Abstract
The conversion of the kinetic energy in the air stream flowing through the rotor is determined by aerodynamics and by the type of lightweight design employed. Thus there are associations with aircraft engineering. A look into the nacelle provides a completely different picture. The components for converting mechanical energy into electrical energy represent ”conventional” power plant technology, as it were. But a conclusion that this area would be ”state-of-the-art” and that it should, therefore, not pose any particular problems is not completely true.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Rybak, S.C.: Description of the 3 MW SWT-3 Wind Turbine. In: Bendix Corporation Energy, Environment and Technology Office, San Gorgonio Pass, California (1981)
Schoo, A.: Überlagerungsgetriebe zur stufenlosen Drehzahlregelung im praktischen Einsatz. Thyssen Getriebe-Werk Kassel (1988)
Hofmann, H., et al.: Status der Voith-Windkraftanlage WEC-520. KFA-Statusseminar, Jülich (1981)
Erdmann, N.: Offshore-Windenergieanlage MULTIBRID M500, Erneuerbare Energien (October 2004)
National Swedish Board for Energy Source Development: The National Swedish Wind Energy Program (1982)
Central Electricity Generating Board (CEGB): The Richborough 1 MW Wind Turbine Design Report (1988)
Lagerwey: Design Documents (2001)
Osterholz, H.: Innovatives Pitchsystem mit erhöhter Verfügbarkeit. Osterholz Antriebstechnik GmbH, Company Documents (May 2006)
Göbel, W.: Der Einfluß dynamischer Analysen auf die Entwicklung moderner Lagerungskonzepte für WKA’s. Wind Kraft Journal (April 2003)
Thornblad, P.: Gears for Wind Power Plants. In: Second International Symposium on Wind Energy Systems, Amsterdam, October 3-6 (1978)
Niemann, G.: Maschinenelemente. Bd. II. Springer, Berlin (1961)
Lloyd, G.: Vorschriften und Richtlinien, IV - Nichtmaritime Technik, Teil I - Windenergie, Richtlinie für die Zertifizierung von Windkraftanlagen (1993)
Bauer, E.: Windenergieanlagen-Schadenbetrachtungen. Allianz Zentrum für Technik GmbH, Allianz Report (February 2001)
DIN 3990 Teil 1-4: Grundlagen für die Tragfahigkeitsberechnung von Gerad- und Schrägstirnrädern, Draft (March 1980)
AGMA 218.01: For Rating the Pitting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth (December 1982)
Hersmeier, J., Godecke, G., Assmann, C., Gold, P.W.: Untersuchung der Leerlaufverluste in einem Planetengetriebe für Windkraftanlagen mit mineralölbasischen und biologisch schnell abbaubaren Schmierstoffen. VDI Report No. 1460 (1999)
Lindley, D.: The 250 kW and 3 MW Wind Turbines on Burgar Hill. In: Proc. Instn. Mech. Engrs., Orkney, vol. 198A(9) (1984)
SET: 3MW Prmmototyp für ein elektro–mechanisches Differentialsystem. Wind-Kraft Journal. Verlag Natürliche Energie, Seevetal (January 2011)
Voith: WinDrive, Technical document. Voith Turbo GmbH, Crailsheim (2005)
Boeing Engineering and Construction: MOD-2 Wind Turbine System Development. Final Report, Seattle, Washington (1988)
Engstroem, S.: Soft Yaw Drive for Wind Turbines, Agir Consult AB, Swedish patent No. 9601743-9 (1996)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Hau, E. (2013). Mechanical Drive Train and Nacelle. In: Wind Turbines. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-27151-9_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-27151-9_9
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-27150-2
Online ISBN: 978-3-642-27151-9
eBook Packages: EngineeringEngineering (R0)