Abstract
Preventive and corrective maintenance are, inter alia, the dominant influences for the Life Cycle Cost of machinery. Within the paper we will show an approach to support the prediction of corrective maintenance actions during the design phase of a machine with a CDA-FMEA (combined design and availability failure mode and effect analysis). Additionally the results can be used as an input for the Life Cycle Cost analysis of the machinery.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Schiller, U., Keimer, I., Egle, U., Keune, H.: Kostenmanagement in der Schweiz. Eine empirische Studie. Controlling 6, 301–307 (2007)
Held, S., Kijak-Kolesnik, O., Uhlenbroch, R.: Strategisches Kostenmanagement. Anwendungsstand bei den 500 umsatzstärksten deutschen Unternehmen. Beiträge zur Umweltwirtschaft und zum Controlling 35 (2009)
Henzelmann, T., Büchele, R.: Ergebnisse der Studie vom Oktober 2009. In: VDMA – Verband Deutscher Maschinen- und Anlagenbau, Roland Berger Strategy Consultants (Hrsg.): Der Beitrag des Maschinen- und Anlagenbaus zur Energieeffizienz (2009)
Eneparantza, E., Revilla, O., Azakarate, A., Zendola, J.: A Life Cycle Cost Calculation and Management for Machine Tools. In: Proceedings of the 13th CIRP Conference on Life Cycle Engineering, Leuven, Belgium, pp. 417–722 (2006)
DIN EN 60300-3-3: Dependability Management – Part3-3: Life cycle cost analysis – Application guide (2005)
VDI 2884: Beschaffung, Betrieb und Instandhaltung von Produktionsmitteln unter Anwendung von Life Cycle Costing, Beuth, Berlin (2005)
VDMA Einheitsblatt 31460: Prognosemodell für die Lebenszykluskosten von Maschinen und Anlagen, Beuth, Berlin (June 2006)
Fleischer, J., Wawerla, M.: Abschlussbericht ViLMA. Verfügbarkeit im Lebenszyklus von Maschinen und Anlagen. wbk Institut für Produktionstechnik der Universität Karlsruhe (2007)
Bredehöft, J.P.: Bedeutung von ”Total Cost of Ownership“ für die BASF. Life Cycle Costing Fraunhofer IPA Tagung (2008)
Zarbock, D., Bachem, W.: Optimiertes Aggregate Management – Das “ von Aggregaten und das Bündeln“ von Leistungen ist eine Chance zur Kostensenkung. In: Reichel, J., Mandelartz, J., Müller, G. (eds.) Betriebliche Instandhaltung, Betriebliche Instandhaltung. Springer, Berlin (2009)
Dimache, A., Dimache, L., Zolda, E., Roche, T.: Life Cycle Cost Estimation Tool for Decision-Making in the Early Phases of the Design Process. In: Proceedings of the 14th CIRP International Conference on Life Cycle Engineering, Tokyo, Japan, pp. 456–459 (2007)
Kondoh, S., Masui, K., Mishima, N., Matsumoto, M.: Total performance analysis of product life cycle considering the uncertainties in product-use stage. In: Proceedings of the 14th CIRP International Conference on Life Cycle Engineering, Tokyo, Japan, pp. 371–376 (2007)
Lanza, G., Rühl, J.: Simulation of service costs throughout the life cycle of production facilities. CIRP Journal of Manufacturing Science and Technology 1(4), 247–253 (2009)
Fleischer, J., Wawerla, M., Niggeschmidt, S.: Machine Life Cycle Cost Estimation via Monte-Carlo Simulation. In: Proceedings of the 14th CIRP International Conference on Life Cycle Engineering, Tokyo, Japan, pp. 449–453 (2007)
Aurich, J.C., Schweitzer, E., Gu, Z., Naab, C.: An Approach to Life Cycle Cost Estimation for New Developed Manufacturing Processes. In: Proceedings of the 15th CIRP International Conference on Life Cycle Engineering, Sidney, Australia, pp. 258–263 (2008)
Fleischer, J., Wawerla, M., Niggeschmidt, S.: Bedeutung von Life Cycle Cost im Werkzeugmaschinenbau. VDMA-Nachrichten, 42–43 (May 2006)
MIL-P-1629: Procedures for Performing a Failure Mode, Effects and Criticality Analysis. U.S. Department of Defense (1949)
Volkmann, M.: Marktorientierung und methodische Unterstützung von (Neu-) Produktentwicklung in der Praxis. In: Spath, D. (ed.) Baden-Württemberg/Ministerium für Wissenschaft, Forschung und Kunst: Vom Markt zum Produkt: Impulse für die Innovationen von morgen, pp. 35–49. LOG X Verlag, Stuttgart (2001)
Verband der Automobilindustrie: Band 4 Kap. 03: Produkt- und Prozess FMEA. VDA Frankfurt/M (2006)
DIN EN 60812: Analysetechniken für die Funktionsfähigkeit von Systemen - Verfahren für die Fehlzustandsart- und -auswirkungsanalyse (FMEA) (IEC 60812:2006)/Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) (2006)
Mueller, R.H.: Design For Warranty Cost Reduction. In: Annual Reliability and Maintainability Symposium, pp. 200–205. IEEE Press Books, New York (2009)
Kmenta, S., Ishii, K.: Scenario-based FMEA: a life cycle cost perspective. In: Proceedings of ASME Design Engineering Technical Conference DECT 2000, Baltimore, USA (2000)
SAE J1739: Potential Failure Mode and Effect Analysis in Design (Design FMEA), Potential Failure Mode and Effect Analysis in Manufacturing and Assembly Processes (Process FMEA), and Potential Failure Mode and Effect Analysis for Machinery (Machinery FMEA) (2002)
Peiffer, K., Zinser, H., Schloske, A.: Stillstand kostet: Kombinierte Konstruktions- und Verfügbarkeits-FMEA erhöht die Anlagenverfügbarkeit. In: Qualität und Zuverlässigkeit QZ: Organ der Deutschen Gesellschaft für Qualität und der DQS GmbH 42, vol. 9, pp. 997–998 (1997)
Bertsche, B., Lechner, G.: Zuverlässigkeit im Fahrzeug- und Maschinenbau: Ermittlung von Bauteil- und System-Zuverlässigkeiten, vol. 3. Springer, Berlin (2004)
Birolini, A.: Reliability Engineering; Theory and Practice, 4th edn. Springer, Berlin (2004)
VDI 3585: Verfügbarkeit von Transport- und Lageranlagen sowie deren Teilsysteme und Elemente, Beuth, Berlin (December 2004)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Mannuß, O., Schloske, A., Bauernhansl, T. (2012). Availability Focused Risk Analysis to Support Life Cycle Costing Prognosis. In: Dornfeld, D., Linke, B. (eds) Leveraging Technology for a Sustainable World. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-29069-5_84
Download citation
DOI: https://doi.org/10.1007/978-3-642-29069-5_84
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-29068-8
Online ISBN: 978-3-642-29069-5
eBook Packages: EngineeringEngineering (R0)