibre Placements. In: Proceedings. 11. International Conference on Composite Material. Gold Coast, Australia, 1997
http://www.zsk.de (06-08-2010)
http://www.tajima.de (06-08-2010)
Property right DE 102006021425 A1 (8th November 2007).
HAZRA, K.; POTTER, K.: Design of Carbon Fibre Composites Aircraft Parts Using Tow Steering Technique. In: Proceedings. SAMPE Europe 29th International Conference and Forum SEICO 08. Paris, France, 2008
UHLIG, K.; SPICKENHEUER, A.; GLIESCHE, K.; KARB, I.: Strength of CFRP open hole laminates made from NCF, TFP and braided preforms under cyclic tensile loading. In: Plastics, Rubber and Composites 39 (2010), No. 6, pp. 247–255. DOI 10.1179/174328910X12647080902772
MATTHEIJ, P.; GLIESCHE, K.; FELTIN, D.: 3D reinforced stitched carbon/epoxy laminates made by tailored fibre placement. In: Composites Part A: Applied Science and Manufacturing 31 (2000), No. 6, pp. 571–581. DOI 10.1016/S1359–835X(99)00096–2
GLIESCHE, K.; ORAWETZ, H.; HÜ BNER, T.: Application of the tailored fibre placements process for a local reinforcement on an open-hole tension plate from carbon/epoxy laminates. In: Composite Science and Technology 63 (2003), No. 1, pp. 81–88. DOI 10.1016/S0266–3538(02)00178–1
ASCHENBERGER, L.; TEMMEN, H.; DEGENHARDT, R.: Tailored Fibre Placements Technology - Optimisation and computation of CFRP structures. In: Proceedings. Advances in Design and Analysis of Composite Structures - ESAComp Users’ Meeting. Braunschweig, Germany, 2007
KRÄGER, L.; KLING, A.: Feedback Method transferring manufacturing data of TFP structures to as-build FE models. In: Proceedings. IV European Congress on Computational Mechanics. Paris, France, 2010
SCHIEBEL, P.: Ressourceneffiziente Fertigung hochbeanspruchter CFK Bauteile für den Fahrzeugbau. In: Proceedings. 3. Internationale Messe und Symposium für Technische Textilien im Fahrzeugbau. Chemnitz, Germany, 2010
GLIESCHE, K.; FELTIN, D.: Die Leichtigkeit des Seins. In: MM MaschinenMarkt, Das Industriemagazin (2002), No. 9, pp. 48–51
PRASSE, T.;MICHEL, F.;MOOK, G.; SCHULTE, K.; BAUHOFER,W.: A comparative investigation of electrical resistance and acoustic emission during cyclic loading of CFRP laminates. In: Composites Science and Technology 61 (2001), No. 6, pp. 831–835. DOI 10.1016/S0266–3538(00)00179–2
GLIESCHE, K.; ORAWETZ, H.; KUPKE, M.; WENTZEL, H. P.: Entwicklung eines Werkzeuges aus Faserverbunden mit gleichmäßiger Temperaturverteilung auf der Werkzeugoberfläche. In: GAK Gummi Fasern Kunststoffe 58 (2005), No. 3, pp. 167–173
KOHSER, C.: Innovative Heatable Composites Based on Carbon Fibre Structures. In: Railway Technology International (2010), No. 1, pp. 67–68
KUNADT, A.; STARKE, E.; PFEIFER, G.; CHERIF, Ch.: Messtechnische Eigenschaften von Dehnungssensoren aus Kohlenstoff-Filamentgarn in einem Verbundwerkstoff. In: tm- Technisches Messen 77 (2010), No. 6, pp. 113–120. DOI 10.1524/teme.2010.0014
KUNADT, A.; HEINIG, A.; STARKE, E.; PFEIFER, G.; CHERIF, Ch.; FISCHER, W. J.: Design and Properties of a Sensor Network embedded in thin fibre-reinforced Composites. In: Proceedings. IEEE Sensors 2010 Conference. Waikoloa, USA, 2010
CHERIF, Ch.; SCHADE, M.; HOFMANN, G.; FISCHER, W. J.; KUNADT, A.: Sustainability of the European Textile Industry Through Textile Based Lightweight Construction in Multimaterial Design with Function Integration: Visions and Chances. In: Proceedings. 9th World Textile Conference AUTEX 2010. Vilnius, Lithuania, 2010
ELSNER, H.: Sticktechnologie - Zukunftsbilder zu Möglichkeiten und Grenzen für technische Anwendungen in Kunststoffen. In: Proceedings. Fachtagung Technisches Sticken - zwischen Forschung und Markt. Plauen, Germany, 2010
GRIES, Th.: Grundlegende textilphysikalische Untersuchungen zur Konstruktion von dreidimensionalen gestickten Verbundwerkstoffen - 3D-Sticken (AiF-No. 15475 N) / Institut für Textiltechnik der RWTH Aachen. Aachen, 2010. – Research report
ORAWETZ, H.: Grundlagen und Anwendungen zur Tailored Fibre Placement Technologie. In: Luftfahrttechnisches Handbuch. LTH Koordinierungsstelle, 2007
HESSBERG, S.: Sticken mit Hochleistungsfaserwerkstoffen: Herstellung von 3-D-Gesticken randverstärkter Metallhohlkörper. In: Proceedings. Symposium Technische Textilien”Innovative Fügetechniken“. Reichenbach, Germany, 2008
Additional Literature
HERRMANN, A.S.; SCHIEBEL, P.: Analyse des Verformungsverhaltens von Kohlenstoff-Rovings im textilen Fertigungsprozess für belastungsgerechte CFK-Strukturen. In: Proceedings 13. Chemnitzer Textiltechnik Tagung, Chemnitz (2012)
HEß, H.; HIMMEL, N.: Structurally stitched NCF CFRP laminates. Part 2: Finite element unit cell based prediction of in-plane strength. In: Composites Science and Technology 71 (2011), pp. 569–585 http://www.laystitch.com (29.08.2014)
KARAMUK, E.; MAYER, J.; WINTERMANTEL, E.: Sticktechnologie für medizinische Textilien und Tissue Engineering. Medizintechnik – Life science engineering, 5th Edition, Springer Verlag Berlin Heidelberg, 2009. – ISBN 978-3-540-93935-1
KÄRGER, L.; KLING, A.: As-built FE-simulation of advanced fibre placement structures based on manufacturing data. In: Composite Structures 100 (2013), pp. 104 –112.
SELVARAJ, K.; SPICKENHEUER, A.; BITTRICH, L.; HEINRICH, G.: Bolted joints made of carbon fiber reinforced plastics using the tailored fiber placement technology: numerical and experimental failured analysis. In: Proceedings 7. Aachen-Dresden International Textile Conference, Dresden (2012)
SPICKENHEUER, A.: Zur fertigungsgerechten Auslegung von Faser-Kunststoff-Verbundbauteilen für den extremen Leichtbau auf Basis des variabelaxialien Fadenablageverfahrens Tailored Fiber Placement. Dresden, Leibnitz-Institut für Polymerforschung Dresden e. V., Dissertation, 2014
UHLIG, K.; SPICKENHEUER, A.; BITTRICH, L.; HEINRICH, G.: Development of a highly stressed bladed rotor made of CFRP using the tailored fiber placement technology. In: Mechanics of Composite Materials 49 (2013), No. 2
UHLIG, K.: Wege zum inflitrierten TFP-Bauteil. In: Proceddings. 1. TFP - Workshop 2012 - Tailored Fiber Placement meets Industrial Partners, Dresden, 2012
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Schade, M. (2016). Embroidered Semi-finished Products and Embroidery Techniques. In: Cherif, C. (eds) Textile Materials for Lightweight Constructions. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-46341-3_10
Download citation
DOI: https://doi.org/10.1007/978-3-662-46341-3_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-46340-6
Online ISBN: 978-3-662-46341-3
eBook Packages: EngineeringEngineering (R0)