Synonyms
Definition
In the field of machining technology, the processes of deep hole drilling are defined for drilled boreholes with a length-to-diameter ratio of more than lt/D = 3 (VDI 3210), whereas in the industry deep hole drilling processes are often defined for drilling with length-to-diameter ratios of more than lt/D = 10, because conventional drilling tools are available up to this ratio. The field of deep hole drilling with small diameters or micro deep hole drilling is known as deep hole drilling with gun drills featuring a tool diameter smaller than d = 2 mm. In some cases deep hole drilling with tools smoothly bigger than d = 2 mm is also described as deep hole drilling with small diameters. For the production of deep holes with small diameters, there is a range of manufacturing processes existing, which differ with respect to the possible hole dimensions and quality, repeatability, processing times, as well as the economic...
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alting L, Kimura F, Hansen HN, Bissacco G (2003) Micro engineering. CIRP Ann Manuf Technol 2:635–657
Dausinger F (2001) Laserverfahren für Tieflochbohrungen im Mikrometerbereich (Laser processes for microdeep hole drilling). wt Werkstatttechnik online 1:20–24
Dausinger F (2004) Präsisionsbohren mit kurzen und ultrakurzen laserpulsen (Laser drilling using short and ultra-short pulsed laser systems). Laser Technik J 1:40–44
DIN ISO 5419 (1998) Spiralbohrer – benennungen, definitionen und formen (Twist drills – designations, definitions and geometries). Beuth, Berlin
Dornfeld D, Min S, Takeuchi Y (2008) Recent advances in mechanical micromachining. CIRP Ann Manuf Technol 2:745–768
Eichler R (1996) ProzeßsicherheitbeimEinlippenbohrenmitkleinstenDurchmessern (Process stability in single lip deep hole drilling with small diameters). Dissertation, Universität Stuttgart
Fink P (1977) Spanbildung und Bohrungsqualität beim Tiefbohren (Chip formation and hole quality in deep hole drilling). Dissertation, Universität Stuttgart
Heilmann M (2012) Tiefbohren mit kleinen Durchmessern durch mechanische und thermische Verfahren (Microdeep hole drilling using mechanical and thermal removal mechanisms). Dissertation, Technische Universität Dortmund
ISO 3292 (2004) Extra-long parallel shank twist drills
Lehner C, Kaiser E (2003) Laserbohren von Kühl- und Schmierlöchern (Laser drilling of cooling and lubrication holes). WB Werkstatt und Betrieb 6:59–61
Migliore L, Kardos G (2004) Laser choices for micromachining: drilling speed and quality comparison. In: LIA proceedings ICALEO, San Francisco
Okasha MM, Mativenga PT, Driver N, Li L (2010) Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application. CIRP Ann Manuf Technol 1:199–202
Pfleghar F (1976) Verbesserung der Bohrungsqualität beim Arbeiten mit Einlippen- tiefbohrwerkzeugen (Optimization of the bore in gun drilling processes). Dissertation, Universität Stuttgart
Poprawe R (2005) Lasertechnik für die Fertigung – Grundlagen, Perspektiven und Beispiele für den innovativen Ingenieur (Laser technology for manufacturing processes – basics, perspectives and examples for innovative engineers). Springer, Berlin
Streicher P (1973) Langschäftige Werkzeuge zum Tiefbohren – Ihre Problematik und deren Bewältigung (Long shanked tools for deep hole drilling – challenges and Solutions). Dissertation, Universität Stuttgart
VDI-Richtlinie 3208-Entwurf (2009) Tiefbohren mit Einlippenbohrern (Deep hole drilling with gun drills). Beuth, Berlin
VDI-Richtlinie 3210, Blatt 1 (2006) Tiefbohrverfahren (Deep hole drilling). Beuth, Berlin
VDI-Richtlinie 3211-Entwurf (2011) Tiefbohren auf Bearbeitungszentren (Deep hole drilling on machining centers). Beuth, Berlin
Zabel A, Heilmann M (2012) Deep hole drilling using tools with small diameters – process analysis and process design. CIRP Ann Manuf Technol 61:111–114
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 CIRP
About this entry
Cite this entry
Zabel, A. (2014). Deep Hole Drilling with Small Diameters. In: Laperrière, L., Reinhart, G. (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-20617-7_16683
Download citation
DOI: https://doi.org/10.1007/978-3-642-20617-7_16683
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-20616-0
Online ISBN: 978-3-642-20617-7
eBook Packages: EngineeringReference Module Computer Science and Engineering