Abstract
To demonstrate the low-noise quality of the Module 1 and 2 MC phono-amps their FFT spectral noise voltage density graphs were already given in Figs. 15.8 and 15.9. The following graphs show the engine’s broadband quality with frequency (F) and phase (P) responses (F = red/top trace + P = blue/bottom trace) of several input–output combinations as well as some additional spectral noise voltage density charts for the whole amp chain: from input connector via phono-amp and output stage to source-selector balanced output with +6.02 dB gain.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
- 2.
See Chap. 21 for more on that issue.
- 3.
Differences to Fig. 17.1: 1 kHz level is 6 dB lower; frequency range >1 kHz looks nearly the same, frequency range <1 kHz looks worse because of the 6 dB/oct low-frequency noise of the input E88CC-ln1, no hum artefacts.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Vogel, B. (2011). Engine Performance. In: The Sound of Silence. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-19774-1_29
Download citation
DOI: https://doi.org/10.1007/978-3-642-19774-1_29
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-19773-4
Online ISBN: 978-3-642-19774-1
eBook Packages: EngineeringEngineering (R0)